Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20832)
(cherry picked from commit 2d6585986f)
Fix only typos in doc/man* for inclusion in 3.* branches.
Other typos have been fixed in a different commit.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20924)
(cherry picked from commit 9a271795f8)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20848)
(cherry picked from commit 25bab273cc)
The function was incorrectly documented as enabling policy checking.
Fixes: CVE-2023-0466
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20562)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20204)
(cherry picked from commit b75d56dee0)
The documentation didn't mention the development where EVP_PKEY_get_id()
returns a negative value for provider-only implementations, and the
migration guide didn't mention how to cope with that.
Fixes#20497
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20501)
(cherry picked from commit a2a543e0e3)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20277)
(cherry picked from commit d5e50bdf87)
remove unneeded const qualifier to keep method declaration
and definition in sync.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20436)
(cherry picked from commit 6f792f4d27)
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20436)
(cherry picked from commit f42d6b7ae6)
SSL_OP_NETSCAPE_CA_DN_BUG became obsolete in 3c33c6f6b1 and
support for SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG was removed by
7a4dadc3a6. The definitions are still listed under "OBSOLETE
OPTIONS retained for compatibility" in ssl.h.in, so this commit adds
them to the list of obsolete options in doc/man3.
Refs: https://github.com/nodejs/node/pull/46954
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20443)
(cherry picked from commit fe52208c56)
In the default setup, using prediction resistance cascades to a reseeding
of all DRBGs. The cost for this will be excessive for highly threaded
applications.
Fixes#20414
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20452)
(cherry picked from commit d90bd3468a)
Clearly document that implicit fetching is slower when using providers,
and explain prefetching. Added to crypto.pod and migration_guide.pod
links to it.
Add a link to EVP_default_properties_enable_fips() in crypto.pod.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20354)
(cherry picked from commit e798248c84)
Also document CMS_decrypt_set1_password() and fix CMS_EnvelopedData_create.pod.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20209)
(cherry picked from commit 26521faae4)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20275)
(cherry picked from commit 9fae775acf)
Document the effect on the internal read buffer when using pipelining.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20208)
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20327)
(cherry picked from commit 7e5505107a)
Also add corresponding tests and to this end update credentials
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20160)
(cherry picked from commit 6b58f498b3)
Add missing `I` to `<b>`
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20169)
(cherry picked from commit 0414899887)
Fixes#20084
In the 3.0 provider implementation the generic code that handles IV's
only allows a 12 byte IV. Older code intentionally added the ability for
the IV to be truncated.
As this truncation is unsafe, the documentation has been updated to
state that this in no longer allowed. The code has been updated to
produce an error when the iv length is set to any value other than 12.
NOTE: It appears that this additional padding may have originated from the code
which uses a 12 byte IV, that is then passed to CHACHA which zero pads it to 16 bytes.
Note that legacy behaviour in e_chacha20_poly1305.c has not been
updated.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20151)
(cherry picked from commit a011523706)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20095)
(cherry picked from commit 61222b95ff)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20052)
(cherry picked from commit ec6cbda0f2)
Clarify behavior of OSSL_CMP_CTX_set_option() when given (negative)
values for OSSL_CMP_OPT_MSG_TIMEOUT or OSSL_CMP_OPT_TOTAL_TIMEOUT.
Fix doc of -msg_timeout and -total_timeout in openssl-cmp.pod.in
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19391)
(cherry picked from commit 5acd4007a0)
Current man page indicates the function returns an int while it returns
a long.
Fixes#20096.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20097)
(cherry picked from commit 2bde260ac0)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20019)
(cherry picked from commit ae61bd34e6)
Fixes#8630
The remaining functions are at least as old as 0.9.8 so it is
not worth documenting this.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19956)
(cherry picked from commit 8d927e55b7)
Fixes#19829
Examples added for setting/getting ECDSA SIG related r and s values
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19936)
(cherry picked from commit c99209264d)
Fixes#19782
Clarify that EVP_Q_MAC() can be used as an alternative that allows
setting of the libctx.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19855)
(cherry picked from commit d1ebd99397)
Do not accept password-based if expected signature-based and no secret is available and
do not accept signature-based if expected password-based and no trust anchors available.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19861)
FIPS 186-4 section 5 "The RSA Digital Signature Algorithm", subsection
5.5 "PKCS #1" says: "For RSASSA-PSS […] the length (in bytes) of the
salt (sLen) shall satisfy 0 <= sLen <= hLen, where hLen is the length of
the hash function output block (in bytes)."
