Ensure we test the case where the port value is empty in the URL.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22961)
Test that input value of 1 for p is treated as an error
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22960)
Confirm that using an ENGINE works as expected with TLS even if it is
loaded late (after construction of the SSL_CTX).
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22864)
Since the gen->type will not be set in a2i_GENERAL_NAME
the gen->d.otherName will not be automatically
cleaned up by GENERAL_NAME_free.
Also fixed a similar leak in a2i_GENERAL_NAME,
where ASN1_STRING_set may fail but gen->d.ia5
will not be automatically cleaned up.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22996)
Test the next arithmetic operation to safely determine if adding the
next digit in the passed property string will overflow
Also, noted a bug in the parse_hex code. When parsing non-digit
characters (i.e. a-f and A-F), we do a tolower conversion (which is
fine), and then subtract 'a' to get the hex value from the ascii (which
is definately wrong). We should subtract 'W' to convert tolower
converted hex digits in the range a-f to their hex value counterparts
Add tests to test_property_parse_error to ensure overflow checks work
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22874)
Like in #17345, evp_extra_test links libcrypto statically, but also has
a dynamic/shared load via the legacy provider, which leads to ambiguous
behavior in evp_extra_test on some platforms, usually a crash (SIGSEGV)
on exit via the atexit handlers. Statically link the legacy provider to
avoid this.
Fixes#22819
Helped-by: Neil Horman <nhorman@openssl.org>
Helped-by: Tomas Mraz <tomas@openssl.org>
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22905)
We test its validity by trying to load it.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22866)
Common symbols (type 'C' in the 'nm' output) are allowed to be defined more
than once. This makes test/recipes/01-test_symbol_presence.t reflect that.
Fixes#22869 (partially)
Fixes#22837
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22880)
On some platforms, the compiler may add symbols that aren't ours and that we
should ignore.
They are generally expected to start with a double underscore, and thereby
easy to detect.
Fixes#22869 (partially)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22880)
Coverity recorded issues 1551739 and 1551737, a potential double free in the
tests. It occurs when the DUP operation fails in such a way val3_read is
returned as the same pointer as val2_read. Ideally it should never
happen, but resetting val3_read to 0 should satisfy coverity that there
is no issue here
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22800)
Add null check to cmac_size(). This avoids a seg-fault encountered
with cmac when EVP_MAC_CTX_get_mac_size() is called before init.
Extend mac testing in evp_test.c to check that the sizes returned by
EVP_MAC_CTX_get_mac_size() before and after init make sense (this also
ensures that we no longer seg-fault).
Fixes#22842
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22858)
There were no PKIX-TA(0) SPKI(1) Full(0) (i.e. "0 1 0") test cases in
"danetest.in".
There is now at least a success case, which will exercise freeing the public
key after it is sanity checked, since with PKIX-TA(0) there's nothing we can do
with just the raw public key, a full chain to a local trust anchor is in any
case required.
The failure (to match) code path is already well oiled, but failure to decode
while adding malfored TLSA records could still use some additional tests...
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22821)
We don't need the decoded X.509 Full(0) certificate for the EE usages 1 and 3,
because the leaf certificate is always part of the presented chain, so the
certificate is only validated as well-formed, and then discarded, but the
TLSA record is of course still used after the validation step.
Added DANE test cases for: 3 0 0, 3 1 0, 1 0 0, and 1 1 0
Reported by Claus Assmann.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22821)
Check that the "consumed" parameter is working as expected.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22718)
If a single packet contains data from multiple streams we need to keep track
of the cummulative connection level credit consumed across all of the
streams. Once the connection level credit has been consumed we must stop
adding stream data.
Fixes#22706
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22718)
Instead of just accepting a number of bytes, allows openssl rand to
accept a k|m|g suffix to scale to kbytes/mbytes/gbytes
Fixes#22622
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22624)
The upper limit of the output size is the default output size of
the respective algorithm variants.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22659)
Fixes#7894
This allows SHAKE to squeeze multiple times with different output sizes.
The existing EVP_DigestFinalXOF() API has been left as a one shot
operation. A similar interface is used by another toolkit.
The low level SHA3_Squeeze() function needed to change slightly so
that it can handle multiple squeezes. This involves changing the
assembler code so that it passes a boolean to indicate whether
the Keccak function should be called on entry.
At the provider level, the squeeze is buffered, so that it only requests
a multiple of the blocksize when SHA3_Squeeze() is called. On the first
call the value is zero, on subsequent calls the value passed is 1.
