Also add missing getter functionss OSSL_CMP_{CTX,HDR}_get0_geninfo_ITAVs() to CMP API.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21281)
"=over 1" is too small. Use "=over 2" so that list items are
displayed correctly in the generated man-page.
You can check the man-page using the following command:
cd doc && pod2man man3/OSSL_PARAM_int.pod | man /dev/stdin
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22974)
The EVP interface explicitly allows in-place encryption/decryption,
but this fact is just 'partially' documented in `EVP_EncryptUpdate(3)`
(pun intended): the manual page mentions only operation failure in
case of 'partial' overlaps. This is not even correct, because
the check for partially overlapping buffers is only implemented
in legacy code paths.
Currently, in-place encryption/decryption is only documented for
RSA (`RSA_public_encrypt(3)`) and DES (`DES_ecb_encrypt(3)`), as
well as in the provider interface (`provider-cipher(7)`).
This commit amends `EVP_EncryptUpdate(3)` and `provider-cipher(7)`
to make the front-end and back-end documentation consistent.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22875)
well know -> well known
CLA: trivial
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22778)
Fixes#7894
This allows SHAKE to squeeze multiple times with different output sizes.
The existing EVP_DigestFinalXOF() API has been left as a one shot
operation. A similar interface is used by another toolkit.
The low level SHA3_Squeeze() function needed to change slightly so
that it can handle multiple squeezes. This involves changing the
assembler code so that it passes a boolean to indicate whether
the Keccak function should be called on entry.
At the provider level, the squeeze is buffered, so that it only requests
a multiple of the blocksize when SHA3_Squeeze() is called. On the first
call the value is zero, on subsequent calls the value passed is 1.
This PR is derived from the excellent work done by @nmathewson in
https://github.com/openssl/openssl/pull/7921
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21511)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22459)
Test case amended from code initially written by Bernd Edlinger.
Fixes#21110
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22421)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22487)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22487)
BLAKE2 is not really an extensible output function unlike SHAKE
as the digest size must be set during the context initialization.
Thus it makes no sense to use OSSL_DIGEST_PARAM_XOFLEN.
We also need to adjust EVP_DigestFinal_ex() to query the
OSSL_DIGEST_PARAM_SIZE as gettable ctx param for the size.
Fixes#22488
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22491)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22485)
Earlier today, it took me five manuals! to find what on earth the
"Performance"/"EVP_MD_fetch(3)" crosslinks actually mean:
EVP_sha1(3)
crypto(7)
EVP_MD_fetch(3) (but not there! don't read that!)
OSSL_PROVIDER-default(7)
EVP_MD-SHA1(7)
If, instead, EVP_sha1(3) referenced EVP_MD-SHA1(7) at /all/,
which it should do, since it's supposed to be what you're replacing it
with, but it doesn't actually say that, maybe people would use it.
I know I didn't because it's basically just deadass buried
As found by git grep -l 'and should consider using'
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22420)
Return SSL_SENT_SHUTDOWN and SSL_RECEIVED_SHUTDOWN with semantics
similar to TLS connections.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22408)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22265)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22262)
It is also not allowed by doc nits check to have
multiple includes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22276)
In OpenSSL 3.x, the documentation for PKCS5_PBKDF2_HMAC incorrectly states
that an iter value less than 1 is treated as a single iteration. Upon further
investigation in providers/implementations/kdfs/pbkdf2.c, it appears that
invalid iter values will result in failure and raise the
PROV_R_INVALID_ITERATION_COUNT error. This commit corrects the documentation
to accurately reflect the behavior in OpenSSL 3.x.
Closes openssl#22168
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22252)
Rename `DSA_generate_prime[_ex]` to `DSA_generate_parameters[_ex]`,
fixing a copy&paste error from the `BN_generate_prime[_ex]` paragraph
in commit b3696a55a5.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22242)
Include the necessary header file openssl/pem.h in the
documentation to ensure that all functions related to
d2i_PKCS8PrivateKey are correctly defined.
Closes openssl#22188
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22253)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22247)
The info callback is not prototyped correctly, and the code
example fails to compile because of const-incorrectness.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22224)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22164)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)
Add documentation for the function SSL_CONF_CTX_finish() in man3.
Fixes#22084
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22128)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22063)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21965)
The PKCS5 (RFC 8018) standard uses a 64 bit salt length for PBE, and
recommends a minimum of 64 bits for PBES2. For FIPS compliance PBKDF2
requires a salt length of 128 bits.
This affects OpenSSL command line applications such as "genrsa" and "pkcs8"
and API's such as PEM_write_bio_PrivateKey() that are reliant on the
default salt length.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21858)
Hugo Landau
Dr. David von Oheimb
James Muir
slontis
Matthias St. Pierre
Sean Bright
Markus Minichmayr
наб
Stephen Farrell
Dr. David von Oheimb
Tomas Mraz
Matt Caswell
Frederik Wedel-Heinen
Sumitra Sharma
Dmitry Belyavskiy
Dimitri Papadopoulos
Vladimir Kotal