Run-checker merge / run-checker (enable-weak-ssl-ciphers) (push) Waiting to runDetails
Run-checker merge / run-checker (enable-zlib) (push) Waiting to runDetails
Run-checker merge / run-checker (no-ct) (push) Waiting to runDetails
Run-checker merge / run-checker (no-dso) (push) Waiting to runDetails
Run-checker merge / run-checker (no-dynamic-engine) (push) Waiting to runDetails
Run-checker merge / run-checker (no-ec2m) (push) Waiting to runDetails
Run-checker merge / run-checker (no-engine no-shared) (push) Waiting to runDetails
Run-checker merge / run-checker (no-err) (push) Waiting to runDetails
Run-checker merge / run-checker (no-filenames) (push) Waiting to runDetails
Run-checker merge / run-checker (no-module) (push) Waiting to runDetails
Run-checker merge / run-checker (no-ocsp) (push) Waiting to runDetails
Run-checker merge / run-checker (no-pinshared) (push) Waiting to runDetails
Run-checker merge / run-checker (no-srp) (push) Waiting to runDetails
Run-checker merge / run-checker (no-srtp) (push) Waiting to runDetails
Run-checker merge / run-checker (no-ts) (push) Waiting to runDetails
Run-checker merge / threads_sanitizer_atomic_fallback (push) Waiting to runDetails
Windows GitHub CI / shared (map[arch:win32 config:--strict-warnings no-fips os:windows-2025]) (push) Waiting to runDetails
Windows GitHub CI / shared (map[arch:win64 config:enable-fips no-thread-pool no-quic os:windows-2025]) (push) Waiting to runDetails
Windows GitHub CI / shared (map[arch:win64 config:enable-fips os:windows-2022]) (push) Waiting to runDetails
Windows GitHub CI / plain (windows-2022) (push) Waiting to runDetails
Windows GitHub CI / minimal (windows-2022) (push) Waiting to runDetails
Windows GitHub CI / cygwin (windows-2022, map[arch:win64 config:-DCMAKE_C_COMPILER=gcc --strict-warnings no-fips]) (push) Waiting to runDetails
IO::Socket::IP is an optionally used package in our perl scripts, and a
recent change of mine used it unilaterally, causing breakage on older
perl installations. Fix it up to use it optionally again, falling back
to IO::Socket::INET when needed.
Fixes#27940
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/27941)
(cherry picked from commit b321bf25c8)
Apparently IO::Socket::IP has several odd behaviors on windows 2025,
notably indicating that AF_INET6 isn't a supported family when it
clearly is.
Follow the pattern in determinig the haveIPV6 variable in Proxy.pm, and
record if we determine IPv6 availablity with the IP class or the INET6
class and use the same method when testing port binding
Fixes project/#1213
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/27780)
(cherry picked from commit ae404a9b3b)
Run-checker merge / run-checker (enable-weak-ssl-ciphers) (push) Waiting to runDetails
Run-checker merge / run-checker (enable-zlib) (push) Waiting to runDetails
Run-checker merge / run-checker (no-ct) (push) Waiting to runDetails
Run-checker merge / run-checker (no-dso) (push) Waiting to runDetails
Run-checker merge / run-checker (no-dynamic-engine) (push) Waiting to runDetails
Run-checker merge / run-checker (no-ec2m) (push) Waiting to runDetails
Run-checker merge / run-checker (no-engine no-shared) (push) Waiting to runDetails
Run-checker merge / run-checker (no-err) (push) Waiting to runDetails
Run-checker merge / run-checker (no-filenames) (push) Waiting to runDetails
Run-checker merge / run-checker (no-module) (push) Waiting to runDetails
Run-checker merge / run-checker (no-ocsp) (push) Waiting to runDetails
Run-checker merge / run-checker (no-pinshared) (push) Waiting to runDetails
Run-checker merge / run-checker (no-srp) (push) Waiting to runDetails
Run-checker merge / run-checker (no-srtp) (push) Waiting to runDetails
Run-checker merge / run-checker (no-ts) (push) Waiting to runDetails
Run-checker merge / threads_sanitizer_atomic_fallback (push) Waiting to runDetails
Windows GitHub CI / shared (map[arch:win32 config:--strict-warnings no-fips os:windows-2025]) (push) Waiting to runDetails
Windows GitHub CI / shared (map[arch:win64 config:enable-fips no-thread-pool no-quic os:windows-2025]) (push) Waiting to runDetails
Windows GitHub CI / shared (map[arch:win64 config:enable-fips os:windows-2022]) (push) Waiting to runDetails
Windows GitHub CI / plain (windows-2022) (push) Waiting to runDetails
Windows GitHub CI / minimal (windows-2022) (push) Waiting to runDetails
Windows GitHub CI / cygwin (windows-2022, map[arch:win64 config:-DCMAKE_C_COMPILER=gcc --strict-warnings no-fips]) (push) Waiting to runDetails
Encountered this error in a pr today:
https://github.com/openssl/openssl/actions/runs/15418713146/job/43387767612
===
Proxy started on port [::1]:56662
Engine "ossltest" set.
