1071 Commits

Author	SHA1	Message	Date
Richard Levitte	da9fd71ab6	Make generated files read-only ... This is an attempt to discouraged manual changes of generated files, as people have done so, just to get their changes over-written next time those files are re-generated. Reference: https://github.com/openssl/openssl/discussions/28269 Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/28612)	2025-09-20 19:06:32 +02:00
Enji Cooper	2c0c9c83b2	Make the Unix build process more repeatable ... Before this change all manpages would contain the date when pod2man was run. This resulted in outputs that differed between builds--or potentially across a single build if the host clock "ticked" to the next day when the build was being run. This commit modifies the manpage generation process as follows: - The date all manpages were generated will be normalized to a single date. - The release date specified in `VERSION.dat` is used instead of the date/time when `pod2man` was executed OR--in the event a date isn't specified in `VERSION.dat`--the time when the Makefiles were last regenerated. Embedding a consistent date into the generated manpages helps ensure that the build process as a whole is more repeatable and helps ensure that release versions of OpenSSL create artifacts consistent with the date that the official release was cut. Co-authored-by: Richard Levitte <levitte@openssl.org> Signed-off-by: Enji Cooper <yaneurabeya@gmail.com> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/28449)	2025-09-09 11:37:19 +02:00
Pavol Žáčik	b7e4e17645	Add targets to skip build of non-installable programs ... These make it possible to split the build into two parts, e.g., when tests should be built with different compiler flags than installed software. Also use these as dependecies where appropriate. Reviewed-by: Paul Yang <paulyang.inf@gmail.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Neil Horman <nhorman@openssl.org> (Merged from https://github.com/openssl/openssl/pull/28302)	2025-08-29 09:01:47 -04:00
vkryl	3ec265978c	Android: Enable 16 KB ELF alignment for `arm64-v8a` and `x86_64` platforms ... CLA: trivial Reviewed-by: Hugo Landau <hlandau@devever.net> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Saša Nedvědický <sashan@openssl.org> (Merged from https://github.com/openssl/openssl/pull/28277)	2025-08-22 09:16:09 +02:00
Dmitry Belyavskiy	eec435695e	We should not remove symlinks in submodules ... Fixes #28285 Reviewed-by: Hugo Landau <hlandau@devever.net> Reviewed-by: Paul Dale <ppzgs1@gmail.com> (Merged from https://github.com/openssl/openssl/pull/28286)	2025-08-18 11:14:14 +02:00
Eugene Syromiatnikov	2c59dc9029	Call ctags on *.inc files as well ... There are some *.inc already in the repository, mostly in demos/tests and related to some algorithm implementations. Introduction of array_alloc.inc has made including these files in the tags generation even more pertinent, so they are included now. Also, this commit explicitly marks *.h files as containing C code, overriding universal-ctags default of interpreting them as C++/ObjectiveC ones. Suggested-by: Neil Horman <nhorman@openssl.org> Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Neil Horman <nhorman@openssl.org> (Merged from https://github.com/openssl/openssl/pull/28059)	2025-08-08 12:22:10 -04:00
GAlvare	7eee9d543e	Fixes for build failures on OS X 10.4 Tiger ... Also added darwin8-ppc-cc and darwin8-ppc64-cc build configurations for handling OS X 10.4 PowerPC specific configuration options, specifically disabling async by default. Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by: Paul Dale <ppzgs1@gmail.com> (Merged from https://github.com/openssl/openssl/pull/27578)	2025-08-08 13:56:02 +02:00
Norbert Pocs	758ca8acf0	unix-Makefile.tmpl: Run find-doc-nits with env var checker too ... Signed-off-by: Norbert Pocs <norbertp@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> (Merged from https://github.com/openssl/openssl/pull/28025)	2025-07-29 13:12:11 -04:00
Neil Horman	517c1d6fa0	Add .[ch].in files to ctags ... Pull in our templates for various c and h files for searching Fixes #27966 Reviewed-by: Paul Yang <paulyang.inf@gmail.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Paul Dale <ppzgs1@gmail.com> (Merged from https://github.com/openssl/openssl/pull/27967)	2025-07-06 12:05:48 -04:00
Neil Horman	03839dc6ef	Add a target to generate local coverage reports ... Add a target to allow developers to generate coverage reports for a build like coveralls does. This will let us identify rarely used branches when doing development, so that we can optimize them. Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> (Merged from https://github.com/openssl/openssl/pull/27839)	2025-06-20 06:40:14 -04:00
