Internally, we still need this function, so we make it internal and
then add a new ERR_get_state() that simply calls the internal variant,
unless it's "removed" by configuration.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9462)
ERR_func_error_string() essentially returns NULL, and since all
function codes are now removed for all intents and purposes, this
function has fallen out of use and cannot be modified to suit the
data, since its only function is to interpret an error code.
To compensate for the loss of error code, we instead provide new
functions that extracts the function name strings from an error
record:
- ERR_get_error_func()
- ERR_peek_error_func()
- ERR_peek_last_error_func()
Similarly, the once all encompasing functions
ERR_peek_last_error_line_data(), ERR_peek_error_line_data() and
ERR_get_error_line_data() lack the capability of getting the function
name string, so we deprecate those and add these functions to replace
them:
- ERR_get_error_all()
- ERR_peek_error_all()
- ERR_peek_last_error_all()
Finally, we adjust a few lines of code that used the now deprecated
functions.
Fixes#9756
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9756)
In ERR_add_error_vdata(), the size of err_data had 1 added to it in
some spots, which could lead to buffer overflow.
In ERR_vset_error(), ERR_MAX_DATA_SIZE was used instead of buf_size in
the BIO_vsnprintf() call, which would lead to a buffer overflow if
such a large buffer couldn't be allocated.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9491)
The useful inner macros are now static inline functions. That will
make them easier to debug in the future.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9452)
To deallocate the err_data field and then allocating it again might be
a waste of processing, but may also be a source of errors when memory
is scarce. While we normally tolerate that, the ERR sub-system is an
exception and we need to pay closer attention to how we handle memory.
This adds a new err_data flag, ERR_TXT_IGNORE, which means that even
if there is err_data memory allocated, its contents should be ignored.
Deallocation of the err_data field is much more selective, aand should
only happen when ERR_free_state() is called.
Fixes#9458
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9459)
Change SYSerr to have the function name; remove SYS_F_xxx defines
Add a test and documentation.
Use get_last_socket_err, which removes some ifdef's in OpenSSL code.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9072)
Deprecate all xxx_F_ defines.
Removed some places that tested for a specific function.
Use empty field for the function names in output.
Update documentation.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9058)
If a provider gets unloaded then any thread stop handlers that it had
registered will be left hanging. We should clean them up before tearing
down the provider.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9186)
The "add error data" functions now append to the current error.
Add a test for this.
Cleanup some of the ERR_put functions.
In the FIPS module, always append "(in the FIPS module)" to any errors.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9181)
The RAND code needs to know about threads stopping in order to cleanup
local thread data. Therefore we add a callback for libcrypto to tell
providers about such events.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
In later commits this will allow providers to subscribe to thread stop
events. We will need this in the FIPS module. We also make thread stop
handling OPENSSL_CTX aware (different OPENSSL_CTXs may have different
thread local data that needs cleaning up).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
The 4 kB SPACE_SYS_STR_REASONS in crypto/err/err.c isn't enough for some locales.
The Russian locales consume 6856 bytes, Ukrainian even 7000.
build_SYS_str_reasons() contains an overflow check:
if (cnt > sizeof(strerror_pool))
cnt = sizeof(strerror_pool);
But since commit 9f15e5b911 it no longer
works as cnt is incremented once more after the condition.
cnt greater than sizeof(strerror_pool) results in an unbounded
OPENSSL_strlcpy() in openssl_strerror_r(), eventually causing a crash.
When the first received error string was empty or contained only
spaces, cur would move in front of the start of the strerror_pool.
Also don't call openssl_strerror_r when the pool is full.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8966)
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712)
CMP and CRMF API is added to libcrypto, and the "cmp" app to the openssl CLI.
Adds extensive man pages and tests. Integration into build scripts.
Incremental pull request based on OpenSSL commit 1362190b1b of 2018-09-26
3rd chunk: CMP ASN.1 structures (in crypto/cmp/cmp_asn.c) and related files
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8669)
in INSTALL, Configure, crypto/build.info, include/openssl/crmferr.h,
crypto/err/, include/openssl/err.h, and (to be updated:) util/libcrypto.num
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7646)
If the call the ERR_set_error_data() in ERR_add_error_vdata() fails then
a mem leak can occur. This commit checks that we successfully added the
error data, and if not frees the buffer.
