In <https://github.com/ollama/ollama/issues/11704#issuecomment-3177380197>
I noticed that hyphens in function names could possibly cause the model
to become confused. Later in that issue I found other explanations, but
at a minimum tool names with spaces in them are confusing to the model
because of the prompt format.
In this change I create a mapper that converts arbitrary tool names into
valid typescript identifiers. It's a little overly strict in that it
doesn't allow all unicode characters that might be valid in ts
identifiers, but it's still very permissive. Since mappings aren't
reversible, we must temporarily store this mapping in order to unmap it
if the model comes back with a call. We also handle the case where
multiple mappings collide into the same mapping and append a counter to
the end to make them unique
This changes the memory allocation strategy from upfront estimation to
tracking actual allocations done by the engine and reacting to that. The
goal is avoid issues caused by both under-estimation (crashing) and
over-estimation (low performance due to under-utilized GPUs).
It is currently opt-in and can be enabled for models running on the
Ollama engine by setting OLLAMA_NEW_ESTIMATES=1. Behavior in other
cases is unchanged and will continue to use the existing estimates.
* TEMPORARY: Update the llama.cpp upstream to my fork's Granite Four branch
This will be redone once my branch is merged upstream in llama.cpp
* feat: Update all patches
There are a number that are no longer needed at all:
- 0003-embeddings: Embeddings entirely overhauled on master
- 0008-ensure-KV-cache-is-fully-defragmented: KV caching entirely
overhauled on master
- 0019-metal-add-mean-kernel-14267: Merged upstream
- 0020-CUDA-add-mean-operation-14313: Merged upstream
* feat: Sync llama.cpp and ggml
* fix: Update rsync-filter for all moved/new/removed files
* fix: Add files missing from sync
* fix: Update ggml rsync-filter for new ggml-cpu/arch subdirs
* fix: Add ggml files missing from sync
* fix: Narrow llama.cpp rsync-filter to not include mtmd main tool cpp files
* fix: Remove mtmd main cpp files
* fix: Add missing include in sampling_ext.cpp
* fix: Update llama.go to use mtmd instead of clip/llava
* fix: Add patch for mtmd_input_text
* chore: Ignore *.patched in the patch directory
* fix: Fix support for arch-specific ggml-cpu source files with new arrangement
In https://github.com/ggml-org/llama.cpp/pull/13892, all arch-specific
implementations were split out into a nested tree structure under
ggml-cpu/arch. This conflicts with standard CGO layout where all
arch-specific source files are expected to live in the same directory as
the parent go module and use suffixes based on GOOS and GOARCH. As such,
there were really two options for getting this to work:
1. Add a patch on top of the GGML sync to rearrange the files to match the
GO layout convention
2. Use CGO directives to conditionally include the nested source files in
the compilation units
This commit does (2) in order to minimize the set of changes needed on top
of the upstream file layout. To get this to work, there are two key things
needed:
1. In cpu.go, #cgo directives are added to explicitly set __${GOARCH}__ in
the preprocessor directives
2. In arch-impls.c|cpp, use an #ifdef | #elif defined | #endif chain to
explicitly include the .c|.cpp files for the given architecture from the
nested directory
* fix: Use mtmd_helper to correctly load the bitmap for the image
* fix: Apply patch for mtmd_text_input
* fix: Add missing stb to llama.cpp rsync-filter
* fix: Add sync'ed stb vendored header
* fix: Use c++17 and include vendor for go wrapper modules
* fix: Update patch 0015 for upstream implementation of uuid
* feat: Bump to the latest tip of the branch
* fix: Update patches for bump
* feat: Bump back to the cenral repo and point at the latest master
This includes granite 4 and a number of other model architectures!
* fix: Revert changes to ggml export GPU UUID patch
* fix: Add patch for GGML_VERSION and GGML_COMMIT constants
* feat: Sync all patched code
* build: Include cmake/common.cmake in ggml sync
* build: Add top-level include for GNUINstallDirs in CMakeLists.txt
This is used to populate CMAKE_INSTALL_BINDIR
* fix: Add a patch to avoid power throttling API on non-msvc windows builds
* fix: Sync patch changes for ggml-cpu.c
* feat: Bump llama.cpp to 4a4f42
This picks up support for Kimi K2 and PLaMO-2
* feat: Sync llama.cpp
* fix: Handle multi-chunk image encodings from mtmd
* fix: Re-number patches after merge with `main`
* feat: Bump to 41e78c in the makefile
* fix: Fix Solar and argsort/copy patches after bump
* fix: Remove Gemma3n CUDA Graphs patch
It was implemented upstream:
https://github.com/ggml-org/llama.cpp/pull/14741
* feat: Sync llama.cpp / ggml after latest bump
* build: Remove unnecessary CFLAGS definitions in cpu.go
* fix: Remove unnecessary additions in the rsync-filter
* fix: Remove unused vendored code for chat template parsing
* Revert "fix: Remove Gemma3n CUDA Graphs patch"
This reverts commit d724caced3.