Neil Horman	78051ae9e5	Add target for local coverage report generation ... Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> (Merged from https://github.com/openssl/openssl/pull/27839)	2025-06-20 06:40:14 -04:00
Neil Horman	1187df5328	Add branch coverage to our coveralls run ... Coveralls is capable of reporting not only covered lines in a build, but also the number of times a given branch was taken vs. not taken. This will help us identify locations where we might make better use of the openssl_likely and openssl_unlikely macros to optimize branch prediction when building openssl Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> (Merged from https://github.com/openssl/openssl/pull/27839)	2025-06-20 06:40:14 -04:00
Neil Horman	d8277a6fba	Add pgo build type ... One of the ways we can optimize our builds is with profile guided optimization. This entails doing several things: 1) Building with --coverage 2) Running an application against the openssl library from step (1) to generate profile data 3) rebuilding openssl using the input profile from step (2) to optimize the build. This new build configuration will let developers use the profiled data to see what type of optimizations might be possible, as well as giving end users the ability to squeeze a bit more performance out of openssl Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> (Merged from https://github.com/openssl/openssl/pull/27839)	2025-06-20 06:40:14 -04:00
20ioppolan	3f98e949d3	Removed references to vxworks because it is an unsupported platform ... Fixes #26558 Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/26630)	2025-05-05 16:13:35 +02:00
Lars Kanis	9da1a9c30e	Add a target config for MINGW on ARM64 ... This is necessary to build OpenSSL native on Windows on Arm64 with gcc or clang. It also works when cross compiling on Linux for aarch64-w64-windows-gnu. This patch is used since years on MSYS2: https://github.com/msys2/MINGW-packages/blob/master/mingw-w64-openssl/001-support-aarch64.patch Fixes #10533 Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/26605)	2025-05-05 15:07:47 +02:00
Martin Rauch	978a4e199d	Added quotes to mask spaces in the path when building ... Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/27495)	2025-04-28 17:30:37 +02:00
Neil Horman	29eb7e0689	Serialize install process to avoid multiple make depend operations ... If make install is run with a large -j value (make install -j N , where N < 1) We can run into a situation in which the install fails because multiple make depend operations are running in parallel, which will fail due to makefile rewriting. Serialize the install process to guarantee that those operations don't step on one another Fixes # 27074 Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> (Merged from https://github.com/openssl/openssl/pull/27388)	2025-04-16 16:13:02 -04:00
Neil Horman	4943ac7b88	Update dead links and e-mails our sources ... http://www.openssl.org/~appro/cryptogams/ is 404, update to https://github.com/dot-asm/cryptogams/ And clean up the boiler plate text around it. Replace stray usage of appro@openssl.org with github url. The email in question here is no longer valid, replace it with the corresponding github id for the user. Replace <appro\@fy.chalmers.se> with <https://github.com/dot-asm> Fix lots more dead emails addresses that we missed Remove reference urls that no longer exist. Just delete urls that 404 now, and have no obvious new link. Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Paul Yang <kaishen.yy@antfin.com> (Merged from https://github.com/openssl/openssl/pull/27073)	2025-03-26 15:40:02 +01:00
Ian Spence	d4430ef9fc	Delete include/openssl/asn1_mac.h ... See https://github.com/openssl/openssl/discussions/26886 Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/26900)	2025-03-01 09:27:54 -05:00
Auto Vincent	becc0078f8	Fix compile error when building VC-WIN64-CLANGASM-ARM target ... With MSVC v143, C++ Clang Compiler for Windows (18.1.8) there are many errors similar to: crypto\aes\libcrypto-lib-aesv8-armx.obj.asm:3795:7: error: unknown token in expression ld1 {v2.16b},[x0],#16 CLA: trivial Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/26603)	2025-02-06 17:29:39 +01:00
Семенов Герман	bbd1811663	Added configuration for Embarcadero-Borland Clang Compiler 64 (BCC64) ... Signed-off-by: Герман Семенов <GermanAizek@yandex.ru> Signed-off-by: Herman Semenov <GermanAizek@yandex.ru> Reviewed-by: Hugo Landau <hlandau@devever.net> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/23377)	2025-01-08 11:13:10 +01:00
Michael Baentsch	50ef944cd6	Fix missing HISTORY doc entries ... Also add a check to find-doc-nits for HISTORY sections. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/26188)	2024-12-18 17:23:57 +01:00
