If we reject early data then it is normal for decryption operations to
fail. We should ensure there are no spurious errors on the stack in that
case. This adds a test for that scenario.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20401)
Our tests run so quickly that the ticket age is virtually zero. This may
not show up problems in the age calculations, so we artificially add some
age to the tickets in some runs.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20387)
Test that sending large app data records works correctly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20085)
The KTLS test uses a TLSv1.2 cipher that uses ECDHE
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19841)
Fixes openssl#19771
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19787)
TLS device offload allows to perform zerocopy sendfile transmissions.
FreeBSD provides this feature by default, and Linux 5.19 introduced it
as an opt-in. Zerocopy improves the TX rate significantly, but has a
side effect: if the underlying file is changed while being transmitted,
and a TCP retransmission happens, the receiver may get a TLS record
containing both new and old data, which leads to an authentication
failure and termination of connection. This effect is the reason Linux
makes a copy on sendfile by default.
This commit adds support for TLS zerocopy sendfile on Linux disabled by
default to avoid any unlikely backward compatibility issues on Linux,
although sacrificing consistency in OpenSSL's behavior on Linux and
FreeBSD. A new option called KTLSTxZerocopySendfile is added to enable
the new zerocopy behavior on Linux. This option should be used when the
the application guarantees that the file is not modified during
transmission, or it doesn't care about breaking the connection.
The related documentation is also added in this commit. The unit test
added doesn't test the actual functionality (it would require specific
hardware and a non-local peer), but solely checks that it's possible to
set the new option flag.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18650)
As well as SSL_shutdown() itself this excercises the async write paths
in ssl3_dispatch_alert().
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19550)
TLS pipelining provides the ability for libssl to read or write multiple
records in parallel. It requires special ciphers to do this, and there are
currently no built-in ciphers that provide this capability. However, the
dasync engine does have such a cipher, so we add a test for this capability
using that engine.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19456)
We also clean up some of the KTLS code while we are doing it now that all
users of KTLS have been moved to the new write record layer.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
We also convert to passing COMP_METHOD rather than SSL_COMP to the record
layer. The former is a public type while the latter is internal only - and
the only thing we need from SSL_COMP is the method.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19217)
A 0 return from a ticket key callback should indicate that crypto parameters
are not currently available and that the handshake should continue without
generating/using the ticket.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18990)
We have some ssl_test_new tests for record padding. But these only use
the block padding approach set via a config file on the SSL_CTX. We add
tests for all the various API calls.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19103)
Fields such as rrlmethod and rrl are entirely related to the record layer,
and so should be in that object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This removes some references to the SSL object from the record layer.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
If read_ahead is switched on, it should still work even if the data that
is read cross epochs.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We move the old ssl3_get_record function to conform with the new record
layer design.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Add a test to ensure that a connection started via DTLSv1_listen() can
be completed through to handshake success. Previous DTLSv1_listen()
testing only tested the function itself and did not confirm that a
connection can actually be achieved using it.
This is important to test some codepaths being affected by the record layer
refactor.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
sslapitest has a test for multiblock writes. Since multiblock writing is
only available on some platforms the multiblock test checks whether we are
on such a platform first, and skips the test if we are not. Unfortunately
a bug in the check meant that we always skipped the test regardless of the
platform.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18983)
Fixes#18690
In some circumstances, it's possible that when using an external
database for the session cache, that pulling in an entry from that
cache to the internal cache will cause the newly added entry to
be deleted from the internal cache. This is likely to happen when
the internal cache is set to have a small size, and the newly added
entry's timeout places it at the end of the cache list.
This could be fixed by updating the timestamp of the session (via
`SSL_SESSION_set_time()` or `SSL_SESSION_set_timeout()`) before
adding to the cache. But that may not be desireable.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18905)
Make the SSL object polymorphic based on whether this is
a traditional SSL connection, QUIC connection, or later
to be implemented a QUIC stream.