Introduce a new option RSA_PSS_SALTLEN_AUTO_DIGEST_MAX and make it the
default. The new value will behave like RSA_PSS_SALTLEN_AUTO, but will
not use more than the digest length when signing, so that FIPS 186-4 is
not violated. This value has two advantages when compared with
RSA_PSS_SALTLEN_DIGEST: (1) It will continue to do auto-detection when
verifying signatures for maximum compatibility, where
RSA_PSS_SALTLEN_DIGEST would fail for other digest sizes. (2) It will
work for combinations where the maximum salt length is smaller than the
digest size, which typically happens with large digest sizes (e.g.,
SHA-512) and small RSA keys.
J.-S. Coron shows in "Optimal Security Proofs for PSS and Other
Signature Schemes. Advances in Cryptology – Eurocrypt 2002, volume 2332
of Lecture Notes in Computer Science, pp. 272 – 287. Springer Verlag,
2002." that longer salts than the output size of modern hash functions
do not increase security: "For example,for an application in which at
most one billion signatures will be generated, k0 = 30 bits of random
salt are actually sufficient to guarantee the same level of security as
RSA, and taking a larger salt does not increase the security level."
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(cherry picked from commit 6c73ca4a2f)
(Merged from https://github.com/openssl/openssl/pull/19862)
The types OSSL_DISPATCH, OSSL_ITEM, OSSL_ALGORITHM, OSSL_PARAM,
OSSL_CALLBACK, and OSSL_PASSPHRASE_CALLBACK are described in their own
manual page, so we change every mention of them to links to those pages.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19842)
(cherry picked from commit 318a9dfa5f)
This expands on some of the core type descriptions, and also makes it
easier to find the documentation for each type, at least on Unix, with
a simple call like "man OSSL_ALGORITHM".
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19842)
(cherry picked from commit 801e54d65c)
Fixes openssl#19771
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19787)
(cherry picked from commit a63fa5f711)
Fixes GH #19786
Also simplify the CSPRNG must be seeded argument.
Since version 1.1.1, the CSPRNG is seeded automatically on first use,
so it's not the responsibility of the programmer anymore. Still, he
needs to be aware that the seeding might fail.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19789)
(cherry picked from commit 328dc33365)
Fixup for glitch while handling merge conflict in OSSL_CMP_CTX_new.pod
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
(cherry picked from commit a2ede0396a)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
(cherry picked from commit a2ede0396a)
Otherwise, further OSSL_CMP_exec_GENM_ses() calls will go wrong.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
(cherry picked from commit 1c04866c67)
There is no reason preventing this API to support SM2,
which gives us a simple method to do SM2 key gen.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19736)
(cherry picked from commit 3f32d29ad4)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19205)
(cherry picked from commit cba0e2afd6)
On this occasion, replace magic constants by mnemonic ones; update doc
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19205)
(cherry picked from commit 19ddcc4cbb)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18386)
(cherry picked from commit 3b7398843c)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18386)
(cherry picked from commit e8fdb06035)
The rest of the documentation talks about sig, not sigret
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18943)
(cherry picked from commit 2bd8190aac)
FIPS 186-4 has 5 different algorithms for key generation,
and all of them rely on testing GCD(a,n) == 1 many times.
Cachegrind was showing that during a RSA keygen operation,
the function BN_gcd() was taking a considerable percentage
of the total cycles.
The default provider uses multiprime keygen, which seemed to
be much faster. This is because it uses BN_mod_inverse()
instead.
