And add a note how to perform side-channel free error stack handling.
Signed-off-by: Hubert Kario <hkario@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24159)
(cherry picked from commit 9816127463)
Fix a typo from asymmmetric to asymmetric
CLA: trivial
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23164)
(cherry picked from commit cf8fea86f7)
If a name is passed to EVP_<OBJ>_fetch of the form:
name1:name2:name3
The names are parsed on the separator ':' and added to the store, but
during the lookup in inner_evp_generic_fetch, the subsequent search of
the store uses the full name1:name2:name3 string, which fails lookup,
and causes subsequent assertion failures in evp_method_id.
instead catch the failure in inner_evp_generic_fetch and return an error
code if the name_id against a colon separated list of names fails. This
provides a graceful error return path without asserts, and leaves room
for a future feature in which such formatted names can be parsed and
searched for iteratively
Add a simple test to verify that providing a colon separated name
results in an error indicating an invalid lookup.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/23110)
(cherry picked from commit 94be985cbc)
The EVP interface explicitly allows in-place encryption/decryption,
but this fact is just 'partially' documented in `EVP_EncryptUpdate(3)`
(pun intended): the manual page mentions only operation failure in
case of 'partial' overlaps. This is not even correct, because
the check for partially overlapping buffers is only implemented
in legacy code paths.
Currently, in-place encryption/decryption is only documented for
RSA (`RSA_public_encrypt(3)`) and DES (`DES_ecb_encrypt(3)`), as
well as in the provider interface (`provider-cipher(7)`).
This commit amends `EVP_EncryptUpdate(3)` and `provider-cipher(7)`
to make the front-end and back-end documentation consistent.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22875)
(cherry picked from commit 6ebdbba76a)
Do not allow mid-expression line breaks.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22814)
(cherry picked from commit 8da20b30da)
"d_i in RFC8017" -> "d_i" in RFC8017
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22868)
(cherry picked from commit c89b553bdc)
The macro for "block-size" is OSSL_MAC_PARAM_BLOCK_SIZE, and this
parameter is not settable. Refer to the "customization string" rather
than the "custom value" (in the Blake2 spec, this is called the
personalization string).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22763)
(cherry picked from commit 1750689767)
KECCAK-KMAC-128 and KECCAK-KMAC-256 are extendable output functions
that have been defined because they are convenient for implementing
KMAC. Give definitions for them so that users aren't left to figure
that out themselves. KECCAK-KMAC-128 is very similar to SHAKE-128,
and KECCAK-KMAC-256 is very similar to SHAKE-256.
Related to #22619.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22755)
(cherry picked from commit f1bea887ef)
Make the documentation match reality. Add lots of missing algorithms.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22694)
(cherry picked from commit ae14f38cc9)
Because the quicserver utility supports expressly listening in ipv4/6
mode, its possible/likely that the server will listen on an ipv4
address, while the clients will connect via ipv6, leading to connection
failures.
Augment quic demo clients to afford them the same -6 option that the
server has so that connection family can be co-ordinated
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22577)
(cherry picked from commit 5091aadc22)
The upper limit of the output size is the default output size
of the algorithm.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22661)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22636)
(cherry picked from commit 1c6a379754)
As per recommendation by jfinkhaeuser, this documents the defaults for
KMAC-128 as 32 and for KMAC-256 as 64. The code already accomodates for
these values, so no changes are needed there.
Fixes#22381
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22614)
(cherry picked from commit 56d1ab3b6c)
The demo code has changed to accept the hostname/port on the command line.
We update the tutorials to keep in sync with the demo code.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22552)
(cherry picked from commit 9e973eb297)
We move some of the "why QUIC" content into the guide and just provide a
summary in README-QUIC.md.
We also clarify how to use s_client with QUIC.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22505)
(cherry picked from commit 355fd1f45b)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22459)
(cherry picked from commit 0929814159)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22446)
(cherry picked from commit 62f8606a0a)
BLAKE2 is not really an extensible output function unlike SHAKE
as the digest size must be set during the context initialization.
Thus it makes no sense to use OSSL_DIGEST_PARAM_XOFLEN.
We also need to adjust EVP_DigestFinal_ex() to query the
OSSL_DIGEST_PARAM_SIZE as gettable ctx param for the size.
Fixes#22488
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22491)
The code for the quic demos (from the openssl guide) is presented as
modifications of tls-client-block.c. Make it so that the quic code
better matches the tls code (drop unneeded assignments to "ret", use
the same comment on SSL_connect(), add the same printf() statement).
Also fix some minor typos.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22483)
The `get_user_{entropy,nonce}` callbacks were add recently to the
dispatch table in commit 4cde7585ce. Instead of adding corresponding
`cleanup_user_{entropy,nonce}` callbacks, the `cleanup_{entropy,nonce}`
callbacks were reused. This can cause a problem in the case where the
seed source is replaced by a provider: the buffer gets allocated by
the provider but cleared by the core.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22423)
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20131)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22098)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22063)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21965)
Strictly speaking the previous code was still correct since BIO_set_fd
is tolerant of a NULL BIO. But this way is more clear.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21950)
A couple of the demos missed a call to this function in an error case.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21950)
Add additional commentary to the non-blocking examples explaining where to
add code to go and do other useful work.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21950)
We've added a new page to the guide so we should add a link to it.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21765)
We can use SSL_get_stream_read_state() to distinguish these cases.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21765)
Et7f3
Tomas Mraz
Hubert Kario
slontis
Richard Levitte
Neil Horman
Matt Caswell
James Muir
rilysh
Dimitri Papadopoulos
Dr. David von Oheimb
Matthias St. Pierre
Jamie Cui
Dmitry Belyavskiy
Michael Hinz
Pauli
Simo Sorce
Vladimir Kotal