It requires adding if after every SSL_CONNECTION_FROM_SSL() call
which itself has to be added to almost every public SSL_ API call.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18612)
Currently we do not have any way to retrieve these values once set.
Fixes#18035.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18038)
This removes a guard condition that prevents KTLS being enabled for
receiving in TLS 1.3. Use the correct sequence number and BIO for
receive vs transmit offload.
Co-authored-by: John Baldwin <jhb@FreeBSD.org>
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17942)
For TLSv1.3, limit ticket lifetime hint to 1 week per RFC8446
Fixes#17948
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17952)
Provide a different mechanism to indicate that the application wants
to retry the verification. The negative result of the callback function
now indicates an error again.
Instead the SSL_set_retry_verify() can be called from the callback
to indicate that the handshake should be suspended.
Fixes#17568
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17825)
The SNI test in test_cert_cb_int() was always failing because it used
SSL_CTX_new() instead of SSL_CTX_new_ex() and was therefore not using the
correct libctx. PR #17739 amended the test to check the return value from
SSL_CTX_new() which made the failure obvious.
Fixes#17757
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/17758)
As the potential failure of the memory allocation, it should
be better to check the return value of SSL_CTX_new() and return
error if fails, like SSL_CTX_new_ex().
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17739)
When pem_password_cb is used from SSL_CTX, its size
parameter should be equal to PEM_BUFSIZE.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/17320)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17033)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16918)
Test the scenario where we add a custom extension to a cetificate
request and expect a response in the client's certificate message.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16634)
Fix tests that were expecting a default security level of 1 to work with
the new default of 2.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/16760)
This is the length of the tag they use and should be considered an upper bound
on their strength.
This lowers their security strength to level 0.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16652)
The TRSCV state abbrev was used for two states:
* TLS_ST_CR_CERT_VRFY
* TLS_ST_SW_CERT_VRFY
The second one is wrong because it's a write operation.
The state for TLS_ST_SW_CERT_VRFY should be "TWSCV"
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16327)
Test that SSL_key_update() is not allowed if there are writes pending.
Test that there is no reset of the packet pointer in ssl3_setup_read_buffer().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16085)
Fixes build failures if using enable-ktls in conjunction with --strict-warnings
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16090)
Because of how the 'client_multi' variable is set, we end up
running the tests where the client configures multiple groups (and
the server only configures one) before the ones where the server configures
multiple groups (and the client only configures one).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16007)
Fixes#15963
INSTALL.md uses these exact options as an example so it should work.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15965)
- Use SSL_set_ciphersuites for TLS 1.3 tests instead of using
SSL_set_cipher_list.
- Don't bother passing a sequence number size to KTLS test functions.
These functions always test TLS (and not DTLS) for which the
sequence size is always the same. In addition, even for DTLS the
check in question (verifying that the sequence number fields in SSL
do not change) should still pass when doing a before/after
comparison of the field.
- Define a helper structure to hold the TLS version and cipher name
for a single KTLS test.
- Define an array of such structures with valid KTLS ciphers and move
#ifdef's for TLS versions and supported ciphers out of test
functions and instead use them to define the valid members of this
array. This also permits using TLS 1.3 cipher suite names for
TLS 1.3 tests.
- Use separate tests per cipher for test_ktls to give more
fine-grained pass/fail results as is already done for
test_ktls_sendfile.
- While here, rename test_ktls_sendfile to execute_test_ktls_sendfile
and test_ktls_sendfile_anytls to test_ktls_sendfile. This is more
consistent with the naming used for test_ktls as well as other tests
in this file.
- Close the file descriptors used for temporary sockets in ktls tests.
- Don't assume that KTLS is supported for all compile-time supported
cipher suites at runtime. If the kernel fails to offload a given
cipher suite, skip the test rather than failing it. FreeBSD kernels
may not offload all of the cipher suites supported by its KTLS if a
suitable driver or KTLS backend is not present.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15814)
Sort SSL_SESSION structures by timeout in the linked list.
