There is only one operating mode supported for each of RSA, EC and ECX.
We should not require an explicit setting for the obvious default.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/26872)
Support EVP_SKEY object for the `enc` command.
Support EVP_SKEYMGMT for the `list` command.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26753)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26715)
- When used as KEMs in TLS the ECDHE algorithms are NOT subjected to
HPKE Extract/Expand key derivation. Instead the TLS HKDF is used
as usual.
- Consequently these KEMs are just the usual ECDHE key exchange
operations, be it with the encap ECDH private key unavoidably
ephemeral.
- A new "MLX" KEM provider is added that supports four hybrids of EC/ECX
DH with ML-KEM:
* ML-KEM-768 + X25519
* ML-KEM-1024 + X448
* P-256 + ML-KEM-768
* P-384 + ML-KEM-1024
- Support listing of implemented TLS groups.
The SSL_CTX_get0_implemented_groups() function and new
`openssl list -tls-groups` and `openssl list -all-tls-groups`
commands make it possible to determine which groups are
implemented by the SSL library for a particular TLS version
or range of versions matching an SSL_CTX.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26220)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26217)
- add testcase for central keygen
- add documentation
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25132)
OpenSSL currently does not support encryption with originator flag so it
should fail nicely instead of segfaulting.
Reviewed-by: Hugo Landau <hlandau@devever.net>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26014)
Previously there was no way to create a CMS SignedData signature without a
signing time attribute, because CMS_SignerInfo_sign added it unconditionally.
However, there is a use case (PAdES signatures) where this attribute is not
allowed, so this commit introduces a new flag to the CMS API that causes this
attribute to be omitted at signing time.
Also add -no_signing_time option to cms command.
Fixes#15777
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15783)
With b911fef216, there is no longer a
default xoflen for shake algorithms. Update the manual to reflect this.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26129)
We should not have an example showing the default_md as md5.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25856)
Update `CHANGES.md` and `NEWS.md`; remove `no-des` guard from req, cms,
and smime apps
Update MAN pages for default cipher; fix styling by removing braces around single statements
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25839)
Original documented sample command causes error. PEM recipient cert argument needs to go last.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25829)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25712)
This information is already present as an 'openssl version' item.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25694)
Fixes#23400
The 3.1 FIPS provider no longer writes out the 'status indicator' by
default due to changes related to FIPS 140-3 requirements. For Backwards
compatability if the fipsinstall detects it is loading a 3.0.X FIPS
provider then it will save the 'status indicator' by default.
Disclaimer: Using a fipsinstall command line utility that is not supplied
with the FIPS provider tarball source is not recommended.
This PR deliberately does not attempt to exclude any additional options
that were added after 3.0.X. These additional options will be ignored by older
providers.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Hugo Landau <hlandau@devever.net>
(Merged from https://github.com/openssl/openssl/pull/23689)
Fixes#25603
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25608)
Similar to other KDFs, the input key should be 112 bits long.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25529)
Document new command line options added in 3.4.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Document new command line options added in 3.2.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Document new command line options added in 3.1.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Documents when the command was added.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
This would be useful when testing with browsers / downloaders which
support 0-RTT only through HTTP.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16055)
Fixes#8018
Documented the potential issue of premature connection closure in
non-interactive environments, such as cron jobs, when using `s_client`.
Added guidance on using the `-ign_eof` option and input redirection to
ensure proper handling of `stdin` and completion of TLS session data exchange.
Highlight potential issues with the `-ign_eof` flag and provide solutions for
graceful disconnection in SMTP and HTTP/1.1 scenarios to avoid indefinite hangs.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25311)
CLA:trivial
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25338)
This adds a FIPS indicator for KMAC key size.
Note that 112 bits keys are still smaller than the
sizes required to reach 128 bits for KMAC128 and
256 bits for KMAC256
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25049)
HMAC has been changed to use a FIPS indicator for its key check.
HKDF and Single Step use a salt rather than a key when using HMAC,
so we need a mechanism to bypass this check in HMAC.
A seperate 'internal' query table has been added to the FIPS provider
for MACS. Giving HMAC a seprate dispatch table allows KDF's to ignore
the key check. If a KDF requires the key check then it must do the
check itself. The normal MAC dipatch table is used if the user fetches
HMAC directly.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25049)
Viktor Dukhovni
Dmitry Belyavskiy
slontis
Rajeev Ranjan
Job Snijders
Jakub Zelenka
Dr. David von Oheimb
Peter Juhasz
Ryan Farley
Matt Caswell
Aditya
Zheyu Shen
Tomas Mraz
Richard Levitte
Dimitri John Ledkov
Daiki Ueno
erbsland-dev
Pablo Rodríguez