We modify libssl to use explicitly fetched ciphers, digests and other
algorithms as required based on the configured library context and
property query string for the SSL_CTX that is being used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10854)
It is better, safer and smaller to let the library routine handle the
strlen(3) call.
Added a note to the documentation suggesting this.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11019)
- Check for the <sys/ktls.h> header to determine if KTLS support
is available.
- Populate a tls_enable structure with session key material for
supported algorithms. At present, AES-GCM128/256 and AES-CBC128/256
with SHA1 and SHA2-256 HMACs are supported. For AES-CBC, only MtE
is supported.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10045)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9010)
With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.
This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)
This patch adds support for the Linux TLS Rx socket option.
It completes the previous patch for TLS Tx offload.
If the socket option is successful, then the receive data-path of the TCP
socket is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Change-Id: I59741e04d89dddca7fb138e88fffcc1259b30132
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
This patch adds support for the Linux TLS Tx socket option.
If the socket option is successful, then the data-path of the TCP socket
is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)
A missing SSLfatal call can result in an assertion failed error if the
condition gets triggered.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7594)
If we sent early_data and then received back an HRR, the enc_write_ctx
was stale resulting in errors if an alert needed to be sent.
Thanks to Quarkslab for reporting this.
In any case it makes little sense to encrypt alerts using the
client_early_traffic_secret, so we add special handling for alerts sent
after early_data. All such alerts are sent in plaintext.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
We should use the old EVP_PKEY_new_mac_key() instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5808)
Since the public and private DRBG are per thread we don't need one
per ssl object anymore. It could also try to get entropy from a DRBG
that's really from an other thread because the SSL object moved to an
other thread.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5547)
Renamed to EVP_PKEY_new_raw_private_key()/EVP_new_raw_public_key() as per
feedback.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
This trace option does not appear in Configure as a separate option and is
undocumented. It can be switched on using "-DOPENSSL_SSL_TRACE_CRYPTO",
however this does not compile in master or in any 1.1.0 released version.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3408)
In 1.1.0 changing the ciphersuite during a renegotiation can result in
a crash leading to a DoS attack. In master this does not occur with TLS
(instead you get an internal error, which is still wrong but not a security
issue) - but the problem still exists in the DTLS code.
The problem is caused by changing the flag indicating whether to use ETM
or not immediately on negotiation of ETM, rather than at CCS. Therefore,
during a renegotiation, if the ETM state is changing (usually due to a
change of ciphersuite), then an error/crash will occur.
Due to the fact that there are separate CCS messages for read and write
we actually now need two flags to determine whether to use ETM or not.
CVE-2017-3733
Reviewed-by: Richard Levitte <levitte@openssl.org>
Commit 94ed2c6 dropped a ! operator by mistake, which causes extended
master secret connections to fail. This puts in back.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The previous commits put in place the logic to exchange key_share data. We
now need to do something with that information. In <= TLSv1.2 the equivalent
of the key_share extension is the ServerKeyExchange and ClientKeyExchange
messages. With key_share those two messages are no longer necessary.
The commit removes the SKE and CKE messages from the TLSv1.3 state machine.
TLSv1.3 is completely different to TLSv1.2 in the messages that it sends
and the transitions that are allowed. Therefore, rather than extend the
existing <=TLS1.2 state transition functions, we create a whole new set for
TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time
they will be amended.
The new TLSv1.3 transitions remove SKE and CKE completely. There's also some
cleanup for some stuff which is not relevant to TLSv1.3 and is easy to
remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN.
I also disable EXTMS for TLSv1.3. Using it was causing some added
complexity, so rather than fix it I removed it, since eventually it will not
be needed anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Run util/openssl-format-source on ssl/
Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
With read pipelining we use multiple SSL3_RECORD structures for reading.
There are SSL_MAX_PIPELINES (32) of them defined (typically not all of these
would be used). Each one has a 16k compression buffer allocated! This
results in a significant amount of memory being consumed which, most of the
time, is not needed. This change swaps the allocation of the compression
buffer to be lazy so that it is only done immediately before it is actually
used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
1) Simplify code with better PACKET methods.
2) Make broken SNI parsing explicit. SNI was intended to be extensible
to new name types but RFC 4366 defined the syntax inextensibly, and
OpenSSL has never parsed SNI in a way that would allow adding a new name
type. RFC 6066 fixed the definition but due to broken implementations
being widespread, it appears impossible to ever extend SNI.
3) Annotate resumption behaviour. OpenSSL doesn't currently handle all
extensions correctly upon resumption. Annotate for further clean-up.