* fix: Update 0020 CUDA Graphs for gemma3n to keep both llama.cpp and ollama fixes
https://github.com/ollama/ollama/pull/11195#issuecomment-3137312394
* fix: Sync ggml-cuda.cu after keeping both style cuda graph fixes for gemma3n
* unwind mxfp4 patch
Prepare to bump ggml with their impl for mxfp4
* bump
* fix windows build error
* Convert tensors at load time
Repack the mxfp4 tensors as ggmls kernels expect them to be.
* convert mlp bf16 to f32
* buffer the conversion better
* reshape earlier
* openai swiglu
* add ids
* split qkv, gate_up
* fix nested alt tags
* fast attention
* remove debug messages
* fix lint
* remove redundant test
* remap values only if source/target are different
* add back i32->i32 copy
* refactor cpu quants
* clean up vendor
* update patch instructions
* clean up patches
* remove webgpu
* update mem
* also handle gpt-oss
* revert convert changes
---------
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
Co-authored-by: Gabe Goodhart <ghart@us.ibm.com>
Co-authored-by: Daniel Hiltgen <daniel@ollama.com>
gpt-oss works best with a context length of at least 8k. However,
for GPUs with limited amount of VRAM, there is a significant
performance hit to this increased context. In these cases, we
switch to the Ollama default of 4k
* bf16
* tests
* gpt-oss
* enable gptoss for engine
* rough estimate
* convert to mxfp4
* handle safetensors U8
* clamp glu/linear
* update tokenizer
* MXFP4 support
This implements the Open Compute Microscaling (MX) FP4 format
as a tensor type with backend implementations focusing
on mulmat and mulmatid on CPU, CUDA, and Metal.
* Unit tests for MXFP4 support
This exercises various operations and shapes on both CPU and GPU (if detected
on the system)
* cuda graph
* unit test adjustments
* cuda: optimize memory access
Read 4 bytes at a time (8 elements) when performing mul_mat_vec_mxfp4
* mac: fix crash on old macos versions
cblas_sgemm is only supported on v13.3 and up, however bf16 is
only supported on v14+ so we were falling back to ggml-blas and
crashing on bf16 tensors. Checking for the function being null
seems to be the simplest way to condittionally avoid registering the
backend.
* server: Minimum context length for gptoss
This model requires a minimum context length of 8192 to function
effectively. Users can set higher values through all normal mechanisms
but lower values will be silently reset.
* ggml: Multiply by numParallel for gptoss sliding window
When computing the graph size estimate, the context size is already
multiplied by numParallel so estimates reflect that. However, since
sliding window models use a smaller, fixed context size, they need
to manually take numParallel into account.
* gpt-oss integration
includes harmony parser and thinking levels, etc.
* fix sync
* fix tests
* fix lint
---------
Co-authored-by: Daniel Hiltgen <daniel@ollama.com>
Co-authored-by: Jesse Gross <jesse@ollama.com>
Co-authored-by: Devon Rifkin <drifkin@drifkin.net>
- Both `/api/generate` and `/api/chat` now accept a `"think"`
option that allows specifying whether thinking mode should be on or
not
- Templates get passed this new option so, e.g., qwen3's template can
put `/think` or `/no_think` in the system prompt depending on the
value of the setting
- Models' thinking support is inferred by inspecting model templates.
The prefix and suffix the parser uses to identify thinking support is
also automatically inferred from templates
- Thinking control & parsing is opt-in via the API to prevent breaking
existing API consumers. If the `"think"` option is not specified, the
behavior is unchanged from previous versions of ollama
- Add parsing for thinking blocks in both streaming/non-streaming mode
in both `/generate` and `/chat`
- Update the CLI to make use of these changes. Users can pass `--think`
or `--think=false` to control thinking, or during an interactive
session they can use the commands `/set think` or `/set nothink`
- A `--hidethinking` option has also been added to the CLI. This makes
it easy to use thinking in scripting scenarios like
`ollama run qwen3 --think --hidethinking "my question here"` where you
just want to see the answer but still want the benefits of thinking
models
the stream accumulator exits as soon as it sees `api.ProgressResponse(status="success")` which isn't strictly correctly
since some requests may have multiple successes, e.g. `/api/create` when the source model needs to be pulled.
* strip out thinking tags in message history for qwen3 & r1
This is in advance of "proper" support where we'll make reasoning
configurable and we'll parse out thinking/reasoning tags and provide
them to the caller. These models expect there to be no thinking tags in
the message history, so this should improve quality
* parse model names instead of hacky prefix check
No functional change. Many different done reasons can be set at the runner
level, so rather than obsuring them we should return them to the server
process and let it choose what to do with the done reason. This separates
the API concerns from the runner.
With support for multimodal models becoming more varied and common it is important for clients to be able to easily see what capabilities a model has. Retuning these from the show endpoint will allow clients to easily see what a model can do.
Add metadata and tensor information to the show command to be able to
see more information about a model. This outputs the same data as
shown on the model details page on ollama.com
This commit replaces the old pull implementation in the server package
with the new, faster, more robust pull implementation in the registry
package.
The new endpoint, and now the remove endpoint too, are behind the
feature gate "client2" enabled only by setting the OLLAMA_EXPERIMENT
environment variable include "client2".
