Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18809)
This PR is based off the contributions in PR #9223 by Jemmy1228.
It has been modified and reworked to:
(1) Work with providers
(2) Support ECDSA and DSA
(3) Add a KDF HMAC_DRBG implementation that shares code with the RAND HMAC_DRBG.
A nonce_type is passed around inside the Signing API's, in order to support any
future deterministic algorithms.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18809)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19201)
Also fix a number of regressions when run against the 3.0.0 FIPS provider
that result from bug fixes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19201)
Increase the signature's length, that is passed to EVP_DigestSign(). The
implementation should set this parameter back to the actual length, that
has been written.
This (oneshot_digestsign_test_run()) fails for the ed25519/ ed448
implementation of s390 prio the fix. The change in digestsign_test_run()
follows the same pattern and is for collecting bonus points.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/18928)
Fixes#16721
This uses AES-ECB to create a counter mode AES-CTR32 (32bit counter, I could
not get AES-CTR to work as-is), and GHASH to implement POLYVAL. Optimally,
there would be separate polyval assembly implementation(s), but the only one
I could find (and it was SSE2 x86_64 code) was not Apache 2.0 licensed.
This implementation lives only in the default provider; there is no legacy
implementation.
The code offered in #16721 is not used; that implementation sits on top of
OpenSSL, this one is embedded inside OpenSSL.
Full test vectors from RFC8452 are included, except the 0 length plaintext;
that is not supported; and I'm not sure it's worthwhile to do so.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18693)
Fixes test error in #18714
This only happens currently during minimal builds.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18737)
As the potential failure of the OPENSSL_strdup(),
it should be better to check the return value and
return error if fails.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18592)
EVP_PKEY_derive() should be able to cope with a too big buffer for fixed
size outputs. However, we don't test that.
This change modifies the PKEYKDF tests to ask EVP_PKEY_derive() what the
desired output buffer size is, and as long as the returned value isn't
absurd (indicating that anything goes), the output buffer is made to be
twice as big as what is expected.
Tests #18517
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18533)
(cherry picked from commit a0587aaeff)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18368)
Since the memory allocation may fail, the 'mac_name' and 'controls'
could be NULL.
And the 'mac_name' will be printed in mac_test_run_mac() without check.
Also the result of 'params_n +
sk_OPENSSL_STRING_num(expected->controls)' in
mac_test_run_mac() will be 'params_n - 1' if allocation fails , which
does not make sense.
Therefore, it should be better to check them in order to guarantee the
complete success of initiation.
If fails, we also need to free the 'mdat' to avoid the memory leak.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17628)
Including e_os.h with a path from a header file doesn't work well on
certain exotic platform. It simply fails to build.
Since we don't seem to be able to stop ourselves, the better move is
to move e_os.h to an include directory that's part of the inclusion
path given to the compiler.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17641)
The OPENSSL_zalloc() could return NULL pointer if fails.
Add the check for it does make sense, like how digest_test_init() deals
with.
CLA: trivial
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17571)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16918)
This test did not really execute, since usually
the OPENSSL_malloc(0) will fail and prevent the
execution of the KDF.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16444)
If we have an unsupported key type we may get a decode error and
therefore we should detect that.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15504)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Change:
EVP_RAND_gettable_ctx_params -> EVP_RAND_CTX_gettable_params
EVP_RAND_settable_ctx_params -> EVP_RAND_CTX_settable_params
Which brings them in line with the other similar functions for other algorithm
types.
Fixes#14880
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14893)
Fixes#14808
Validation checks were moved into EVP_PKEY_derive_set_peer() which broke
an external negative test. Originally the old code was semi working by checking the peers public key was in the range of other parties p. It was not actually ever
checking that the domain parameters were consistent between the 2
parties. It now checks the parameters match as well as validating the
peers public key.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14823)
Fixes#14401
Note that this moves the public key check out of DH compute_key() since
key validation does not belong inside this primitive..
The check has been moved to the EVP_PKEY_derive_set_peer() function so that
it generally applies to all exchange operations.. Use EVP_PKEY_derive_set_peer_ex()
to disable this behaviour.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14717)
A trivial PR to remove some commonly repeated words. It looks like this is
not the first PR to do this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14420)
EVP_KEY_new_CMAC_key_ex was in the pre-release 3.0 only, so is safe
to remove.
Restore 1.1.1 version of EVP_PKEY_new_CMAC_key documentation.
Also make testing of EVP_PKEY_new_CMAC_key properly #ifdef'd.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13829)
To clarify the purpose of these two calls rename them to
EVP_CIPHER_CTX_get_original_iv and EVP_CIPHER_CTX_get_updated_iv.
Also rename the OSSL_CIPHER_PARAM_IV_STATE to OSSL_CIPHER_PARAM_UPDATED_IV
to better align with the function name.
