Raise errors when appropriate.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21700)
In some cases where a FIN has been received but with no data quic_read_actual
was failing to raise SSL_ERROR_ZERO_RETURN. This meant that we could end up
blocking in SSL_read(_ex) for too long.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21780)
For some of the items we add FUTURE/SERVER/TESTING/MULTIPATH
designation to indicate these do not need to be resolved
in QUIC MVP release.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21539)
If we shutdown the QUIC connection then we should mark the underlying
TLS SSL object as shutdown as well. Otherwise any sessions are considered
unusable for resumption.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21591)
s_client calls SSL_has_pending() even before the connection has been
established. We expect it to return 0 in this case and not put any errors
on the stack.
We change things so that SSL_has_pending() always returns 0 if there is
no stream available.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21578)
A call to SSL_write() with a zero length buffer should still advance the
handshake. Applications (including s_client) may rely on this.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21578)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
...
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21381)
We save the error state from the thread that encountered
a permanent error condition caused by system or internal
error to the QUIC_CHANNEL.
Then we restore it whenever we are returning to a user
call when protocol is shutdown.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
We return SSL_ERROR_SYSCALL when network error is encountered.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
QUIC differs from TLS in this regard because it buffers the
data to be sent. TLS just encrypts the data to send in place.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21311)
Fix supplied by Hugo Landau.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21204)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
We create setter functions for the msg_callback and msg_callback_arg so
that these values can be properly propagated to the QRX/QTX/TXP even
after the channel has been created.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
At this stage we just support msg_callback on receipt of a datagram.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
This refactors the error raising code in the APL to automatically raise
errors in the correct SSL object, either a QCSO or QSSO depending on the
circumstances. The QCTX structure's responsibilities are expanded to
facilitate this. This further drives towards a unified mechanism for
generic dispatch precondition checking and error raising.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20856)
Also use accept queue popping by the application as the retirement
event, i.e., as the cue to increase the limit.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
QUIC in single-stream mode could be used with a protocol where the
server writes first or the client writes first. This determines
whether the single stream would be client or server initiated,
which affects the stream ID allocated to the stream. We should support
both client-sends-first and server-sends-first application protocols.
Thus, defer default XSO creation until the point in time at which
we know whether a client-first or server-first application protocol
is being used. We do this by taking whether SSL_read() or SSL_write()
is called first as a cue.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
We switch to instantiating the QUIC_CHANNEL up front at QCSO
instantiation time. This creates the QUIC_STREAM_MAP early and makes it
easy for us to allocate streams prior to connection initiation. The role
(client or server) is determined at QCSO allocation time and cannot be
changed.
SSL_set_connect/accept_state() are still modelled but their usage must
be consistent with the chosen SSL_METHOD which dictates which role is
being used.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
In QUIC, we have an architectural need (in future, when we implement
0-RTT, etc.) to be able to create streams before we start connecting.
This requires we allocate a stream, including a stream ID, after
creating a QCSO but prior to connecting. However stream IDs are
dependent on whether the endpoint is in the client or server role,
therefore we must know whether we are going to be a client or server
before any pre-connection streams are created. Moreover, the originally
defined QUIC_client_method() and QUIC_server_method() functions heavily
implied the original plan was to have different SSL_METHODs for clients
and servers. Up until now we had been relying on
SSL_set_connect/accept_state() instead.
Solve these problems by basing client/server identity on whether
QUIC_server_method() is used (in future, when we support servers). This
ensures that once a QCSO is created its client/server identity are fixed
and cannot change, allowing pre-connection stream IDs, etc. to be
allocated.
Client/server uncertainty was the primary reason why QUIC_CHANNEL
creation was deferred until connection time up until now, so this
enables further refactoring to facilitate eager allocation of the
QUIC_CHANNEL at QCSO allocation time. This is important as allocating a
stream including its write buffers is hard without having the
QUIC_CHANNEL (which owns the QUIC_STREAM_MAP) in existence.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
We now refactor the interface between ssl_lib.c frontend functions and
the QUIC API Personality Layer so that the respective functions
comprising the interface use SSL object pointers rather than raw
QUIC_CONNECTION pointers. This is in preparation for stream support
since once streams are supported, calls to e.g. ossl_quic_write() may be
made on a QUIC_CONNECTION or a QUIC_XSO (that is, a stream object). Thus
we take a uniform approach across all functions comprising the interface
between the ssl_lib.c frontend and the QUIC API Personality Layer of
using SSL pointers always. This provides a uniform approach and
ensures that any function of the API personality layer can be easily
adapted to support being called on a stream object in the future.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
Uniform changes to all dispatch functions to use the new dispatch
functionality follows this commit. Separated into a core commit
and a commit containing the uniform pattern (monotonous) changes
for ease of review.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
For example if would be helpful if we got more useful information if the
caller forgot to set the peer address.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
If the QUIC oject receives a ctrl it does not recognise, the chances are
it is intended for the underlying SSL object - so we forward unknown ctrls
there.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
QUIC TLS was sending some ciphersuites twice in the ClientHello. This
was due to us declaring some TLSv1.3 ciphersuites in the list intended to
describe the TLSv1.2 ciphersuites supported by the SSL_METHOD.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20148)
We enable querying of the termination reason which is useful for tests.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
The user_ssl field in an SSL_CONNECTION is no longer used - so remove it.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
We start using the QUIC TLS implementation rather than the dummy one.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
The "user" SSL object which represents the QUIC connection should have an
"inner" SSL object to represent the TLS connection.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
Also add internal functionality to get a QUIC_CONNECTION pointer from
an SSL pointer, and setters / getters for the GQX and ACKM fields.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18838)
This is instead of time_t and struct timeval. Some public APIs mandate a
presence of these two types, but they are converted to OSSL_TIME internally.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19082)
Make the SSL object polymorphic based on whether this is
a traditional SSL connection, QUIC connection, or later
to be implemented a QUIC stream.
It requires adding if after every SSL_CONNECTION_FROM_SSL() call
which itself has to be added to almost every public SSL_ API call.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18612)
This requires some code being pulled into the empty protocol
implementation so the state machinery works.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18307)
Hugo Landau
Tomas Mraz
Matt Caswell
Pauli
Richard Levitte