Fix the "test 2" case of test_quic_write_read(). It is intended to be run
in blocking mode.
The result of a bad interaction between #21087 and #21332
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21409)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21116)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
We return SSL_ERROR_SYSCALL when network error is encountered.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
The test assumes certain options are on/off. DH must be on for this test.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21373)
no-ecx causes SSL_trace to give different output. The test compares
the output to a reference sample - so we disable it in the case of no-ecx.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21372)
In the case of no-ecx test 3 in test_tls13hrr was failing because it was
setting the server side support groups to on P-256 in order to induce an
HRR. However with no-ecx the client insteads issues an initial key share
using P-256 anyway and so an HRR is not used. We swap to use P-384 instead.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21372)
We then use it in test_corrupted_data() to remove an OSSL_sleep() which
may fail in some builds.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21332)
Various options disturb the output expected from the ssl trace test, so we
skip it if necessary.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21332)
Some compilers don't like %lx
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21332)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Otherwise this testcase won't work with no-ecx.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21333)
If we have TX allowance then there is no need to wait if we have something
to send - the wake up deadline is immediate.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21204)
This QUIC server utility is intended for test purposes only and is expected
to be replaced in a future version of OpenSSL by s_server. At that point
it will be removed.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21204)
This is defined in NIST SP 800-208 as the truncation to 192 bits of
SHA256. Unlike other truncated hashes in the SHA2 suite, this variant
doesn't have a different initial state, it is just a pure truncation
of the output.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21180)
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21274)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21272)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21197)
Test that if the client sends a key share for a group in the server's
supported_group list but is otherwise invalid, that we don't select it
in the HRR.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21163)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
This is needed to support key update validation on the receive side.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Typos in doc/man* will be fixed in a different commit.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20910)
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21194)
Also use OSSL_NELEM instead of hardcoding array size.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21183)
This can effectively reduce the binary size for platforms
that don't need ECX feature(~100KB).
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20781)
1. Update cmac test cases, fullfilling test data by short string
instead of using long string directly.
2. Modify the wording of comments in cmac.c
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21177)
1. Update manual, add SM4-CBC to CMAC cipher algorithm list.
2. Add test case for SM4-CBC CMAC, add "data length is greater
than 4 block-length" cases for aes-128-cbc, aes-192-cbc,
aes-256-cbc and des-ede3-cbc.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21102)
Concatenation tests are provider version specific, limit them to supporting
versions.
Fixes#21134
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21140)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20866)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19231)
This fuzzer can find CVE-2022-4450
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20242)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
We create setter functions for the msg_callback and msg_callback_arg so
that these values can be properly propagated to the QRX/QTX/TXP even
after the channel has been created.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
Fixes nondeterministic failures where BIO_bind would fail on some
platforms.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20856)
Alsoo rename OPK_C_ACCEPT_STREAM to reflect its current behaviour.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20856)
Just like --help is explicitly supported, we should support --version.
This will greatly ease people adopting openssl.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20936)
seq_id must be >= retire_prior_to.
Add negative testcase.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20892)
This is an alternative to #20893
Additionally this fixes also a possible issue in UI_UTIL_read_pw:
When UI_new returns NULL, the result code would still be zero
as if UI_UTIL_read_pw succeeded, but the password buffer is left
uninitialized, with subsequent possible stack corruption or worse.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20957)
We need to get acknowledgement notifications for our STOP_SENDING and
STREAM_RESET frames as this information is needed to know when we can
delete a QUIC_STREAM object.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
Also use accept queue popping by the application as the retirement
event, i.e., as the cue to increase the limit.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
Though the RXFC was designed for stream flow control, its logic
is generic enough to use to control MAX_STREAMS generation.
Control of when _we_ can open streams is already done in a bespoke
fashion and doesn't use a TXFC, however (see
ossl_quic_stream_map_update_state).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20832)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20832)
Fixes#20889
There was an incorrect value passed to EC_POINT_point2oct() for the
buffer size of the param passed-in.
Added testcases.
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20890)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20848)
Fix a typo that is confusing for newcomers.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20909)
Added coverage test that failed without the change.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19677)
Add more test cases and ensure we test DTLS and QUIC too
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20830)
Signed-off-by: Liu-ErMeng <liuermeng2@huawei.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20797)
The logic for handling inconsistent use of -rspin etc., -port, -server,
and -use_mock_srv options proved faulty. This is fixed here, updating and
correcting also the documentation and diagnostics of the involved options.
In particular, the case that -rspin (or -rspout. reqin, -reqout) does not
provide enough message file names was not properly described and handled.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20295)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Add a new option to the `test' section of SSL test data structure.
This contains a space separated list of version checks, all of which must
pass.
Note that the version checks are as they as because:
- 3.1.0 doesn't have mandatory EMS support, so it can run the old tests.
- 3.1.1 (& later) will have mandatory EMS support, so they can't run them.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
The SSL API tests copies fipsmodule.cnf and modifies it. Unfortunately, it
grabbed the wrong instance of this file.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Fixes#20710
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20745)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20298)
This keeps the interface consistent with other HPKE API's.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20583)
Improves consistency with the QUIC rstream implementation - and improves
the abstraction between the TLS implementation and the abstract record
layer. We should not expect that the TLS implementation should be able to
change the underlying buffer. Future record layers may not expect that.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20404)
We also test SSL_is_dtls(), SSL_is_tls() and SSL_is_quic().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20650)
Discovered during coverage testing.
Remove unneccesary check when using ossl_dh_get0_params() and
ossl_dsa_get0_params(). These point to addresses and can not fail
for any existing calls.
Make dsa keygen tests only available in the FIPS module - as they are
not used in the default provider.
Change ossl_ffc_set_digest() to return void as it cannot fail.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20359)
Related to #20268
DSA_sign() assumes that the signature passed in is related to DSA_size().
If q is negative then DSA_size() actually fails and returns 0.
A test that tries to allocate the signature buffer using DSA_size() and then
pass it to DSA_sign() will then either.
(1) Have a signature buffer of NULL. In this case it was leaking data
returned via i2d_DSA_SIG.
(2) Cause a seg fault because we created a buffer that was not large
enough to hold the signature. As it already checked zero we also now
check for negative values also.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20553)
Similiar to the issue found in PR #20553 for DSA_sign().
ECDSA_sign() leaked memory if the signature was NULL
when i2d_ECDSA_SIG was called.
Note that this does not affect the higher level EVP
functions as they correctly handle NULL.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20554)
We had a test for a handshake record appearing before epoch change, and
a test for an app data record appearing before Finished - but not one for
the app data record appearing before epoch change.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20628)
Verify that the option produces the correct output in the FIPS configuration
file and that the default is as expected.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20521)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
Test that a valid certificate policy is accepted and that an invalid
certificate policy is rejected. Specifically we are checking that a
leaf certificate with an invalid policy is detected.
Related-to: CVE-2023-0465
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20585)
Matt Caswell
Rajeev Ranjan
Tomas Mraz
Hugo Landau
Pauli
Fergus Dall
Richard Levitte
Kurt Roeckx
Dimitri Papadopoulos
Michael Baentsch
Yi Li
fisher.yu
Alex Bozarth
Vladimír Kotal
Jairus Christensen
Dr. David von Oheimb
Marc Brooks
Bernd Edlinger
Watson Ladd
slontis
Alois Klink
Mathias Berchtold
Liu-ErMeng
Irak Rigia
Danny Carpenter
Todd Short