Fixes#8085
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/8105)
A CAdES Basic Electronic Signature (CAdES-BES) contains, among other
specifications, a collection of Signing Certificate reference attributes,
stored in the signedData ether as ESS signing-certificate or as
ESS signing-certificate-v2. These are described in detail in Section 5.7.2
of RFC 5126 - CMS Advanced Electronic Signatures (CAdES).
This patch adds support for adding ESS signing-certificate[-v2] attributes
to CMS signedData. Although it implements only a small part of the RFC, it
is sufficient many cases to enable the `openssl cms` app to create signatures
which comply with legal requirements of some European States (e.g Italy).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7893)
1. In addition to overriding the default application name,
one can now also override the configuration file name
and flags passed to CONF_modules_load_file().
2. By default we still keep going when configuration file
processing fails. But, applications that want to be strict
about initialization errors can now make explicit flag
choices via non-null OPENSSL_INIT_SETTINGS that omit the
CONF_MFLAGS_IGNORE_RETURN_CODES flag (which had so far been
both undocumented and unused).
3. In OPENSSL_init_ssl() do not request OPENSSL_INIT_LOAD_CONFIG
if the options already include OPENSSL_INIT_NO_LOAD_CONFIG.
4. Don't set up atexit() handlers when called with INIT_BASE_ONLY.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7986)
It turns out that intialization may change the error number, so we
need to preserve the system error number in functions where
initialization is called for.
These are ERR_get_state() and err_shelve_state()
Fixes#7897
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7902)
This function can end up being called during ERR_get_error() if we are
initialising. ERR_get_error() must preserve errno since it gets called via
SSL_get_error(). If that function returns SSL_ERROR_SYSCALL then you are
supposed to inspect errno.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7680)
Previously, the API version limit was indicated with a numeric version
number. This was "natural" in the pre-3.0.0 because the version was
this simple number.
With 3.0.0, the version is divided into three separate numbers, and
it's only the major number that counts, but we still need to be able
to support pre-3.0.0 version limits.
Therefore, we allow OPENSSL_API_COMPAT to be defined with a pre-3.0.0
style numeric version number or with a simple major number, i.e. can
be defined like this for any application:
-D OPENSSL_API_COMPAT=0x10100000L
-D OPENSSL_API_COMPAT=3
Since the pre-3.0.0 numerical version numbers are high, it's easy to
distinguish between a simple major number and a pre-3.0.0 numerical
version number and to thereby support both forms at the same time.
Internally, we define the following macros depending on the value of
OPENSSL_API_COMPAT:
OPENSSL_API_0_9_8
OPENSSL_API_1_0_0
OPENSSL_API_1_1_0
OPENSSL_API_3
They indicate that functions marked for deprecation in the
corresponding major release shall not be built if defined.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7724)
Expected usage pattern is to unconditionally set error and then
wipe it if there was no actual error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
It turns out that on VMS, strerror() returns messages with added
spaces at the end.
We wouldn't had noticed if it wasn't for perl trimming those spaces
off for its own sake and thereby having test/recipes/02-test_errstr.t
fail on VMS.
The safe fix is to do the same trimming ourselves.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7701)
We stored copies of the system error texts in a fixed line size array,
which is a huge waste. Instead, use a static memory pool and pack all
the string in there. The wasted space at the end, if any, gives us
some leeway for longer strings than we have measured so far.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7681)
This removes some code because we cannot trace the original contributor
to get their agreement for the licence change (original commit e03ddfae).
After this change there will be numerous failures in the test cases until
someone rewrites the missing code.
All *_free functions should accept a NULL parameter. After this change
the following *_free functions will fail if a NULL parameter is passed:
BIO_ACCEPT_free()
BIO_CONNECT_free()
BN_BLINDING_free()
BN_CTX_free()
BN_MONT_CTX_free()
BN_RECP_CTX_free()
BUF_MEM_free()
COMP_CTX_free()
ERR_STATE_free()
TXT_DB_free()
X509_STORE_free()
ssl3_free()
ssl_cert_free()
SSL_SESSION_free()
SSL_free()
[skip ci]
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5757)
Retain open file handle and previous stat data for the CA index
file, enabling detection and index reload (upcoming commit).
Check requirements before entering accept loop.