This PR is derived from the excellent work done by @nmathewson in
https://github.com/openssl/openssl/pull/7921
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21511)
quic_multistream test was issuing a signal on a condvar after dropping
the corresponding mutex, not before, leading to potential race
conditions in the reading of the associated data
Fixes#22588
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22616)
This avoids code duplication and provides variable-size support
for BLAKE2s like 786b9a8
Test data obtained with libb2 with the following programs:
==> b2.c <==
#include <blake2.h>
#include <unistd.h>
int main() {
char buf[16] = {};
blake2s(buf, 0, 0, 16, 0, 0);
write(1, buf, 16);
}
==> b3.c <==
#include <blake2.h>
#include <unistd.h>
int main() {
char buf[10] = {};
blake2s(buf, "\x61", 0, 10, 1, 0);
write(1, buf, 10);
}
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22444)
Fixes Coverity 1548382
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22606)
ossl_quic_sstream_is_totally_acked would return 0
if no data had been appended to the stream yet.
Fixed and added tests.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22580)
Although the previous commit is enough to fix the immediate cause of the
stochastic failure on Windows, this is a more resilient fix; make sure
we only inject a given frame into the correct packet type for our
various injection functions.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22578)
The QUIC fault injector frame injection functionality injects injected
frames on whatever EL we happen to be using to generate a packet in.
This means we sometimes inject the frame into a packet type it is not
allowed to be in, causing a different error code to be generated.
Fix this by making sure the connection is fully established before
trying to generate the frame in question.
Fixes#22348.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22578)
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22499)
In digest_test_run() there are now 3 parameters possible plus
the sentinel value. In reality we will never use all three
at once but Coverity rightfully complains that it is possible
to overflow the params array.
Fixes Coverity 1548054
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22521)
To enhance test coverage for AES-ECB mode, we provided longer additional
testing patterns for AES-128/192/256-ECB.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
To enhance test coverage for AES-XTS mode, we provided longer additional
testing patterns from BoringSSL for AES-XTS testing.
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
To enhance test coverage for AES-GCM mode, we provided longer additional
testing patterns for AES-GCM testing.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
To enhance test coverage for AES-CBC mode, we provided longer additional
test patterns for AES-CBC testing.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
While RFC 5705 implies that the maximum length of context for
exporters to be 65535 bytes as the length is embedded in uint16, the
current implementation enforces much smaller limit, which is less than
1024 bytes. This removes the restriction by dynamically allocating
memory.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22465)
Test case amended from code initially written by Bernd Edlinger.
Fixes#21110
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22421)
BLAKE2 is not really an extensible output function unlike SHAKE
as the digest size must be set during the context initialization.
Thus it makes no sense to use OSSL_DIGEST_PARAM_XOFLEN.
We also need to adjust EVP_DigestFinal_ex() to query the
OSSL_DIGEST_PARAM_SIZE as gettable ctx param for the size.
Fixes#22488
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22491)
ACKs are not restricted by CC so do not consider CC when determining
when we will emit an ACK.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22476)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22485)
In case the connection close error code is unexpected
print out the reason to help with diagnostics.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22474)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22500)
There were intermitten failures on the test occasionally and
1s initial limit might be too short.
Fixes#22424
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22475)
The code did not yet check that the length of the RSA key is positive
and even.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22403)
If a URXE cannot be processed yet then we add it to the urx_deferred list.
Later, when they can be processed, we requeue them in the urx_pending list.
We must not reverse the order when doing so. We want to process the URXEs
in the order that they were received.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22452)
Add a test for the recently added function OSSL_ERR_STATE_save_to_mark().
We can just modify the existing test_save_restore() to add this in.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
Creating JDK compatible pkcs12 files requires a bit more than just
adding the Trusted Key Usage OID to a certbag in the pkcs12 file.
Additionally the JDK currently requires that pkcs12 files setting this
oid _not_ contain any additional keys, and in response will produce
unpredictable results.
This could be solved by implying --nokeys when the pkcs12 utility is run
and the config option is set, but thatcould confuse users who didn't
specify nokeys on the command line. As such, remove the config file
setting for this feature, and replace it with a -jdktrust command line
option, that is documented to assert nokeys when a users specifies the
new command line option.
Fixes#22215
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22422)
Return SSL_SENT_SHUTDOWN and SSL_RECEIVED_SHUTDOWN with semantics
similar to TLS connections.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22408)
Fixes#22225
In OBJ_nid2obj(), if the NID does not have an OID, then a pointer to
the special "undefined" ASN1_OBJECT is returned. Check for the
undefined-ASN1_OBJECT and return an error. Also, add a test for this
in 80-test_cms.t.