Using default temp DH parameters
ACCEPT [::1]:59189
Server responds on [::1]:59189
Engine "ossltest" set.
C0774F02907F0000:error:80000062:system library:BIO_bind:Address already in use:crypto/bio/bio_sock2.c:240:calling bind()
C0774F02907F0000:error:10000075:BIO routines:BIO_bind:unable to bind socket:crypto/bio/bio_sock2.c:242:
connect:errno=98
===
Its occuring because we randomly select a port to use for our client
connection in the sslrecords test. Thats usually fine, but sometimes,
we get unlucky and pick a port thats already in use. This presents as
random failures in our CI on this test.
So lets try harden ourselves against it. When creating the client
connection, test the randomly selected port by trying to bind to it via
a call to IO::Socket::IP->new(). If that fails, try a different port
number, until we get one that works. If it works, use that port in the
assignment for the clients local port value.
Reviewed-by: Saša Nedvědický <sashan@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/27752)
(cherry picked from commit f78f824c8e)
This drops OSSL_PKEY_PARAM_IMPLICIT_REJECTION - which is a meaningless
name - everywhere apart from still existing (for API stability, in
case someone uses that macro).
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26421)
(cherry picked from commit 1df07c761b)
call to die() in perl templates is currently ignored.
any error printed by die() commad appears in template
output.
In order to make sure die() terminates processing we
must ensure we emite `undef` value. This is ensured
by adding a `BROKEN` callback to `fill_in()` Template
method. The callback must return undef to stop processing.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26064)
(cherry picked from commit 578760bb6a)
It's possible to disable IPv6 explicitly when configuring OpenSSL. In that
case, IPv6 related tests should be skipped.
This is solved by having OpenSSL::Test::Utils::have_IPv6() check configuration
first, before trying to determine if the machine supports IPv6.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24748)
(cherry picked from commit 5a9c90b1e5)
It is valid according to the spec for a NextProto message to have no
protocols listed in it. The OpenSSL implementation however does not allow
us to create such a message. In order to check that we work as expected
when communicating with a client that does generate such messages we have
to use a TLSProxy test.
Follow on from CVE-2024-5535
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24717)
times.
Fixes#23672
There are many name/value pairs currently that have duplicate names e.g.
'CAPABILITY_TLS_GROUP_MAX_TLS' => "tls-max-tls",
'CAPABILITY_TLS_SIGALG_MAX_TLS' => "tls-max-tls",
Stripping the .pm file down to just the above entries and running
multiple times gives different results for the produce_decoder.
On multiple runs any iterations over the unordered hash table keys using
foreach my $name (keys %params) results in a different order on multiple
runs. Because of this the mapping from the hash 'value' back to the
'key' will be different.
Note that the code also uses another mechanism in places that uses
"name1" => "value"
"name2" => "*name1"
Rather than fix all the strings the change done was to sort the keys. If
we were to chose to fix the strings then the perl code should be changed
to detect duplicates.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/23688)
(cherry picked from commit 5df34ca70a)
HPE has a weird preference to prefix letters and zero-padding. Properly trim
them before processing.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22891)
(cherry picked from commit 253c5667a9)
VSI C on OpenVMS for x86_64 has a bit more information than on other
hardware. This is no doubt because it's based on LLVM which leaves an
opening for cross compilation.
VSI C on Itanium:
$ CC/VERSION
VSI C V7.4-001 on OpenVMS IA64 V8.4-2L3
VSI C on x86_64:
$ CC/VERSION
VSI C x86-64 X7.4-843 (GEM 50XB9) on OpenVMS x86_64 V9.2-1
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22792)
(cherry picked from commit df5e72d220)
Rather than instantiate the private and primary DRBGs during the
selftest, instead use a test RNG. This leaves the DRBG setup
pristine and permits later replacement of the seed source despite
the very early running power up self tests.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
This also upgrades flags similarly to the Linux configuration.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20896)
Now the default is linux-generic32, it's not good for loongarch64.