Orgad Shaneh	6288aa440c	Build: Fix circular object deps with old GCC ... When both -o and -MT are used, GCC 4.1 prints the object file twice in the dependency file. e.g.: foo.o foo.o: foo.c If the file name is long, then the second occurrence moves to the next line. e.g.: ssl/statem/libssl-shlib-statem_dtls.o \ ssl/statem/libssl-shlib-statem_dtls.o: ../ssl/statem/statem_dtls.c \ add-depends script scans one line at a time, so when the first line is processed, the object file becomes a dependency itself. Fix by removing -MT altogether. This also fixes makedepend for nonstop platform. Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/25455)	2024-09-17 07:19:33 +02:00
Randall S. Becker	ad1d0cc999	Add NonStop KLT Configuration for new platform kernel treading model. ... This fix supports the new NonStop KLT threading model, including configurations and documentation for using this model. Fixes: fix-24175 Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/25016)	2024-09-10 19:16:04 +02:00
Zhiqing Xie	d20cf21b20	Fix compile err when building VC-CLANG-WIN64-CLANGASM-ARM target ... The error happens with MSVC v143,C++ Clang Compiler for Windows(16.0.5) Error is "brackets expression not supported on this target" in libcrypto-shlib-bsaes-armv8.obj.asm Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/25293)	2024-08-29 15:38:57 +02:00
Neil Horman	a5d56626b9	Add debuginfo build target ... In the webinar we are currently producing on debugging openssl applications, we talk about ways to allow debugable binaries without having to ship all the debug DWARF information to production systems. Add an optional target to do that DWARF separation to aid users Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/25174)	2024-08-21 15:50:17 +02:00
Dimitri John Ledkov	b28b312804	jitter: add a new provider containing a jitter entropy source alone ... This entropy source can be used instead of SEED-SRC. Sample openssl.cnf configuration is provided. It is built as a separate provider, because it is likely to require less frequent updates than fips provider. The same build likely can span multiple generations of FIPS 140 standard revisions. Note that rand-instances currently chain from public/private instances to primary, prior to consuming the seed. Thus currently a unique ESV needs to be obtained, and resue of jitterentropy.a certificate is not possible as is. Separately a patch will be sent to allow for unchaining public/private RAND instances for the purpose of reusing ESV. Also I do wonder if it makes sense to create a fips variant of stock SEED-SRC entropy source, which in addition to using getrandom() also verifies that the kernel is operating in FIPS mode and thus is likely a validated entropy source. As in on Linux, check that /proc/sys/crypto/fips_enabled is set to 1, and similar checks on Windows / MacOS and so on. Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Paul Dale <pauli@openssl.org> (Merged from https://github.com/openssl/openssl/pull/24844)	2024-07-31 14:44:51 +10:00
Frederik Wedel-Heinen	070b6a9654	Allow shared iOS builds ... Fixes #24545 Reviewed-by: Todd Short <todd.short@me.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/24649)	2024-07-04 09:29:12 +02:00
sanumesh	7afa7731e9	Add aix-clang and aix64-clang configuration ... Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/24609)	2024-06-28 15:18:59 +02:00
Randall S. Becker	929fcc5712	Remove configuration targets and related documentation for Guardian builds. ... The intermediate configuration items to support Guardian builds are left in place as a convenience for users who want to set up configurations for Guardian on their own. Fixes: #22175 Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Todd Short <todd.short@me.com> (Merged from https://github.com/openssl/openssl/pull/24579)	2024-06-18 13:32:13 -04:00
Richard Levitte	f6b307d860	VMS: Redefine _XOPEN_SOURCE_EXTENDED with the value 1 ... Some versions if the VMS C system header files seem to require this. Fixes #24466 Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Todd Short <todd.short@me.com> (Merged from https://github.com/openssl/openssl/pull/24470)	2024-05-29 16:06:40 +02:00
Huiyue Xu	69bd5e4fff	Add linux-arm64ilp32-clang target ... While clang 15 config target by '--target', not cannot support '-mabi=ilp32', so add the linux-arm64ilp32-clang target. Signed-off-by: Huiyue Xu <xuhuiyue@huawei.com> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/22666)	2024-05-07 11:48:58 +02:00
Craig Lorentzen	1c4f968469	Security hardening: Expose Build flags for Position Independed Execution (PIE) ... Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/22596)	2024-05-06 10:56:17 +02:00
Richard Levitte	491bbb444c	VMS: Move defining _XOPEN_SOURCE and _XOPEN_SOURCE_EXTENDED to config target ... For all other platforms that need these macros defined, that's how it's done, so we have VMS follow suit. That avoids a crash between in source definitions and command line definitions on some other platforms. Fixes #24075 Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> (Merged from https://github.com/openssl/openssl/pull/24083) (cherry picked from commit 7f04bb065d)	2024-04-11 13:06:49 +02:00