4) Send an alert on ALPN protocol mismatch.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Removing code, where memory was getting allocated for an unused variable
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
- Make use of the functions given through CRYPTO_set_mem_functions().
- CRYPTO_free(), CRYPTO_clear_free() and CRYPTO_secure_free() now receive
__FILE__ and __LINE__.
- The API for CRYPTO_set_mem_functions() and CRYPTO_get_mem_functions()
is slightly changed, the implementation for free() now takes a couple
of extra arguments, taking __FILE__ and __LINE__.
- The CRYPTO_ memory functions will *always* receive __FILE__ and __LINE__
from the corresponding OPENSSL_ macros, regardless of if crypto-mdebug
has been enabled or not. The reason is that if someone swaps out the
malloc(), realloc() and free() implementations, we can't know if they
will use them or not.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Change handshake hash array into a single digest context simplifying the
handhake hash code. Use EVP_md5_sha1() if needed for handshake hashes in
TLS 1.1 and earlier.
Simplify PRF code to also use a single digest and treat EVP_md5_sha1()
as a special case.
Modify algorithm2 field of ciphers to use a single index value for handshake
hash and PRF instead of a bitmap.
Reviewed-by: Matt Caswell <matt@openssl.org>
There are lots of calls to EVP functions from within libssl There were
various places where we should probably check the return value but don't.
This adds these checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rewrite ssl3_digest_cached_records handling. Only digest cached records
if digest array is NULL: this means it is safe to call
ssl3_digest_cached_records multiple times (subsequent calls are no op).
Remove flag TLS1_FLAGS_KEEP_HANDSHAKE instead only update handshake buffer
if digest array is NULL.
Add additional "keep" parameter to ssl3_digest_cached_records to indicate
if the handshake buffer should be retained after digesting cached records
(needed for TLS 1.2 client authentication).
Reviewed-by: Matt Caswell <matt@openssl.org>
Where we called openssl_cleanse, make sure we do it on all error
paths. Be consistent in use of sizeof(foo) when possible.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove RFC2712 Kerberos support from libssl. This code and the associated
standard is no longer considered fit-for-purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't check for NULL before calling free functions. This gets:
ERR_STATE_free
ENGINE_free
DSO_free
CMAC_CTX_free
COMP_CTX_free
CONF_free
NCONF_free NCONF_free_data _CONF_free_data
A sk_free use within OBJ_sigid_free
TS_TST_INFO_free (rest of TS_ API was okay)
Doc update for UI_free (all uses were fine)
X509V3_conf_free
X509V3_section_free
X509V3_string_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add OPENSSL_clear_free which merges cleanse and free.
(Names was picked to be similar to BN_clear_free, etc.)
Removed OPENSSL_freeFunc macro.
Fixed the small simple ones that are left:
CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked
Reviewed-by: Richard Levitte <levitte@openssl.org>
In DTLS, immediately prior to epoch change, the write_sequence is supposed
to be stored in s->d1->last_write_sequence. The write_sequence is then reset
back to 00000000. In the event of retransmits of records from the previous
epoch, the last_write_sequence is restored. This commit fixes a bug in
DTLS1.2 where the write_sequence was being reset before last_write_sequence
was saved, and therefore retransmits are sent with incorrect sequence
numbers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Ensure that all functions have their return values checked where
appropriate. This covers all functions defined and called from within
libssl.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function tls1_PRF counts the number of digests in use and partitions
security evenly between them. There always needs to be at least one digest
in use, otherwise this is an internal error. Add a sanity check for this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
I left many "#if 0" lines, usually because I thought we would
probably want to revisit them later, or because they provided
some useful internal documentation tips.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Update master secret calculation to support extended master secret.
TLS 1.2 client authentication adds a complication because we need to
cache the handshake messages. This is simpllified however because
the point at which the handshake hashes are calculated for extended
master secret is identical to that required for TLS 1.2 client
authentication (immediately after client key exchange which is also
immediately before certificate verify).
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Retrieve handshake hashes in a separate function. This tidies the existing
code and will be used for extended master secret generation.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
An expired IETF Internet-Draft (seven years old) that nobody
implements, and probably just as good as NSA DRBG work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Matt Caswell
Pauli
Veres Lajos
John Baldwin
Andrew Gallatin
Dr. Matthias St. Pierre
David Makepeace
Todd Short
Boris Pismenny
Richard Levitte
Dmitry Belyavskiy
Kurt Roeckx
Bernd Edlinger
FdaSilvaYY
KaoruToda
Alexey Komnin
Rich Salz
Dr. Stephen Henson
Emilia Kasper
klemens
J Mohan Rao Arisankala
Rich Salz
Viktor Dukhovni
Eric Dequin