is required by client or server. An application can decide which
certificate chain to present based on arbitrary criteria: for example
supported signature algorithms. Add very simple example to s_server.
This fixes many of the problems and restrictions of the existing client
certificate callback: for example you can now clear existing certificates
and specify the whole chain.
If OPENSSL_MAX_TLS1_2_CIPHER_LENGTH is set then limit the size of client
ciphersuites to this value. A value of 50 should be sufficient.
Document workarounds in CHANGES.
certificate chain instead of an X509 structure.
This makes it easier to enhance code in future and the chain
output functions have access to the CERT_PKEY structure being
used.
The cipher definitions of these ciphersuites have been around since SSLeay
but were always disabled. Now OpenSSL supports DH certificates they can be
finally enabled.
Various additional changes were needed to make them work properly: many
unused fixed DH sections of code were untested.
Submitted by: Peter Sylvester <peter.sylvester@edelweb.fr>
Reviewed by: steve
Make SRP conformant to rfc 5054.
Changes are:
- removal of the addition state after client hello
- removal of all pre-rfc srp alert ids
- sending a fatal alert when there is no srp extension but when the
server wants SRP
- removal of unnecessary code in the client.
Parse certificate request message and set digests appropriately.
Generate new TLS v1.2 format certificate verify message.
Keep handshake caches around for longer as they are needed for client auth.
algorithms extension (including everything we support). Swicth to new
signature format where needed and relax ECC restrictions.
Not TLS v1.2 client certifcate support yet but client will handle case
where a certificate is requested and we don't have one.
Submitted by: steve@openssl.org
More robust fix and workaround for PR#1949. Don't try to work out if there
is any write pending data as this can be unreliable: always flush.
work in SSLv3: initial handshake has no extensions but includes MCSV, if
server indicates RI support then renegotiation handshakes include RI.
NB: current MCSV value is bogus for testing only, will be updated when we
have an official value.
Change mismatch alerts to handshake_failure as required by spec.
Also have some debugging fprintfs so we can clearly see what is going on
if OPENSSL_RI_DEBUG is set.
of when a session is loaded. This will mean that applications that
just hold onto SSL_SESSION structures and never call d2i_SSL_SESSION()
will still work.
Submitted by: Mike Frysinger <vapier@gentoo.org>
Approved by: steve@openssl.org
Change domd test to match 1.0.0+ version: check $MAKEDEPEND
ends in "gcc" to support cross compilers.
The functions ENGINE_ctrl(), OPENSSL_isservice(), EVP_PKEY_sign(),
CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error fix
so the return code is checked correctly.
Reviewed by: steve@openssl.org
Various GOST ciphersuite and ENGINE fixes. Including...
Allow EVP_PKEY_set_derive_peerkey() in encryption operations.
New flag when certificate verify should be omitted in client key exchange.
knock-on work than expected - they've been extracted into a patch
series that can be completed elsewhere, or in a different branch,
before merging back to HEAD.
Fix flaw if 'Server Key exchange message' is omitted from a TLS
handshake which could lead to a cilent crash as found using the
Codenomicon TLS test suite (CVE-2008-1672)
Reviewed by: openssl-security@openssl.org
Obtained from: mark@awe.com
of handshake failure
2. Changes to x509_certificate_type function (crypto/x509/x509type.c) to
make it recognize GOST certificates as EVP_PKT_SIGN|EVP_PKT_EXCH
(required for s3_srvr to accept GOST client certificates).
3. Changes to EVP
- adding of function EVP_PKEY_CTX_get0_peerkey
- Make function EVP_PKEY_derive_set_peerkey work for context with
ENCRYPT operation, because we use peerkey field in the context to
pass non-ephemeral secret key to GOST encrypt operation.
- added EVP_PKEY_CTRL_SET_IV control command. It is really
GOST-specific, but it is used in SSL code, so it has to go
in some header file, available during libssl compilation
4. Fix to HMAC to avoid call of OPENSSL_cleanse on undefined data
5. Include des.h if KSSL_DEBUG is defined into some libssl files, to
make debugging output which depends on constants defined there, work
and other KSSL_DEBUG output fixes
6. Declaration of real GOST ciphersuites, two authentication methods
SSL_aGOST94 and SSL_aGOST2001 and one key exchange method SSL_kGOST
7. Implementation of these methods.
8. Support for sending unsolicited serverhello extension if GOST
ciphersuite is selected. It is require for interoperability with
CryptoPro CSP 3.0 and 3.6 and controlled by
SSL_OP_CRYPTOPRO_TLSEXT_BUG constant.
This constant is added to SSL_OP_ALL, because it does nothing, if
non-GOST ciphersuite is selected, and all implementation of GOST
include compatibility with CryptoPro.
9. Support for CertificateVerify message without length field. It is
another CryptoPro bug, but support is made unconditional, because it
does no harm for draft-conforming implementation.
10. In tls1_mac extra copy of stream mac context is no more done.
When I've written currently commited code I haven't read
EVP_DigestSignFinal manual carefully enough and haven't noticed that
it does an internal digest ctx copying.
This implementation was tested against
1. CryptoPro CSP 3.6 client and server
2. Cryptopro CSP 3.0 server
(draft-rescorla-tls-opaque-prf-input-00.txt), and do some cleanups and
bugfixes on the way. In particular, this fixes the buffer bounds
checks in ssl_add_clienthello_tlsext() and in ssl_add_serverhello_tlsext().
Note that the opaque PRF Input TLS extension is not compiled by default;
see CHANGES.
This change resolves a number of problems and obviates multiple kludges.
A new feature is that you can now say "AES256" or "AES128" (not just
"AES", which enables both).
In some cases the ciphersuite list generated from a given string is
affected by this change. I hope this is just in those cases where the
previous behaviour did not make sense.
1) Certificate Message with no certs
OpenSSL implementation sends the Certificate message during SSL
handshake, however as per the specification, these have been omitted.
-- RFC 2712 --
CertificateRequest, and the ServerKeyExchange shown in Figure 1
will be omitted since authentication and the establishment of a
master secret will be done using the client's Kerberos credentials
for the TLS server. The client's certificate will be omitted for
the same reason.
-- RFC 2712 --
3) Pre-master secret Protocol version
The pre-master secret generated by OpenSSL does not have the correct
client version.
RFC 2712 says, if the Kerberos option is selected, the pre-master
secret structure is the same as that used in the RSA case.
TLS specification defines pre-master secret as:
struct {
ProtocolVersion client_version;
opaque random[46];
} PreMasterSecret;
where client_version is the latest protocol version supported by the
client
The pre-master secret generated by OpenSSL does not have the correct
client version. The implementation does not update the first 2 bytes
of random secret for Kerberos Cipher suites. At the server-end, the
client version from the pre-master secret is not validated.
PR: 1336
- hide the EC_KEY structure definition in ec_lcl.c + add
some functions to use/access the EC_KEY fields
- change the way how method specific data (ecdsa/ecdh) is
attached to a EC_KEY
- add ECDSA_sign_ex and ECDSA_do_sign_ex functions with
additional parameters for pre-computed values
- rebuild libeay.num from 0.9.7
Dr. Stephen Henson
Ben Laurie
Bodo Möller
Geoff Thorpe
Andy Polyakov
Richard Levitte
Nils Larsch