For a 4096 bit key, the entropy of a key that was taking a
long time to generate was recorded and fed back into subsequent
runs. Roughly 40% of the cycle time was BN_gcd() with most of the
remainder in the prime testing. Changing to use the inverse
resulted in the cycle count being 96% in the prime testing.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19578)
(cherry picked from commit dd1d7bcb69)
Allow to specify "z16" as machine generation in environment variable
OPENSSL_s390xcap. It is an alias for "z15".
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18054)
(cherry picked from commit 42f111ad41)
With the OBJ_ thread locking in place, these documentation changes are not
required.
This reverts commit 0218bcdd3f.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15713)
(cherry picked from commit 06394a6cc7)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
i2d_XXX_bio and i2d_XXX_fp return either 0 or 1.
Other i2d_XXX functions return the number of bytes or negative on error.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18427)
(cherry picked from commit 943051d0f9)
The FIPS 140-3 DSA and ECDSA tests need to be known answer tests which means
the entropy needs to be cooked. This permits this.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19486)
I.e., those that can be called with NULL stack parameter or invalid index.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19400)
(cherry picked from commit 0778364f8e)
Also change B< to I< in {CMS,PKCS7}_verify.pod, PKCS7_sign{,_add_signer}.pod
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19108)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19257)
(cherry picked from commit 28a5aa0cbd)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19240)
(cherry picked from commit e9809f8a09)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19239)
(cherry picked from commit 257cade411)
X509_STORE_load_locations_ex() calls X509_STORE_load_file_ex() and X509_STORE_load_path(), there's no such function name as X509_STORE_load_dir().
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19202)
(cherry picked from commit edb271ee5d)
This limit was increased with 20c2876f24 ("Increase
HKDF_MAXBUF from 1024 to 2048").
CLA: trivial
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19085)
(cherry picked from commit d4ffdc42cb)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18929)
(cherry picked from commit 7af110f9f5)
Other very similar functions were documented, but this one was missing.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18974)
(cherry picked from commit 425e972dfa)
Also clarify that EVP_PKEY_fromdata ignores parameters that
are unknown or incorrect for given selection.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18902)
(cherry picked from commit 58135cb3c0)
The documentation was misleading in that it suggests that this environment
variable will record information about all allocations. While this is true
it doesn't record the most useful information that you might expect such
as the requested size of the allocation! It is mainly for use in
conjunction with OPENSSL_MALLOC_FAILURES, and reports information about
what chance an allocation has of failing.
We also clarify that the mem_debug functions are actually no-ops in 3.0.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18967)
(cherry picked from commit 2c35d61790)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18925)
(cherry picked from commit 65b41ab319)
Updates the docs to describe EC_KEY_set_private_key() function behavior
when a NULL priv_key argument is passed.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/18941)
Fixes#18801
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18830)
(cherry picked from commit c00fd2dece)
Updated these to the current documentation style.
Moved X509v3_delete_ext() under BUGS
to NOTES and added information to call free.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18786)
(cherry picked from commit 1711f4824b)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18763)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18674)
(cherry picked from commit 7d5019c15a)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18674)
(cherry picked from commit 35750cb9af)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18087)
(cherry picked from commit a97931955d)
Explicitly state that it is not thread safe.
