rotated_mac is a 64-byte aligned buffer of size 64 and rotate_offset is secret.
Consider a weaker leakage model(CL) where only cacheline base address is leaked,
i.e address/32 for 32-byte cacheline(CL32).
Previous code used to perform two loads
1. rotated_mac[rotate_offset ^ 32] and
2. rotated_mac[rotate_offset++]
which would leak 2q + 1, 2q for 0 <= rotate_offset < 32
and 2q, 2q + 1 for 32 <= rotate_offset < 64
The proposed fix performs load operations which will always leak 2q, 2q + 1 and
selects the appropriate value in constant-time.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18033)
(cherry picked from commit 3b83638567)
In some corner cases the check for packets
which exceed the allowed record length was missing
when KTLS is initially enabled, when some
unprocessed packets are still pending.
Add at least some tests for KTLS, since we have
currently not very much test coverage for KTLS.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17504)
(cherry picked from commit 8fff986d52)
This replaces the AES-128-CBC-HMAC-SHA1 cipher with a
non-encrypting version for use the test suite.
[extended tests]
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16693)
(cherry picked from commit 64da15c40d)
Various comments referred to s->packet and s->packet_length instead of
s->rlayer.packet and s->rlayer.packet_length. Also fixed is a spot where
RECORD_LAYER_write_pending() should have been used. Based on the review
comments in #16077.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/16086)
Sometimes this function gets called when the buffers have already been
set up. If there is already a partial packet in the read buffer then the
packet pointer will be set to an incorrect value. The packet pointer already
gets reset to the correct value when we first read a packet anyway, so we
don't also need to do it in ssl3_setup_read_buffer.
Fixes#13729
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16077)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Add a "where did this EVP_{CIPHER,MD} come from" flag: global, via fetch,
or via EVP_{CIPHER,MD}_meth_new. Update EVP_{CIPHER,MD}_free to handle all
three origins. The flag is deliberately right before some function pointers,
so that compile-time failures (int/pointer) will occur, as opposed to
taking a bit in the existing "flags" field. The "global variable" flag
is non-zero, so the default case of using OPENSSL_zalloc (for provider
ciphers), will do the right thing. Ref-counting is a no-op for
Make up_ref no-op for global MD and CIPHER objects
Deprecate EVP_MD_CTX_md(). Added EVP_MD_CTX_get0_md() (same semantics as
the deprecated function) and EVP_MD_CTX_get1_md(). Likewise, deprecate
EVP_CIPHER_CTX_cipher() in favor of EVP_CIPHER_CTX_get0_cipher(), and add
EVP_CIPHER_CTX_get1_CIPHER().
Refactor EVP_MD_free() and EVP_MD_meth_free() to call new common
evp_md_free_int() function.
Refactor EVP_CIPHER_free() and EVP_CIPHER_meth_free() to call new common
evp_cipher_free_int() function.
Also change some flags tests to explicit test == or != zero. E.g.,
if (flags & x) --> if ((flags & x) != 0)
if (!(flags & x)) --> if ((flags & x) == 0)
Only done for those lines where "get0_cipher" calls were made.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14193)
Using ERR_LIB_* causes the error output to say 'reason(n)' instead of
the name of the sub-library in question.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14152)
Our free functions should be able to deal with the case where the object
being freed is NULL. This turns out to not be quite the case for DTLS
related objects.
Fixes#13649
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13655)
This code started off as a copy of ssl3_write_bytes(), and the comment
was not updated with the implementation.
Reported by yangyangtiantianlonglong in #13518
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13566)
These two bodies should be grouped together anyway as the reason for
the call to BIO_flush() is to permit using BIO_set_ktls_ctrl_msg().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13090)
When using KTLS, empty fragments sent as a mitigation for known-IV
weakenesses in TLS 1.0 are sent as writes of 0 bytes. The TLS header
and trailer are added to the empty fragment by the kernel.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13090)
Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
DTLS by design ignores records/packets with bad MAC or failed AEAD tag
validation. However, recent changes to have provided cipher
implementations caused tls1_enc() to leave an entry on the error queue
for invalid GCM tags, e.g.:
800BEAEF487F0000:error::Provider routines:gcm_stream_update:cipher operation failed:providers/implementations/ciphers/ciphercommon_gcm.c:306
The BoringSSL tests check for entries on the error queue with
SSL_get_error() and so we were seeing spurious test failures
due to the additional item on the error queue. To avoid leaving
such spurious entries on the error queue, set a mark before calling
the ssl3_enc 'enc' method, and pop to that mark before ignoring
invalid packets.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13251)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Previously we passed it the data plus mac size. Now we just pass it the
data size. We already know the mac size.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12732)
This commit just moves the TLS1 and above implementation to use the TLS
HMAC implementation in the providers.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12732)
The TLS HMAC implementation should take care to calculate the MAC in
constant time in the case of MAC-Then-Encrypt where we have a variable
amount of padding.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12732)
errno is only valid if ktls_read_record() fails with a negative return
value.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12111)
Some applications want even all plaintext copies beeing
zeroized. However, currently plaintext residuals are kept in rbuf
within the s3 record layer.
This patch add the option SSL_OP_CLEANSE_PLAINTEXT to its friends to
optionally enable cleansing of decrypted plaintext data.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12251)
We split these functions out into a separate file because we are
preparing to make this file shared between libssl and providers.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
For CBC ciphersuites using Mac-then-encrypt we have to be careful about
removing the MAC from the record in constant time. Currently that happens
immediately before MAC verification. Instead we move this responsibility
to the various protocol "enc" functions so that MAC removal is handled at
the same time as padding removal.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
Partially fixes#11209.
Before OpenSSL 3.0 in case when peer does not send close_notify,
the behaviour was to set SSL_ERROR_SYSCALL error with errno 0.
This behaviour has changed. The SSL_OP_IGNORE_UNEXPECTED_EOF restores
the old behaviour for compatibility's sake.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11735)
basavesh
Matt Caswell
Bernd Edlinger
xkernel
Peiwei Hu
Tianjia Zhang
Pauli
Tomas Mraz
Rich Salz
Richard Levitte
Richard Levitte
Pauli
Benjamin Kaduk
John Baldwin
Dr. Matthias St. Pierre
Marc
Martin Elshuber
Dr. David von Oheimb
Vadim Fedorenko
Dmitry Belyavskiy