Richard Levitte	a19553cd87	Diverse small VMS build fixups ... Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/24008) (cherry picked from commit 1a4b029af5)	2024-04-04 18:16:05 +02:00
Hamilton Chapman	aba6219346	Ensure `$(MAKE)` commands and `CFLAGS` are appropriately quoted in the Makefile. ... If a user's `make` command came from a path that contained a space then both the `$(MAKE)` variable (and parts of the generated `CFLAGS`, when building for iOS) would not be properly quoted and the build would fail. Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/23663)	2024-02-25 08:57:16 +01:00
John Kohl	b332dbb3ed	AIX: Implement shared_target = "aix-solib" support ... This builds shared libraries as libxxx.so, libxxx.so.ver and static libraries as libxxx.a. For shlib_variant builds, it builds libxxx.so, libxxxvariant.so.ver, and libxxxx.a. libxxx.so is a linker import library that directs the linker to embed a run-time dependency reference to libxxxvariant.so.ver. Only libxxxvariant.so.ver is needed at runtime. Fixes #21518 Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/21540)	2024-02-05 10:10:25 +01:00
Prashanth Swaminathan	2d321448b2	Add support in configuration for android-riscv64 ... Android is enabling support for the riscv64 ISA. Add a configuration option to support building for it, aligned with the existing linux-riscv64 configuration. Reviewed-by: Hugo Landau <hlandau@openssl.org> Reviewed-by: Todd Short <todd.short@me.com> (Merged from https://github.com/openssl/openssl/pull/23427)	2024-02-05 10:08:23 +01:00
Randall S. Becker	99fb31c167	Add atexit configuration option to using atexit() in libcrypto at build-time. ... This fixes an issue with a mix of atexit() usage in DLL and statically linked libcrypto that came out in the test suite on NonStop, which has slightly different DLL unload processing semantics compared to Linux. The change allows a build configuration to select whether to register OPENSSL_cleanup() with atexit() or not, so avoid situations where atexit() registration causes SIGSEGV. INSTALL.md and CHANGES.md have been modified to include and describe this option. The no-atexit option has been added to .github/workflows/run-checker-daily.yml. Fixes: #23135 Signed-of-by: Randall S. Becker <randall.becker@nexbridge.ca> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Todd Short <todd.short@me.com> (Merged from https://github.com/openssl/openssl/pull/23394)	2024-02-01 20:26:42 -05:00
Lars Schmertmann	5ed9a32a2a	Remove mios-simulator-version-min from default iOS configuration ... * iOS 6 and 7 got its last updates 2014. * Adding -mios-simulator-version-min=14.0 to the configure command leads to two occurences of this parameter during compilation. * So lets remove this values to allow a robust configuration from outside and avoid updates here in the future. CLA: trivial Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/23344)	2024-01-22 10:08:31 +01:00
Richard Levitte	8d8c1600ae	VMS: Add the missing -p32 and -p64 variants for x86_64 ... The pointer size support is already in the code, and is present for all other supported hardwares. Fixes #22899 Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> (Merged from https://github.com/openssl/openssl/pull/23081) (cherry picked from commit a43f253d58)	2024-01-08 07:28:19 +01:00
Richard Levitte	3077bfb78e	Fix VMS installation - update vmsconfig.pm for consistency ... An effort was made to update the VMS installation data to align with configuration data. This touched the script templates in VMS/, but didn't update the generation of vmsconfig.pm to match... and also missed a spot. This change adds the missing updates Ref: https://github.com/openssl/openssl/pull/16842 Fixes #22899 Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> (Merged from https://github.com/openssl/openssl/pull/23081) (cherry picked from commit 4058e121cb)	2024-01-08 07:28:19 +01:00
Xi Ruoyao	e1002c8472	Define L_ENDIAN for linux64-loongarch64 ... In commit d7c0fc5b1a we removed L_ENDIAN definition for guessed linux64-loongarch64 as it had caused an inconsistency between configurations with and without explicit specifying linux64-loongarch64. Now add it back to the proper location. Unlike MIPS or RISC-V, LoongArch is always little-endian [1]. By the way, change "LOONGARCH" to "LoongArch" in a comment as LOONGARCH should only appear in the identifiers of macros, constants, etc. [1]:https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#endian Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/23064)	2023-12-18 11:54:02 +01:00