Iterate over the linked list for timeout, stopping when no more
session can be flushed.
Do SSL_SESSION_free() outside of SSL_CTX lock
Update timeout upon use
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8687)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Now that we can become "in init" directly after the call, test the
various scenarios where explicit SSL_do_handshake() calls can come
into play.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14817)
This is nearly comprehensive, but we cannot exercise the functionality
for PSK-only TLS 1.3 resumption, since openssl talking to openssl will
always negotiate psk_dhe_ke.
Exercise both the TLS 1.3 and 1.2 cases, for initial handshakes
and resumptions, and for ECDHE and FFDHE.
Since RFC 7919 named groups (for FFDHE) are only supported for TLS 1.3,
the TLS 1.2 versions of those scenarios expect to get NID_undef since
the key exchange was not performed using a named group.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14750)
We don't implement RFC 7919 named groups for TLS 1.2, so we can
only test the ECDHE case for non-TLS-1.3.
Interestingly, though the test_key_exchange() routine claimed to
be exercising ffdhe2048 with TLS 1.2, the configured ciphers were
incompatible with DHE key exchange, so we ended up just using RSA
key transport and not doing an ephemeral key exchange at all.
Reconfigure the tests to actually exercise ephemeral key exchange
for both the EC and FF cases (even though we don't use the named
group information for the finite-field case).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14750)
Using OSSL_STORE is too heavy and breaks things.
There were also needed various fixes mainly for missing proper
handling of the SM2 keys in the OSSL_DECODER.
Fixes#14788
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15045)
SHA1 is now in security level 0. SHA1 is required for DTLSv1.1. Therefore
sslapitest needed some adjustments in the event that DTLSv1.2 is disabled.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15047)
It's possible to set an invalid protocol list that will be sent in a
ClientHello. This validates the inputs to make sure this does not
happen.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14815)
It has always been the case that KTLS is not compiled by default. However
if it is compiled then it was automatically used unless specifically
configured not to. This is problematic because it avoids any crypto
implementations from providers. A user who configures all crypto to use
the FIPS provider may unexpectedly find that TLS related crypto is actually
being performed outside of the FIPS boundary.
Instead we change KTLS so that it is disabled by default.
We also swap to using a single "option" (i.e. SSL_OP_ENABLE_KTLS) rather
than two separate "modes", (i.e. SSL_MODE_NO_KTLS_RX and
SSL_MODE_NO_KTLS_TX).
Fixes#13794
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14799)
X509_VERIFY_PARAM_inherit() now copies hostflags independently of hosts.
Previously hostflags were only copied when at least one host was set.
Typically applications don't configure hosts on SSL_CTX. The change
enables applications to configure hostflags on SSL_CTX and have OpenSSL
copy the flags from SSL_CTX to SSL.
Fixes: https://github.com/openssl/openssl/issues/14579
Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14743)
OTC have decided that the EVP_PKEY_get0* functions should have a const
return type. This is a breaking change to emphasise that these values
should be considered as immutable.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14319)
Without this, a provider has no way to know that an application
has finished with the array it returned earlier. A non-caching provider
requires this information.
Fixes#12974
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12974)
The existing names such as EVP_PKEY_param_fromdata_settable were a bit
confusing since the 'param' referred to key params not OSSL_PARAM. To simplify
the interface a 'selection' parameter will be passed instead. The
changes are:
(1) EVP_PKEY_fromdata_init() replaces both EVP_PKEY_key_fromdata_init() and EVP_PKEY_param_fromdata_init().
(2) EVP_PKEY_fromdata() has an additional selection parameter.
(3) EVP_PKEY_fromdata_settable() replaces EVP_PKEY_key_fromdata_settable() and EVP_PKEY_param_fromdata_settable().
EVP_PKEY_fromdata_settable() also uses a selection parameter.
Fixes#12989
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14076)
Even if EC and DH are disabled then we may still be able to use TLSv1.3
if we have groups that have been plugged in by an external provider.