Testing:
#!/bin/bash -x
shopt -s expand_aliases
alias openssl="LD_LIBRARY_PATH=~/git/openssl ~/git/openssl/apps/openssl"
echo "This is a confidential message. It should be encrypted." > msg.txt
## this should fail b/c there is no OID for aes-256-ctr
openssl cms -encrypt -in msg.txt -aes-256-ctr -out msg.txt.cms -recip demos/cms/signer.pem
echo $?
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22392)
According to the manual page, EVP_PKEY_CTX_set0_rsa_oaep_label()
should accept NULL as the label argument, though the function
currently rejects it while setting the corresponding octet string
parameter with OSSL_PARAM_construct_octet_string, which expects
non-NULL input. This adds a workaround to the caller for backward
compatibility.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22397)
problem reported by: 2ourc3
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22355)
The semantics of ossl_ffc_validate_public_key() and
ossl_ffc_validate_public_key_partial() needs to be changed
to not return error on non-fatal problems.
Fixes#22287
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22291)
The lower priority 'and' seems to have some "interesting" interactions with
function argument parsing in some perl versions (presumably because 'and' is
lower priority than the comma).
For the lines that are changed here, perl v5.20.1 says this:
Useless use of string eq in void context at [.test.recipes]05-test_rand.t line 33.
Useless use of numeric eq (==) in void context at [.test.recipes]05-test_rand.t line 39.
Replacing 'and' with '&&' in these two cases fixes the problem.
Replacing
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22331)
The BIO_addr test is failing on non-stop. The length of the data is larger
than the size we have allocated for it. We dynamically allocate instead.
Fixes#22218
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22294)
When running the tserver test we bail out if a timeout expires. We
shouldn't use fake time for that timeout, because fake time might never
actually get incremented.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22284)
If we wait for 100ms 600 times - then the test takes a minute to complete
which is far too long. The purpose of the wait is to give the assistance
thread a chance to catch up. We only do that if the event timeout has
actually expired - otherwise we are waiting for no reason.
Fixes#22156
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22284)
The test server cannot really cope with modifications
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22267)
A new type of noise is introduced in the noisy dgram bio
filter.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22267)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22281)
ossl_property_list_to_string() didn't quote strings correctly which
could result in a generated property string being unparsable.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22182)
This commit adds `test_EVP_PKEY_sign_with_app_method`, a regression
test for the bug fix in commit 1acc3e8cc3 (pull request #22163).
It is analogous to `test_EVP_PKEY_sign`, only with a fake app method
based key. (The EC key test case was omitted, because there is no
`EC_KEY_METHOD_dup` method.)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22185)
If either endpoint issues a PING frame while we are introducing noise
into the communication then there is a danger that the connection itself
will fail. We detect the PING and then back off on generating noise for a
short while. It should be sufficient to just ensure that the next datagram
does not get dropped for each endpoint.
Fixes#22199
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22243)
To improve Coverage mapping in Coveralls make it
possible to run test_ssl_trace() with enable-zlib
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22222)
Script 13 is a stress test which can timeout on some low powered platforms
or with some options that significantly slow performance.
We increase the timeout.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22214)
Signed-off-by: Mathieu Tortuyaux <mathieu.tortuyaux@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22147)
Ensure we use OPENSSL_NO_SSL_TRACE guards where appropriate.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22193)
Fixes: #22178
Signed-of-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22179)
Until the cipher dupctx is properly implemented in 3.1 and 3.0 the check is
wrong. This should be reverted once the implemenation has been done.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
Signed-off-by: Jonathan M. Wilbur <jonathan@wilbur.space>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21342)
We also add a test for BIO_ADDR_dup() which was also added in 3.2
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22164)
We now have a public function for BIO_ADDR_copy() which can be used in
preference to the test code's private implementation.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22164)
The previous terminology was quite confusing. We try to use drop, duplicate
and delay more consistently and introduce the "reinject" terminology as a
mechanism for implementing duplicates and delays.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
An application may pass in a whole BIO chain via SSL_set_bio(). When we
free the BIO we should be using BIO_free_all() not BIO_free() like we do
with TLS.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
We are actually passing two references to sbio: one as part of a BIO chain
and one stand alone. Therefore we need two references.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
So far we've only applied noise to the server to client datagrams. Do the
same thing the other way around.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
We add a new flag QTEST_FLAG_CLIENT_TRACE to get debug tracing output if
required.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
Where multiple packets are in a single datagram we split them so that all
packets can be affected by the noise
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
Provide a BIO filter that can split QUIC datagrams containing multiple
packets, such that each packet is in its own datagram.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
Now that we have a noisy datagram BIO we cannot rely on datagrams always
reliably being delivered in the test framework. We need to start taking
notice of timeouts and handling them appropriately.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
We drop some datagrams, and we delay some datagrams. We can also duplicate
some datagrams.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
We send several messages between client and server, and server and client,
and also create a new stream.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
Create a noisy dgram test that can drop/duplicate/reorder UDP packets and
ensure that the QUIC connection is tolerant of this. At this stage we just
create the outline of the test. Adding in the noise will come in future
commits.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
Numerous tests use the test_random() function to get a random number. If a
test fails then the seed that was used for the test RNG is displayed.
