openssl/doc/man3/SSL_CTX_set_security_level.pod

=pod

=head1 NAME

SSL_CTX_set_security_level, SSL_set_security_level, SSL_CTX_get_security_level, SSL_get_security_level, SSL_CTX_set_security_callback, SSL_set_security_callback, SSL_CTX_get_security_callback, SSL_get_security_callback, SSL_CTX_set0_security_ex_data, SSL_set0_security_ex_data, SSL_CTX_get0_security_ex_data, SSL_get0_security_ex_data - SSL/TLS security framework

=head1 SYNOPSIS

 #include <openssl/ssl.h>

 void SSL_CTX_set_security_level(SSL_CTX *ctx, int level);
 void SSL_set_security_level(SSL *s, int level);

 int SSL_CTX_get_security_level(const SSL_CTX *ctx);
 int SSL_get_security_level(const SSL *s);

 void SSL_CTX_set_security_callback(SSL_CTX *ctx,
                                    int (*cb)(SSL *s, SSL_CTX *ctx, int op,
                                              int bits, int nid,
                                              void *other, void *ex));

 void SSL_set_security_callback(SSL *s, int (*cb)(SSL *s, SSL_CTX *ctx, int op,
                                                  int bits, int nid,
                                                  void *other, void *ex));

 int (*SSL_CTX_get_security_callback(const SSL_CTX *ctx))(SSL *s, SSL_CTX *ctx, int op,
                                                          int bits, int nid, void *other,
                                                          void *ex);
 int (*SSL_get_security_callback(const SSL *s))(SSL *s, SSL_CTX *ctx, int op,
                                                int bits, int nid, void *other,
                                                void *ex);

 void SSL_CTX_set0_security_ex_data(SSL_CTX *ctx, void *ex);
 void SSL_set0_security_ex_data(SSL *s, void *ex);

 void *SSL_CTX_get0_security_ex_data(const SSL_CTX *ctx);
 void *SSL_get0_security_ex_data(const SSL *s);

=head1 DESCRIPTION

The functions SSL_CTX_set_security_level() and SSL_set_security_level() set
the security level to B<level>. If not set the library default security level
is used.

The functions SSL_CTX_get_security_level() and SSL_get_security_level()
retrieve the current security level.

SSL_CTX_set_security_callback(), SSL_set_security_callback(),
SSL_CTX_get_security_callback() and SSL_get_security_callback() get or set
the security callback associated with B<ctx> or B<s>. If not set a default
security callback is used. The meaning of the parameters and the behaviour
of the default callbacks is described below.

SSL_CTX_set0_security_ex_data(), SSL_set0_security_ex_data(),
SSL_CTX_get0_security_ex_data() and SSL_get0_security_ex_data() set the
extra data pointer passed to the B<ex> parameter of the callback. This
value is passed to the callback verbatim and can be set to any convenient
application specific value.

=head1 DEFAULT CALLBACK BEHAVIOUR

If an application doesn't set its own security callback the default
callback is used. It is intended to provide sane defaults. The meaning
of each level is described below.

=over 4

=item B<Level 0>

Everything is permitted. This retains compatibility with previous versions of
OpenSSL.

=item B<Level 1>

The security level corresponds to a minimum of 80 bits of security. Any
parameters offering below 80 bits of security are excluded. As a result RSA,
DSA and DH keys shorter than 1024 bits and ECC keys shorter than 160 bits
are prohibited. All export cipher suites are prohibited since they all offer
less than 80 bits of security. SSL version 2 is prohibited. Any cipher suite
using MD5 for the MAC is also prohibited.

=item B<Level 2>

Security level set to 112 bits of security. As a result RSA, DSA and DH keys
shorter than 2048 bits and ECC keys shorter than 224 bits are prohibited.
In addition to the level 1 exclusions any cipher suite using RC4 is also
prohibited. SSL version 3 is also not allowed. Compression is disabled.

=item B<Level 3>

Security level set to 128 bits of security. As a result RSA, DSA and DH keys
shorter than 3072 bits and ECC keys shorter than 256 bits are prohibited.
In addition to the level 2 exclusions cipher suites not offering forward
secrecy are prohibited. TLS versions below 1.1 are not permitted. Session
tickets are disabled.

=item B<Level 4>

Security level set to 192 bits of security. As a result RSA, DSA and
DH keys shorter than 7680 bits and ECC keys shorter than 384 bits are
prohibited.  Cipher suites using SHA1 for the MAC are prohibited. TLS
versions below 1.2 are not permitted.

=item B<Level 5>

Security level set to 256 bits of security. As a result RSA, DSA and DH keys
shorter than 15360 bits and ECC keys shorter than 512 bits are prohibited.

=back

=head1 APPLICATION DEFINED SECURITY CALLBACKS

I<Documentation to be provided.>

=head1 NOTES

B<WARNING> at this time setting the security level higher than 1 for
general internet use is likely to cause B<considerable> interoperability
issues and is not recommended. This is because the B<SHA1> algorithm
is very widely used in certificates and will be rejected at levels
higher than 1 because it only offers 80 bits of security.

The default security level can be configured when OpenSSL is compiled by
setting B<-DOPENSSL_TLS_SECURITY_LEVEL=level>. If not set then 1 is used.

The security framework disables or reject parameters inconsistent with the
set security level. In the past this was difficult as applications had to set
a number of distinct parameters (supported ciphers, supported curves supported
signature algorithms) to achieve this end and some cases (DH parameter size
for example) could not be checked at all.

By setting an appropriate security level much of this complexity can be
avoided.

The bits of security limits affect all relevant parameters including
cipher suite encryption algorithms, supported ECC curves, supported
signature algorithms, DH parameter sizes, certificate key sizes and
signature algorithms. This limit applies no matter what other custom
settings an application has set: so if the cipher suite is set to B<ALL>
then only cipher suites consistent with the security level are permissible.

See SP800-57 for how the security limits are related to individual
algorithms.

Some security levels require large key sizes for non-ECC public key
algorithms which can severely degrade performance. For example 256 bits
of security requires the use of RSA keys of at least 15360 bits in size.

Some restrictions can be gracefully handled: for example cipher suites
offering insufficient security are not sent by the client and will not
be selected by the server. Other restrictions such as the peer certificate
key size or the DH parameter size will abort the handshake with a fatal
alert.

Attempts to set certificates or parameters with insufficient security are
also blocked. For example trying to set a certificate using a 512 bit RSA
key using SSL_CTX_use_certificate() at level 1. Applications which do not
check the return values for errors will misbehave: for example it might
appear that a certificate is not set at all because it had been rejected.

=head1 RETURN VALUES

SSL_CTX_set_security_level() and SSL_set_security_level() do not return values.

SSL_CTX_get_security_level() and SSL_get_security_level() return a integer that
represents the security level with B<SSL_CTX> or B<SSL>, respectively.

SSL_CTX_set_security_callback() and SSL_set_security_callback() do not return
values.

SSL_CTX_get_security_callback() and SSL_get_security_callback() return the pointer
to the security callback or NULL if the callback is not set.

SSL_CTX_get0_security_ex_data() and SSL_get0_security_ex_data() return the extra
data pointer or NULL if the ex data is not set.

=head1 HISTORY

These functions were added in OpenSSL 1.1.0.

=head1 COPYRIGHT

Copyright 2014-2018 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the Apache License 2.0 (the "License").  You may not use
this file except in compliance with the License.  You can obtain a copy
in the file LICENSE in the source distribution or at
L<https://www.openssl.org/source/license.html>.

=cut