Currently, the progress indication is wired to perform the same as the
previous implementation to avoid making changes to the CLI, and because
the status reports happen at the start of the download, and the end of
the write to disk, the progress indication is not as smooth as it could
be. This is a known issue and will be addressed in a future change.
This implementation may be ~0.5-1.0% slower in rare cases, depending on
network and disk speed, but is generally MUCH faster and more robust
than the its predecessor in all other cases.
* Include unified vision layers in memory prediction
For newer vision models with a single gguf, include
the projection estimates.
* Adjust CLI to handle both styles of vision model metadata
* Wire up new tokenizers for new engine
If we're loading the new engine, utilize the new model
text processor instead of calling into cgo wrappers for
llama.cpp. This also cleans up some tech debt from the
older tokenization flow for the C++ server which was
no longer used.
This also adjusts the grammar handling logic to pass
through to the new engine instead of utilizing the cgo
schema to grammar call.
* Lay foundation for auto selection of new engine
This reintroduces aggressive pruning on model deletion as a temporary
measure until a more controlled garbage collection (GC) mechanism is
implemented.
Issues with the current approach:
1. Users may accidentally delete a model (`ollama rm llama3.3` instead
of `ollama rm llama3.2`), requiring a full re-download unless another
model references the same blobs.
2. Users may assume a deleted model is still referenced elsewhere, but
due to prior updates or deletions, the references no longer exist,
leading to unnecessary re-downloads.
Soon, we should implement a structured GC mechanism to retain
unreferenced blobs for a configurable period before removal, which will
run on "ollama rm" and other commands we deem appropriate.
Users that want to immediately remove unreferenced blobs can use a new
prune command that will allow them to specify the age and class of blobs
to remove.
Example usage:
# Run basic blob GC
$ ollama prune
# Remove unreferenced blobs older than 7 days
$ ollama prune --age 7d
# Remove all blobs, referenced or not, older than 7 days (and their manifests?)
$ ollama prune --age 7d --all
# Remove all unreferenced blobs immediately
$ ollama prune --age 0 --all
# Remove all blobs
$ ollama prune --age 0 --all
This should provide a safer and more predictable cleanup process.
Previously, using a Registry required a DiskCache to be passed in for
use in various methods. This was a bit cumbersome, as the DiskCache is
required for most operations, and the DefaultCache is used in most of
those cases. This change makes the DiskCache an optional field on the
Registry struct.
This also changes DefaultCache to initialize on first use. This is to
not burden clients with the cost of creating a new cache per use, or
having to hold onto a cache for the lifetime of the Registry.
Also, slip in some minor docs updates for Trace.
This commit introduces a new API implementation for handling
interactions with the registry and the local model cache. The new API is
located in server/internal/registry. The package name is "registry" and
should be considered temporary; it is hidden and not bleeding outside of
the server package. As the commits roll in, we'll start consuming more
of the API and then let reverse osmosis take effect, at which point it
will surface closer to the root level packages as much as needed.
The route assembly in Handler lacked clear organization making it
difficult scan for routes and their relationships to each other. This
commit aims to fix that by reordering the assembly of routes to group
them by category and purpose.
Also, be more specific about what "config" refers to (it is about CORS
if you were wondering... I was.)
This provides integration with the new Ollama engine
(5824541 next ollama runner (#7913)) and the rest of the Ollama
infrastructure such as the runner and Ollama server.
In addition, it also builds out the KV cache infrastructure to
support requirements of how Ollama runs models such as:
- Parallel processing
- Memory management for defragmentation and shifting
- Multi-modal modals
Both old and new engines continue to be supported. By default, only
the old engine is used. To enable the new engine:
Start the server with the OLLAMA_NEW_ENGINE environment variable set:
OLLAMA_NEW_ENGINE=1 ./ollama serve
Start a model that is supported by the Ollama engine. This one is Llama 3.1 8b Q4_K_M:
./ollama run jessegross/llama3.1
feat: add new Ollama engine using ggml through cgo
This change introduces a new way to run pretrained models. It introduces 3 high level interfaces and a bunch of smaller helper interfaces to facilitate this.
- `model.Model` defines the interface for a model architecture. Models such as `llama` and `mllama`, which are provided as examples, can implement the model's forward propagation in the `Forward` method. This method will be called to generate completions. This interface can be found in `model/model.go`
- `ml.Backend` defines the interface for a backend tensor library, in this case `ggml`. Among other things, a Backend is responsible for loading a pretrained model into hardware (GPU, CPU, etc) and providing an interface for Models to access loaded tensors. This interface can be found in `ml/backend.go`
- `ml.Tensor` defines the interface for a tensor and tensor operations
This is the first implementation of the new engine. Follow up PRs will implement more features:
- non-greedy sampling (#8410)
- integration with Ollama and KV caching (#8301)
- more model support (#9080) with more coming soon
Co-authored-by: Bruce MacDonald <brucewmacdonald@gmail.com>
Michael Yang
jmorganca
Parth Sareen
Devon Rifkin
Jesse Gross
Patrick Devine
Daniel Hiltgen
JasonHonKL
Bruce MacDonald
CYJiang
Blake Mizerany
Lucas Hahn