Setting the seed to the same value in a future run is supposed to cause the
same random numbers to be generated again.
The way to set the RNG seed again is to use the `OPENSSL_TEST_RAND_ORDER`
environment variable. However setting this environment variable *also*
randomises the test ordering as well as seeding the RNG. This in itself
calls test_random() so, in fact, when the test finally runs it gets
different random numbers to when it originally run (defeating the
repeatability objective).
This means that only way repeatability can be obtained is if the test was
originally run with `OPENSSL_TEST_RAND_ORDER` set to 0. If that wasn't done
then the seed printed when the test failed is not useful.
We introduce a new environment variable `OPENSSL_TEST_RAND_SEED` which can
be used to independently seed the test RNG without randomising the test
ordering. This can be used to get repeatability in cases where test ordering
randomisation was not done in the first place.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22118)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20131)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22098)
If we ignore the faliure to copy on an old fips provider, we need to use
ctx_base, rather than ctx
Fixes#22076
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22102)
Prefer friendly name passed by the caller and calculated local
key id to ones found in certificate auxiliary data when creating
PKCS#12.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21675)
OSSL_sleep(1) isn't enough of a wait for threads to process the next QUIC
tick, so it gets increased to OSSL_sleep(100). This may be a tad much,
perhaps, but for now, it gives a good margin.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22075)
This fixes a few memory leaks reported in #22049.
If SSL_CTX_set0_tmp_dh_pkey rejects the temp dh key
due to security restrictions (even when @SECLEVEL=0 is used!)
then the caller has to delete the PKEY object.
That is different to how the deprecated
SSL_CTX_set_tmp_dh_pkey was designed to work.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22060)
When setting an explicit buffer size using BIO_s_dgram_mem() make sure we
take into account the size of the header (which may be large on NonStop)
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22058)
The size of the datagram header is significantly larger that we might
expect on NonStop (probably driven by sizeof(BIO_ADDR)). We adjust the
size of the default buffer to take into account the header size and the
mtu.
Fixes#22013
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22058)
ALPN is a requirement for QUIC so it is an error if the server does not
send it.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22066)
There should be no reason that a cipher can't be duplicated
Fixes#21887
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21933)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22011)
Check that we can set and use a PSK when establishing a QUIC connection.
Fixesopenssl/project#83
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22011)
That seems to be only an issue for RSA-PSS with parameters.
Spotted by code review, so it looks like there is no test coverage for this.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22032)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
The server port was hard coded to 8186. That could make for some
"interesting" effects if two instances of this same test was running
on the same machine.
This change binds the server interface with port 0, and captures the
resulting random port.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22025)
If there is an issue with setting up the test environment in this test,
pid is not set so stop_server kills the perl process. A guard has been
added to prevent this situation.
Fixes: #22014
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22015)
when used in conjunction with -out and -modulus options.
Fixes#21403
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22026)
Because apps/lib/http_server.c had a hard coded "[::]" for the accept host,
80-test_cmp_http.t assumed that it would always get a CMP server on an IPv6
address, and tested for that.
With the fix in apps/lib/http_server.c, that test was of course doomed to
fail. Since CMP should be about IP version testing, 80-test_cmp_http.t is
adapted to allow the Mock server to accept connections on either IP version,
and the test for IPv6 is removed.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21989)
Fixes#21977
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21978)
The test encrypted RSA key with DES3 which is still
allowed in the 3.0 fips provider.
