Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Saša Nedvědický <sashan@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26991)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/26813)
- When used as KEMs in TLS the ECDHE algorithms are NOT subjected to
HPKE Extract/Expand key derivation. Instead the TLS HKDF is used
as usual.
- Consequently these KEMs are just the usual ECDHE key exchange
operations, be it with the encap ECDH private key unavoidably
ephemeral.
- A new "MLX" KEM provider is added that supports four hybrids of EC/ECX
DH with ML-KEM:
* ML-KEM-768 + X25519
* ML-KEM-1024 + X448
* P-256 + ML-KEM-768
* P-384 + ML-KEM-1024
- Support listing of implemented TLS groups.
The SSL_CTX_get0_implemented_groups() function and new
`openssl list -tls-groups` and `openssl list -all-tls-groups`
commands make it possible to determine which groups are
implemented by the SSL library for a particular TLS version
or range of versions matching an SSL_CTX.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26220)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26217)
This PR is the implementation of concluded discussion that occurred in a
draft PR #25605. This changes were mainly authored by @martinschmatz
with some contribution from myself.
It addresses issue #21633
This extends the group list definition to support a more complex
definition while still retaining backward compatibility with the simple
form of colon separated groups.
Details of the agreed format and expected behaviour can be found in
#25605 and in the documentation changes.
Signed-off-by: Dave Kelsey <d_kelsey@uk.ibm.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26445)
Also add brainpool curves
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25821)
Added SSL_set_block_padding_ex() and SSL_CTX_set_block_padding_ex()
to allow separate padding block size values for handshake messages
and application data messages.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24796)
also adding to SignatureAlgorithms section
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/24499)
TLS record compression is off by default. Even if you switch it on, it
cannot be used at security level 2 which is the default in OpenSSL 3.2 and
above. Update the docs to point this out.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23104)
TLS device offload allows to perform zerocopy sendfile transmissions.
FreeBSD provides this feature by default, and Linux 5.19 introduced it
as an opt-in. Zerocopy improves the TX rate significantly, but has a
side effect: if the underlying file is changed while being transmitted,
and a TCP retransmission happens, the receiver may get a TLS record
containing both new and old data, which leads to an authentication
failure and termination of connection. This effect is the reason Linux
makes a copy on sendfile by default.
This commit adds support for TLS zerocopy sendfile on Linux disabled by
default to avoid any unlikely backward compatibility issues on Linux,
although sacrificing consistency in OpenSSL's behavior on Linux and
FreeBSD. A new option called KTLSTxZerocopySendfile is added to enable
the new zerocopy behavior on Linux. This option should be used when the
the application guarantees that the file is not modified during
transmission, or it doesn't care about breaking the connection.
The related documentation is also added in this commit. The unit test
added doesn't test the actual functionality (it would require specific
hardware and a non-local peer), but solely checks that it's possible to
set the new option flag.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18650)
This option is no longer set by default from OpenSSL 3.0.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/17748)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15415)
Add -client_renegotiation flag support. The -client_renegotiation flag is
equivalent to SSL_OP_ALLOW_CLIENT_RENEGOTIATION. Add support to the app,
the config code, and the documentation.
Add SSL_OP_ALLOW_CLIENT_RENEGOTIATION to the SSL tests. We don't need to
always enable it, but there are so many tests so this is the easiest thing
to do.
Add a test where client tries to renegotiate and it fails as expected. Add
a test where server tries to renegotiate and it succeeds. The second test
is supported by a new flag, -immediate_renegotiation, which is ignored on
the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15184)
Previously we would set SSL_OP_LEGACY_SERVER_CONNECT by default in
SSL_CTX_new(), to allow connections to legacy servers that did not
implement RFC 5746.
It has been more than a decade since RFC 5746 was published, so
there has been plenty of time for implmentation support to roll out.
Change the default behavior to be to require peers to support
secure renegotiation. Existing applications that already cleared
SSL_OP_LEGACY_SERVER_CONNECT will see no behavior change, as
re-clearing the flag is just a little bit of redundant work.
The old behavior is still available by explicitly setting the flag
in the application.
Also remove SSL_OP_LEGACY_SERVER_CONNECT from SSL_OP_ALL, for
similar reasons.
Document the behavior change in CHANGES.md, and update the
SSL_CTX_set_options() and SSL_CONF_cmd manuals to reflect the change
in default behavior.
Fixes: 14848
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
KTLS support has been changed to be off by default, and configuration is
via a single "option" rather two "modes". Documentation is updated
accordingly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14799)
The 'MinProtocol' and 'MaxProtocol' configuration commands now silently
ignore TLS protocol version bounds when configurign DTLS-based contexts,
and conversely, silently ignore DTLS protocol version bounds when
configuring TLS-based contexts. The commands can be repeated to set
bounds of both types. The same applies with the corresponding
"min_protocol" and "max_protocol" command-line switches, in case some
application uses both TLS and DTLS.
SSL_CTX instances that are created for a fixed protocol version (e.g.
TLSv1_server_method()) also silently ignore version bounds. Previously
attempts to apply bounds to these protocol versions would result in an
error. Now only the "version-flexible" SSL_CTX instances are subject to
limits in configuration files in command-line options.
Expected to resolve#12394
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #12472
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12320)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10191)
Refactor common flags for SSL/TLS connection options.
Update SSL_CONF_cmd.pod to match ordering.
Rewrite much of the documentation.
Fixes#10160
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10191)
Also patch find-doc-nits to ignore a Microsoft trademark and not
flag it as a spelling error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10023)
The option is a flag for Options, not a standalone setting.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8292)
Add SSL_OP64_NO_EXTENDED_MASTER_SECRET, that can be set on either
an SSL or an SSL_CTX. When processing a ClientHello, if this flag
is set, do not indicate that the EMS TLS extension was received in
either the ssl3 object or the SSL_SESSION. Retain most of the
sanity checks between the previous and current session during
session resumption, but weaken the check when the current SSL
object is configured to not use EMS.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3910)
While stereotyped repetitions are frowned upon in literature, they
serve a useful purpose in manual pages, because it is easier for
the user to find certain information if it is always presented in
the same way. For that reason, this commit harmonizes the varying
formulations in the HISTORY section about which functions, flags,
etc. were added in which OpenSSL version.
It also attempts to make the pod files more grep friendly by
avoiding to insert line breaks between the symbol names and the
corresponding version number in which they were introduced
(wherever possible). Some punctuation and typographical errors
were fixed on the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7854)
Add or update the documentation of the different man pages in relation to TLSv1.3 behaviour.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/6939)
This also adds the ability to control this through s_server
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6469)
In 1.0.2 you could configure automatic ecdh params by using the
ECDHParameters config directive and setting it to the value
"+Automatic" or just "Automatic". This is no longer required in 1.1.0+
but we still recognise the "+Automatic" keyword for backwards compatibility.
However we did not recognise just "Automatic" without the leading "+" which
is equally valid. This commit fixes that omission.
Fixes#4113
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6035)
openssl-machine
Viktor Dukhovni
Dave Kelsey
Michael Baentsch
Tomas Mraz
Stephen Farrell
Matt Caswell
Markus Minichmayr
Steffen Nurpmeso
Maxim Mikityanskiy
Todd Short
Hugo Landau
Todd Short
Rich Salz
Tommy Chiang
Benjamin Kaduk
Gustaf Neumann
Nikolay Morozov
raja-ashok
Paul Yang
Hubert Kario
Dr. Matthias St. Pierre
Richard Levitte