Fixes#13411
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13870)
The configuration option 'no-rsa' was dropped with OpenSSL 1.1.0, so
this is simply a cleanup of the remains.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13700)
The X942 KDF had been modified so that it supports all optional fields - not
just the fields used by CMS.
As there are 2 types of KDF for X942 - this has been made a bit clearer
by adding an X942KDF-ASN1 alias. X942KDF-CONCAT has also been added as an
alias of X963KDF.
This work was instigated as a result of the ACVP tests optionally being
able to use keybits for the supp_pubinfo field.
Setting the parameter OSSL_KDF_PARAM_X942_USE_KEYBITS to 0 allows this
to be disabled.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13418)
Fixes#12627
Changed security check for DSA verification to match SP800-131Ar2 when
the security strength is < 112.
Fixed compilation error when using config opt 'no-fips-securitychecks'
Removed TODO's from 20-test_cli_fips.t - there is no longer an TODO error.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13387)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Automatically rename all instances of _with_libctx() to _ex() as per
our coding style.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
Instead of sometimes, and sometimes not reporting an error in the
caller of EVP_XXX_fetch(), where the error may or may not be very
accurate, it's now centralised to the inner EVP fetch functionality.
It's made in such a way that it can determine if an error occured
because the algorithm in question is not there, or if something else
went wrong, and will report EVP_R_UNSUPPORTED_ALGORITHM for the
former, and EVP_R_FETCH_FAILED for the latter.
This helps our own test/evp_test.c when it tries to figure out why an
EVP_PKEY it tried to load failed to do so.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12857)
In EC_GROUP_new_from_params(), ERR_R_EC_LIB was reported if
group_new_from_name() returned NULL. However, this shadows a possible
EC_R_INVALID_CURVE, making that harder to detect, which happens to be
important to do in test/evp_test.c.
This also extends key_unsupported() in test/evp_test.c to check for
this error alongside the check for EC_R_UNKNOWN_GROUP.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12587)
key_unsupported() looked at the first error in the queue to see if a
key algorithm is supported or not. However, there are situations
where the errors it looks for is preceded by others. It's much safer
to look at the last recorded error.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12587)
The previous commits added support for HMAC, SIPHASH and Poly1305 into
the provider MAC bridge. We now extend that for CMAC too.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12637)
test/evp_test.c and test/sslapitest.c are affected. This allows them
to decode keys found in stanza files via provider decoder implementations
when a library context other than the default should be used.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12673)
We check that EVP_default_properties_is_fips_enabled() is working even
before other function calls have auto-loaded the config file.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12567)
Use EVP_CIPHER_CTX_get_iv_state() in cipher_test_enc() rather than
the deprecated EVP_CIPHER_CTX_iv().
[extended tests]
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12233)
Now that the EVP_PKEY KDF bridge is based on provider code a TODO item
can be removed from evp_test.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12573)
Changed many tests so they also test fips (and removed 'availablein = default' from some tests).
Seperated the monolithic evppkey.txt file into smaller maintainable groups.
Changed the availablein option so it must be first - this then skips the entire test before any fetching happens.
Changed the code so that all the OPENSSL_NO_XXXX tests are done in code via methods such as is_cipher_disabled(alg),
before the fetch happens.
Added missing libctx's found by adding a libctx to test_evp.
Broke up large data files for cipher, kdf's and mac's into smaller pieces so they no longer need 'AvailableIn = default'
Added missing algorithm aliases for cipher/digests to the providers.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12236)
The commit claimed to make things more consistent. In fact it makes it
less so. Revert back to the previous namig convention.
This reverts commit 765d04c946.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12186)
The commit claimed to make things more consistent. In fact it makes it
less so. Revert back to the previous namig convention.
This reverts commit d9c2fd51e2.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12186)
Added Algorithm names AES-128-CBC-CTS, AES-192-CBC-CTS and AES-256-CBC-CTS.
CS1, CS2 and CS3 variants are supported.
Only single shot updates are supported.
The cipher returns the mode EVP_CIPH_CBC_MODE (Internally it shares the aes_cbc cipher code). This
would allow existing code that uses AES_CBC to switch to the CTS variant without breaking code that
tests for this mode. Because it shares the aes_cbc code the cts128.c functions could not be used directly.
The cipher returns the flag EVP_CIPH_FLAG_CTS.
EVP_CIPH_FLAG_FIPS & EVP_CIPH_FLAG_NON_FIPS_ALLOW have been deprecated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12094)
functions are now EVP_MAC functions, usually with ctx in their names.
Before 3.0 is released, the names are mutable and this prevents more
inconsistencies being introduced.
There are no functional or code changes.
Just the renaming and a little reformatting.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11997)
The EVP_KDF_CTX_* functions have been relocated to the EVP_KDF_* namespace
for consistency.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11996)
If we failed to fetch an EVP_KEYMGMT then we were falling back to legacy.
