Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/27885)
This loads a XDR encoded LMS public key.
It adds a simple LMS keymanager to import this key.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/27885)
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25882)
@sashan and I were discussing the usefulness of the public facing api
for NEW_TOKEN support, and he has concerns over its usefulness and our
being stuck with it if we need to make changes later. Given that it is
a convience api for using multiple CTX-es to share a cache, its fine if
we remove it for now, as that seems like a less common use case.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Saša Nedvědický <sashan@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26517)
Make it clear its only announcing connections, not streams
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Saša Nedvědický <sashan@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26361)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Saša Nedvědický <sashan@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26361)
Add docs for SSL_CTX_set_new_pending_ssl_cb
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Saša Nedvědický <sashan@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26361)
Signed-off-by: Dmitry Belyavskiy <beldmit@gmail.com>
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26753)
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26400)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26683)
These are needed in ML-KEM and ML-DSA, and are likely generally useful,
so public.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26385)
lots of people may want to print params to a buffer. Make it part of
our api
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25630)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24821)
Add a FIPS indicator callback that can be set via
OSSL_INDICATOR_set_callback(). This callback is intended to be run
whenever a non approved algorithm check has occurred and strict checking
has been disabled.The callback may be used to
log non approved algorithms. The callback is passed a type and
description string as well as the cbarg specified in OSSL_INDICATOR_set_callback.
The return value can be either 0 or 1.
A value of 0 can be used for testing purposes to force an error to occur from the algorithm
that called the callback.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24623)
Fixes#5539: Create a new manual page `CMAC_CTX.pod` documenting the deprecated `CMAC_CTX` functions and add the necessary build dependencies. This page includes function descriptions, usage details, and replacement suggestions with the `EVP_MAC` interface.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24814)
Mark the existing `TS_VERIFY_CTX_set_certs` function as deprecated in the
documentation.
Add missing documentation for the deprecated functions `TS_VERIFY_CTX_set_data`,
`TS_VERIFY_CTX_set_imprint`, and `TS_VERIFY_CTX_set_store`.
Write missing documentation for the following functions:
- `TS_VERIFY_CTX_new`
- `TS_VERIFY_CTX_init`
- `TS_VERIFY_CTX_free`
- `TS_VERIFY_CTX_cleanup`
- `TS_VERIFY_CTX_set_flags`
- `TS_VERIFY_CTX_add_flags`
- `TS_VERIFY_CTX_set0_data`
- `TS_VERIFY_CTX_set0_imprint`
- `TS_VERIFY_CTX_set0_store`
- `TS_VERIFY_CTX_set0_certs`
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24701)
- No concurrency, one client-at-a-time
- Blocking
- No client certs
- Fixed chain and key file names
- Minimal support for session resumption
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/24505)
Support for the targetingInformation X.509v3 extension defined in ITU-T
Recommendation X.509 (2019), Section 17.1.2.2. This extension is used
in attribute certificates.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22206)
This function is only useful for EAP-FAST, but was previously undocumented.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24309)
Introduce the capability to retrieve and update Certificate Revocation Lists
(CRLs) in the CMP client, as specified in section 4.3.4 of RFC 9483.
To request a CRL update, the CMP client can send a genm message with the
option -infotype crlStatusList. The server will respond with a genp message
containing the updated CRL, using the -infoType id-it-crls. The client can
then save the CRL in a specified file using the -crlout parameter.
Co-authored-by: Rajeev Ranjan <ranjan.rajeev@siemens.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23768)
Several of the attribute values defined for use by attribute certificates
use multi-valued data in an ASN.1 SEQUENCE. Allow reading of these values
from a configuration file, similar to how generic X.509 extensions are
handled.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
The IETFAtrrSyntax type is used for the values of several attributes
defined in RFC 5755 for use with attribute certificates.
Specifically this type is used with the "Charging Identity" and
"Group" attributes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
Add functions to print an attribute certificate. Several
attribute value types defined by the RFC 5755 specification
are multi-field values (i.e ASN1_SEQUENCE rather than an ASN1_STRING
or similar format). Currently those values are printed using
`ASN1_item_print`. A more user-friendly output mechanism (maybe
similar to the i2r_ functions used for X509 extensions) could be
added in future.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
Only fields that are allowed by RFC 5755 are
accessible through this API. Fields that are only supported
in version 1 attribute certificates (e.g. the AttCertIssuer
v1Form fields) are not implemented.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23360)
Partial fix for #8026
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22656)
slontis
Dmitry Belyavskiy
Neil Horman
Andrew Dinh
Hugo Landau
Michael Baentsch
Matt Caswell
Viktor Dukhovni
Pauli
Richard Levitte
Dimitri John Ledkov
erbsland-dev
Rajeev Ranjan
Jonathan M. Wilbur
Hongren Zheng
Tomas Mraz
Dr. David von Oheimb
Damian Hobson-Garcia