Fixes#18613
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18678)
(cherry picked from commit 5c535e4692)
Fix the documentation.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18599)
(cherry picked from commit d842b6eff0)
Fixes#18342
Fixes <propq> to I<propq>
Updated copyright year
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18623)
(cherry picked from commit 9454423bf1)
Commit 8bfb7506d2 updated
`BIO_f_base64(3)` to improve the documentation of the
`BIO_FLAGS_BASE64_NO_NL` flag. In particular, the updated text
states that when this flag is used, all newlines in the input are
ignored. This is incorrect, as the following program proves:
```c
unsigned char *in_buf =
"IlRoZSBxdWljayBicm93biBmb3gganVt\ncHMgb3ZlciBhIGxhenkgZG9nLiI=\n";
int main(int argc, char **argv) {
BIO *b64 = BIO_new(BIO_f_base64());
if (b64 == NULL) return 1;
BIO_set_flags(b64, BIO_get_flags(b64) | BIO_FLAGS_BASE64_NO_NL);
int in_len = strlen(in_buf);
BIO *in = BIO_new_mem_buf(in_buf, in_len);
if (in == NULL) return 2;
in = BIO_push(b64, in);
unsigned char *out_buf = calloc(in_len, sizeof(unsigned char));
if (out_buf == NULL) return 3;
size_t out_len;
int r = BIO_read_ex(in, out_buf, in_len, &out_len);
printf("rv = %d\n", r);
printf("decoded = %s\n", out_buf);
return 0;
}
```
Update the text of `BIO_f_base64(3)` to clarify that when the flag
is set, the data must be all on one line (with or without a trailing
newline character).
Signed-off-by: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18568)
(cherry picked from commit 0edcbacca9)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18490)
(cherry picked from commit 809526a06c)
The example code in EVP_PKEY_decrypt(3) and EVP_PKEY_encrypt(3) and uses
a nonexistent padding mode `RSA_OAEP_PADDING`, which should be
`RSA_PKCS1_OAEP_PADDING` instead.
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18255)
(cherry picked from commit ecb1ed1b0e)
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18253)
(cherry picked from commit be92036b34)
EVP_PKEY_XXX_check() calls for the default and fips providers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18235)
(cherry picked from commit 0b3d2594d0)
Currently we do not have any way to retrieve these values once set.
Fixes#18035.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18038)
(cherry picked from commit 948cf52179)
Refer to OSSL_ENCODER_to_bio and OSSL_DECODER_from_bio man pages.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18164)
(cherry picked from commit 7510aee28a)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/17983)
(cherry picked from commit dedb192775)
For TLSv1.3, limit ticket lifetime hint to 1 week per RFC8446
Fixes#17948
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17952)
(cherry picked from commit 0089cc7f9d)
This is as I understand these functions from reading the code.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17815)
(cherry picked from commit 2a92195142)
Provide a different mechanism to indicate that the application wants
to retry the verification. The negative result of the callback function
now indicates an error again.
Instead the SSL_set_retry_verify() can be called from the callback
to indicate that the handshake should be suspended.
Fixes#17568
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17825)
(cherry picked from commit dfb39f7313)
Also update and complete related documentation.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17726)
(cherry picked from commit c8c923454b)
This option is no longer set by default from OpenSSL 3.0.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/17748)
(cherry picked from commit 3d4dd8f272)
Because no supported flag affects the behavior of X509_check_ip, the
flags argument currently has no effect.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17536)
(cherry picked from commit 2d280fe016)
The `func` parameter was incorrect. It was documented as `const char *func`
instead of `const char **func`.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17522)
(cherry picked from commit f242ce9817)
Watson Ladd
Dr. David von Oheimb
Dimitri Papadopoulos
Vladimir Kotal
Jeeban Sethi
Samuel Lee (ENS/CRYPTO)
Tomas Mraz
Michael Baentsch
FdaSilvaYY
Tobias Nießen
Pauli
Matt Caswell
slontis
Benno Evers
Andrea Pappacoda
Thib
north-16
Dmitry Belyavskiy
Nobuhiro IMAI
Nikhil Bisht
Hugo Landau
Peiwei Hu
Clemens Lang
Richard Levitte
Daniel Fiala
Reinhard Urban
Marco Abbadini
Jiaxun Yang
Kurt Roeckx
Juergen Christ
Joachim Vandersmissen
Dimitris Apostolou
Joakim Antman
Todd Short
olszomal
Akshat Maheshwari
Tobias Brunner
Roberto Hueso Gomez
Allan
EasySec
Fraser Tweedale
Thomas Bellebaum
Dimitry Andric
Ahmed JELIJLI
Jan Engelhardt
Arran Cudbard-Bell
Todd Short
Carlo Teubner
Thomas1664
Kevin Jones