This is because some algorithms (such as MACs and KDFs used via an old
style EVP_PKEY) have not been transferred to providers.
Unfortunately this means that you cannot stop some algorithms from being
used by not loading the provider.
For example if you wanted to prevent RSA from being used, you might expect
to just not load any providers that make it available. Unfortunately that
doesn't work because we simply fall back to legacy if we fail to fetch
the EVP_KEYMGMT.
Instead we should fail *unless* the key type is one of those legacy key
types that we have not transferred.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11826)
... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.
Deprecate stack-of-block
Better documentation
Move some ASN1 struct typedefs to types.h
Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)
There was a misunderstanding what it should return. It should return
0 on internal error, but 1 even if the thing it tests fails (the error
is determined by |t->err|).
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10289)
PR#6975 added the ability to our test framework to have common options to
all tests. For example providing the option "-test 5" to one of our test
programs will just run test number 5. This can be useful when debugging
tests.
Unforuntately this does not work well for a number of tests. In particular
those tests that call test_get_argument() without first skipping over these
common test options will not get the expected value. Some tests did this
correctly but a large number did not.
A helper function is introduced, test_skip_common_options(), to make this
easier for those tests which do not have their own specialised test option
handling, but yet still need to call test_get_argument(). This function
call is then added to all those tests that need it.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10975)
With test/ecdsatest.c, we test all the curves once for each EC key
type we have, i.e. one round trip with EVP_PKEY_EC and one with
EVP_PKEY_SM2. This shows that we can use "normal" EC computations on
keys with the SM2 curve (which have the type EVP_PKEY_SM2 by default)
and SM2 computations with any other curve (which have the type
EVP_PKEY_EC by default)
test/evp_test.c, on the other hand, doesn't need to explicitly set the
EVP_PKEY_SM2 alias type, as that now happens automatically.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10942)
One of the MDC2 test applications can be done using evp_test.
This makes it so.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10831)
Fixes#10438
issue found by clusterfuzz/ossfuzz
The dest was getting a copy of the src structure which contained a pointer that should point to an offset inside itself - because of the copy it was pointing to the original structure.
The setup for a ctx is mainly done by the initkey method in the PROV_CIPHER_HW structure. Because of this it makes sense that the structure should also contain a copyctx method that is use to resolve any pointers that need to be setup.
A dup_ctx has been added to the cipher_enc tests in evp_test. It does a dup after setup and then frees the original ctx. This detects any floating pointers in the duplicated context that were pointing back to the freed ctx.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10443)
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9949)
The following new functions all do the same thing; they traverse
the set of names assigned to implementations of each algorithm type:
EVP_MD_names_do_all(), EVP_CIPHER_names_do_all(),
EVP_MAC_names_do_all(), EVP_KEYMGMT_names_do_all(),
EVP_KEYEXCH_names_do_all(), EVP_KDF_names_do_all(),
EVP_SIGNATURE_names_do_all()
We add a warning to the documentation of EVP_CIPHER_name() and
EVP_MD_name(), as they aren't suitable to use with multiple-name
implementation.
We also remove EVP_MAC_name() and evp_KDF_name(), as they serve no
useful purpose.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9979)
All instances of EVP_*_CTX_gettable_params functions have been renamed
to EVP_*_gettable_ctx_params. Except for the EVP_MD ones which were changed
already.
These functions do not take EVP_*_CTX arguments so their prior naming was
misleading.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10052)
ERR_func_error_string() essentially returns NULL, and since all
function codes are now removed for all intents and purposes, this
function has fallen out of use and cannot be modified to suit the
data, since its only function is to interpret an error code.
To compensate for the loss of error code, we instead provide new
functions that extracts the function name strings from an error
record:
- ERR_get_error_func()
- ERR_peek_error_func()
- ERR_peek_last_error_func()
Similarly, the once all encompasing functions
ERR_peek_last_error_line_data(), ERR_peek_error_line_data() and
ERR_get_error_line_data() lack the capability of getting the function
name string, so we deprecate those and add these functions to replace
them:
- ERR_get_error_all()
- ERR_peek_error_all()
- ERR_peek_last_error_all()
Finally, we adjust a few lines of code that used the now deprecated
functions.
Fixes#9756
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9756)
slontis
Xu Yizhou
Tomas Mraz
Pauli
Sebastian Andrzej Siewior
Todd Short
Jiasheng Jiang
Richard Levitte
Peiwei Hu
Matt Caswell
Dmitry Belyavskiy
Patrick Uiterwijk
Dr. David von Oheimb
x2018
Bernd Edlinger
Jon Spillett
Pauli
Richard Levitte
Rich Salz
Tomas Mraz
Dr. Matthias St. Pierre
Benjamin Kaduk
Pauli
Simo Sorce