Randall S. Becker	5cd1792016	Deprecate SPT threading support on NonStop. ... This fix removes explicit support for the SPT threading model in configurations. This also reverts commit f63e1b48ac that were required for SPT but broke other models. Fixes: #22798 Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Hugo Landau <hlandau@openssl.org> (Merged from https://github.com/openssl/openssl/pull/22807)	2023-12-12 10:39:54 -05:00
Richard Levitte	ae64a116f0	Add the 'run_tests' target to the Windows build file template as well ... For some reason, it was added to the Unix and VMS build templates, but Windows was forgotten. Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Todd Short <todd.short@me.com> (Merged from https://github.com/openssl/openssl/pull/22947)	2023-12-07 07:38:21 +01:00
Richard Levitte	f882753f43	Make sure that the test / tests build target run 'run_tests' last ... Fixes #22943 Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Todd Short <todd.short@me.com> (Merged from https://github.com/openssl/openssl/pull/22947)	2023-12-07 07:38:21 +01:00
Richard Levitte	c08b21a2c9	Remove the source directory .num targets ... $(SRCDIR)/util/libcrypto.num and $(SRCDIR)/util/libssl.num were made their own targets to have 'make ordinals' reproduce them (run mknum.pl) only if needed. Unfortunately, because the shared library linker scripts depend on these .num files, we suddenly have mknum.pl run at random times when building. Furthermore, this created a diamond dependency, which disturbs parallell building because multiple mknum.pl on the same file could run at the same time. This reverts commit 0e55c3ab8d. Fixes #21999 Partially fixes #22841 Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/22890)	2023-12-02 11:45:10 +01:00
Anders Jansson	6d552a5327	Fix typo in variable name ... Fix spelling $cppfags2 => $cppflags2 in file Configurations/windows-makefile.tmpl CLA: trivial Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/22771)	2023-11-21 13:58:41 +01:00
Richard Levitte	c768ccebc7	Add exporters for CMake ... CMake's older package finder, FindOpenSSL.cmake, does a best guess effort and doesn't always get it right. By CMake's own documentation, that's what such modules are (best effort attempts), and package producers are (strongly) encouraged to help out by producing and installing <PackageName>Config.cmake files to get a more deterministic configuration. The resulting OpenSSLConfig.cmake tries to mimic the result from CMake's FindOpenSSL.cmake, by using the same variable and imported target names. It also adds a few extra variables of its own, such as: OPENSSL_MODULES_DIR Indicates the default installation directory for OpenSSL loadable modules, such as providers. OPENSSL_RUNTIME_DIR Indicates the default runtime directory, where for example the openssl program is located. OPENSSL_PROGRAM Is the full directory-and-filename of the openssl program. The imported targets OpenSSL::Crypto and OpenSSL::SSL are as precisely specified as possible, so for example, they are specified with the both the import library and the DLL on Windows, which should make life easier on that platform. For the moment, one of the following must be done in your CMake project for this CMake configuration to take priority over CMake's FindOpenSSL.cmake: - The variable CMAKE_FIND_PACKAGE_PREFER_CONFIG must be set to true prior to the 'find_package(OpenSSL)' call. - The 'find_package' call itself must use the "Full Signature". If you don't know any better, simply add the 'CONFIG' option, i.e. from this example: find_package(OpenSSL 3.0 REQUIRED) to this: find_package(OpenSSL 3.0 REQUIRED CONFIG) Just as with the 'pkg-config' exporters, two variants of the .cmake files are produced: - Those in 'exporters/' are installed in the location that 'pkg-config' itself prefers for installed packages. - Those in the top directory are to be used when it's desirable to build directly against an OpenSSL build tree. Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/20878)	2023-11-15 08:22:29 +01:00
Richard Levitte	2ac569a67b	Clean up exporters, specifically those we have for pkg-config ... The pkg-config exporters were a special hack, all in Configurations/unix-Makefile.tmpl, and this was well and good as long as that was the only main package interface configuration system that we cared about. Things have changed, though, so we move the pkg-config production to be templatable in a more flexible manner. Additional templates for other interface configuration systems can then be added fairly easily. Two variants of the .pc files are produced: - Those in 'exporters/' are installed in the location that 'pkg-config' itself prefers for installed packages. - Those in the top directory are to be used when it's desirable to build directly against an OpenSSL build tree. Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> (Merged from https://github.com/openssl/openssl/pull/20878)	2023-11-15 08:22:29 +01:00