We can also test if the assembler supports vector instructions here and
disable asm if not.
Closes#21340.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21510)
Constructions like $$cursor{whatever} and %$cursor{whatever} were ambiguous
in some perl versions, and it's still better to use the arrow syntax for the
way we use them, i.e. they can both be replaced with $cursor->{whatever}.
Fixes#21152Fixes#21172
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21178)
The separate file is a Perl script that generates the appropriate define
directives for inclusion in core_names.h. By having this separation it
will be possible to prebuild data structures to give faster access when
looking up parameters by name.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20935)
A native x86_64 C compiler has appeared.
We preserve the previous config target with a new name to indicate that it's
for cross compilation, at least for the time being.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20983)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
The mechanism was pretty tentative and wasn't well tested for diverse
situations.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20415)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20201)
to avoid inheriting Linux's linker flags (ie -Wl,-z,defs)
now targetting OpenBSD.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13393)
When header files happen to have \r\n at line end, prevent hick-ups like:
Unmatched parentheses at include/openssl/asn1.h line 520
make[1]: *** [Makefile:4757: util/libcrypto.num] Error 255
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:3387: build_sw] Error 2
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19686)
The MACHINE value from POSIX::uname() isn't trustworthy at all.
MACHINE names like this has been seen:
_HP__VMM___(1.67GHz/9.0MB)
Perl's `$Config{archname}` is much more trustworthy, especially since
VMS isn't a multiarch operating system, at least yet.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19285)
Since cl knows what architecture it builds fore, all depending on what
the user set up, it makes sense to ask it, and use that result primarly,
and only use the POSIX::uname() MACHINE value as a fallback.
Also, this does indeed determine if cl is present or not.
We drop the explicit names in .github/workflows/windows.yml as proof
of concept.
Fixes#19281
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19285)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18910)
macOS Catalina (10.15) no longer supports 32-bit applications.
Do not wait 5 seconds to give the user the option of using KERNEL_BITS=32
Do not accept the KERNEL_BITS=32 option
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17675)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17306)
OpenSSL assumes AT_HWCAP = 16 (as on Linux), but on FreeBSD AT_HWCAP = 25
Switch to using AT_HWCAP, and setting it to 16 if it is not defined.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17090)
This function tried to shave off the pre-release and build metadata
text from the the version number it gets, but didn't do that quite
right. Since this isn't even a documented behaviour, the easier, and
arguably more correct path is for that function not to try to shave
off anything, and for the callers to feed it the short version number,
"{MAJOR}.{MINOR}.{PATCH}", nothing more.
The build file templates are adjusted accordingly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16556)
This affects bldtop_dir, bldtop_file, srctop_dir, srctop_file,
data_dir, data_file, result_dir, and result_file. They are all
enhanced to check that the resulting path really is a directory or a
file. They only do this if the path exists.
This allows the tests to catch if these functions are used
incorrectly, even on systems where the syntax for directories and
files is the same.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16523)
Looks more like manpage format. :)
Also remove `{{..}}` notation and rewrite around it.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16329)
And document the -w option
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16325)
Avoid perl "undefined variable in regexp" message.
Not all uses were changed because I wasn't sure.
Add support for CONFIG_NOWAIT environment variable.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16325)
Missing '(' added into a PowerPC-specific command
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15911)
! is the DCL character that starts a comment, and therefore acts as a
cut-off if not quoted.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15889)
The command line quotifier is more useful as a common utility, so it
gets moved to OpenSSL::Util, as the following two functions:
fixup_cmd_elements(), which is the generic command line reformatter
fixup_cmd(), which is like fixup_cmd_elements(), but treats the first
element specially where necessary (such as on VMS).
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15791)
Neil Horman
openssl-machine
Richard Levitte
Alexandr Nedvedicky
Tomas Mraz
Matt Caswell
slontis
Michael Osipov
Pauli
Samuel Thibault
Xi Ruoyao
Todd Short
Viktor Dukhovni
David Carlier
Dr. David von Oheimb
Piotr Kubaj
Hugo Landau
Bernd Edlinger
Allan Jude
Rich Salz
Beat Bolli
Lőrinczy, Zsigmond