Fixes#13767
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
The client-side cert verification callback function may not only return
as usual for success or 0 for failure, but also -1,
typically on failure verifying the server certificate.
This makes the handshake suspend and return control to the calling application
with SSL_ERROR_WANT_RETRY_VERIFY.
The app can for instance fetch further certificates or cert status information
needed for the verification.
Calling SSL_connect() again resumes the connection attempt
by retrying the server certificate verification step.
This process may even be repeated if need be.
The core implementation of the feature is in ssl/statem/statem_clnt.c,
splitting tls_process_server_certificate() into a preparation step
that just copies the certificates received from the server to s->session->peer_chain
(rather than having them in a local variable at first) and returns to the state machine,
and a post-processing step in tls_post_process_server_certificate() that can be repeated:
Try verifying the current contents of s->session->peer_chain basically as before,
but give the verification callback function the chance to pause connecting and
make the TLS state machine later call tls_post_process_server_certificate() again.
Otherwise processing continues as usual.
The documentation of the new feature is added to SSL_CTX_set_cert_verify_callback.pod
and SSL_want.pod.
This adds two tests:
* A generic test in test/helpers/handshake.c
on the usability of the new server cert verification retry feature.
It is triggered via test/ssl-tests/03-custom_verify.cnf.in (while the bulky auto-
generated changes to test/ssl-tests/03-custom_verify.cnf can be basically ignored).
* A test in test/sslapitest.c that demonstrates the effectiveness of the approach
for augmenting the cert chain provided by the server in between SSL_connect() calls.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13906)
OPENSSL_NO_DEPRECATED_3_0 should be used rather than OPENSSL_NO_DEPRECATED,
as the latter doesn't take the configuration option '--api=' in account.
Fixes#13865
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13866)
Function SSL_group_to_name() added, together with documentation and tests.
This now permits displaying names of internal and external
provider-implemented groups.
Partial fix of #13767
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13785)
We skip a test that uses the no-legacy option. Unfortuantely there is
no OPENSSL_NO_LEGACY to test, so we just check whether we were successful
in loading the legacy provider - and if not we skip the test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
If an SNI callback has been set then we may have no certificuates suitable
for TLSv1.3 use configured for the current SSL_CTX. This should not prevent
us from negotiating TLSv1.3, since we may change the SSL_CTX by the time we
need a suitable certificate.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13304)
If we're using TLSv1.2 then the test_sigalgs_available test needs to be
careful which ciphersuite is selected in order for the test to behave
correctly.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13596)
Check that the size of the DH parameters we select changes according to
the size of the certificate key or symmetric cipher (if no certificate).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
We support a number of different ways of setting temporary DH params. We
should test that they all work correctly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Automatically rename all instances of _with_libctx() to _ex() as per
our coding style.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
While here, check for failure from RAND_bytes_ex as well.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12111)
- Apply the cipher list to the server context as well as the client
context. The tests still worked for AES-GCM cipher suites as those
are in the default list of ciphers. AES-CCM cipher suites are not
in the default list and require the cipher list to be set.
- Use the correct cipher name for AES-CCM.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12111)
KTLS RX is not yet supported for TLS 1.3.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12111)
This skips tests using KTLS RX when run on systems that only support
KTLS TX.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12111)
Matt Caswell
Michael Baentsch
Todd Short
Daniel Fiala
Maxim Mikityanskiy
Todd Short
Tomas Mraz
Hugo Landau
Daiki Ueno
Jiasheng Jiang
Dimitris Apostolou
Dr. David von Oheimb
Peiwei Hu
slontis
x2018
Dmitry Belyavskiy
Pauli
yangyangtiantianlonglong
Benjamin Kaduk
John Baldwin
Christian Heimes
Nan Xiao
Pauli
Pauli
Richard Levitte
Dr. David von Oheimb
Richard Levitte
Michael Baentsch
Dr. Matthias St. Pierre
Nicola Tuveri
Vadim Fedorenko