Instead use the traditional key format that uses MD5
to create the password based key. MD5 is disallowed
in the 3.0 fips provider.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/21957)
Other similar macros can be implemented later. Right now, this are the most
likely to be actually useful
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21951)
This allows PBKDF2 to change the saltlen to something other than the
new default value of 16. Previously this app hardwired the salt length
to a maximum of 8 bytes. Non PBKDF2 mode uses EVP_BytesToKey()
internally, which is documented to only allow 8 bytes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21858)
The PKCS5 (RFC 8018) standard uses a 64 bit salt length for PBE, and
recommends a minimum of 64 bits for PBES2. For FIPS compliance PBKDF2
requires a salt length of 128 bits.
This affects OpenSSL command line applications such as "genrsa" and "pkcs8"
and API's such as PEM_write_bio_PrivateKey() that are reliant on the
default salt length.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21858)
Test that errors such as SSL_ERROR_WANT_RETRY_VERIFY are properly
handled by QUIC connections.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21922)
It add supports for verifying that it's been signed by a CA, and
checks the CRL and OCSP status
Can find CVE-2022-4203 and CVE-2023-0286
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20243)
The command line option enables setting in-place
data processing for cipher testing in `evp_test`.
The `both` option argument runs both - in-place
and non-in-place testing.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/21546)
Recently the Coveralls CI run started failing
because it times out in this test.
Outside of Coveralls it runs fine so assuming that
this is caused by slow execution under Coveralls.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21844)
This is used to calculate the TSA's public key certificate identifier.
The default algorithm is changed from sha1 to sha256.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21794)
If we have enough data for more than one datagram then we should send more
than one datagram
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21798)
If we've got more data to send than will fit in a single datagram we should
keep generating those datagrams until we've sent it all.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21798)
Controls 'rsa_keygen_pubexp' and 'rsa_keygen_primes' should also be allowed
for RSA-PSS keys.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21818)
We change the client TLS handshake keys as late as possible so that we
don't disturb the keys if we are writing early data. However for QUIC we
want to do this as early as possible (after ServerHello). Since we will
never do TLS early data with QUIC we just do it as early as possible if
early data is not being used.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21810)
Even in case of later failure we need to flush
the previous packets.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21700)
And use QTEST_FLAG_FAKE_TIME with test_ssl_trace().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21713)
Also adds saving the new trace to ssltraceref-new.txt in
test-runs which can be handy when the trace changes and
needs to be updated.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21713)
Fixes#21198
decoder objects were setting propq as NULL.
Added a set_ctx/settable_ctx to all decoders that should supply
a property query parameter to internal functions.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21219)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21033)
This should result in a QUIC PROTOCOL_VIOLATION
We also add tests for a post-handshake KeyUpdate, and a NewSessionTicket
with an invalid max_early_data value.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21686)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21722)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21722)
as both algorithms are really needed.
Fixes#21625
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21677)
Fixes#21624
With OPENSSL_NO_POSIX_IO or OPENSSL_NO_SOCK the function
wait_until_sock_readable() currently does not exist.
Define empty wait_until_sock_readable() when building
with no-posix-io.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21677)
This happens if this function is called for signed content.
Added ossl_cms_env_enc_content_free() for cleaning enveloped content.
Fixed indentation in ossl_cms_env_enc_content_free
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21676)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21519)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21579)
We add an additional loop around test_quic_write_read() to repeat the
test but using a session obtained from the initial iteration to confirm
that we can successfully resume the session.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21591)
Check that if one endpoint is sending data faster than its peer can handle
then we eventually see back pressure.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21368)
We must not ask for a password when attempting to read parameters.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21603)
This must fail with DH_CHECK_INVALID_Q_VALUE and
with DH_CHECK_Q_NOT_PRIME unset.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21550)
When an early error happens in the test_pipelining
function and idx == 5 the error handling would try
to call OPENSSL_free(msg), but msg is at that time
just a string constant in read-only memory, so a
crash would be the result. Fixed that by using
fragsize as an indication when to free msg.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21512)
Matt Caswell
Bernd Edlinger
Neil Horman
Hugo Landau
Richard Levitte
olszomal
Markus Minichmayr
James Muir
Viktor Dukhovni
наб
Tomas Mraz
slontis
Veronika Hanulíková
Pauli
Stephen Farrell
Phoebe Chen
Daiki Ueno
Todd Short
Clemens Lang
Dr. David von Oheimb
Vladimir Kotal
Matthias St. Pierre
Mathieu Tortuyaux
Randall S. Becker
Jonathan M. Wilbur
Michael Baentsch
Steffen Klee
Simo Sorce
Dimitri Papadopoulos
Olga Batyshkina
Dmitry Belyavskiy
Min Zhou
Dr. David von Oheimb
Kurt Roeckx
Ingo Franzki