Reviewed-by: Matt Caswell <matt@openssl.org>
Conceptually, this is a squashed version of:
Revert "Address feedback"
This reverts commit 75551e07bd.
and
Revert "Add CRYPTO_thread_glock_new"
This reverts commit ed6b2c7938.
But there were some intervening commits that made neither revert apply
cleanly, so instead do it all as one shot.
The crypto global locks were an attempt to cope with the awkward
POSIX semantics for pthread_atfork(); its documentation (the "RATIONALE"
section) indicates that the expected usage is to have the prefork handler
lock all "global" locks, and the parent and child handlers release those
locks, to ensure that forking happens with a consistent (lock) state.
However, the set of functions available in the child process is limited
to async-signal-safe functions, and pthread_mutex_unlock() is not on
the list of async-signal-safe functions! The only synchronization
primitives that are async-signal-safe are the semaphore primitives,
which are not really appropriate for general-purpose usage.
However, the state consistency problem that the global locks were
attempting to solve is not actually a serious problem, particularly for
OpenSSL. That is, we can consider four cases of forking application
that might use OpenSSL:
(1) Single-threaded, does not call into OpenSSL in the child (e.g.,
the child calls exec() immediately)
For this class of process, no locking is needed at all, since there is
only ever a single thread of execution and the only reentrancy is due to
signal handlers (which are themselves limited to async-signal-safe
operation and should not be doing much work at all).
(2) Single-threaded, calls into OpenSSL after fork()
The application must ensure that it does not fork() with an unexpected
lock held (that is, one that would get unlocked in the parent but
accidentally remain locked in the child and cause deadlock). Since
OpenSSL does not expose any of its internal locks to the application
and the application is single-threaded, the OpenSSL internal locks
will be unlocked for the fork(), and the state will be consistent.
(OpenSSL will need to reseed its PRNG in the child, but that is
an orthogonal issue.) If the application makes use of locks from
libcrypto, proper handling for those locks is the responsibility of
the application, as for any other locking primitive that is available
for application programming.
(3) Multi-threaded, does not call into OpenSSL after fork()
As for (1), the OpenSSL state is only relevant in the parent, so
no particular fork()-related handling is needed. The internal locks
are relevant, but there is no interaction with the child to consider.
(4) Multi-threaded, calls into OpenSSL after fork()
This is the case where the pthread_atfork() hooks to ensure that all
global locks are in a known state across fork() would come into play,
per the above discussion. However, these "calls into OpenSSL after
fork()" are still subject to the restriction to async-signal-safe
functions. Since OpenSSL uses all sorts of locking and libc functions
that are not on the list of safe functions (e.g., malloc()), this
case is not currently usable and is unlikely to ever be usable,
independently of the locking situation. So, there is no need to
go through contortions to attempt to support this case in the one small
area of locking interaction with fork().
In light of the above analysis (thanks @davidben and @achernya), go
back to the simpler implementation that does not need to distinguish
"library-global" locks or to have complicated atfork handling for locks.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5089)
If OPENSSL_init_crypto() hasn't been called yet when ERR_get_state()
is called, it need to be called early, so the base initialization is
done. On some platforms (those who support DSO functionality and
don't define OPENSSL_USE_NODELETE), that includes a call of
ERR_set_mark(), which calls this function again.
Furthermore, we know that ossl_init_thread_start(), which is called
later in ERR_get_state(), calls OPENSSL_init_crypto(0, NULL), except
that's too late.
Here's what happens without an early call of OPENSSL_init_crypto():
=> ERR_get_state():
=> CRYPTO_THREAD_get_local():
<= NULL;
# no state is found, so it gets allocated.
=> ossl_init_thread_start():
=> OPENSSL_init_crypto():
# Here, base_inited is set to 1
# before ERR_set_mark() call
=> ERR_set_mark():
=> ERR_get_state():
=> CRYPTO_THREAD_get_local():
<= NULL;
# no state is found, so it gets allocated!!!!!
=> ossl_init_thread_start():
=> OPENSSL_init_crypto():
# base_inited is 1,
# so no more init to be done
<= 1
<=
=> CRYPTO_thread_set_local():
<=
<=
<=
<= 1
<=
=> CRYPTO_thread_set_local() # previous value removed!
<=
Result: double allocation, and we have a leak.
By calling the base OPENSSL_init_crypto() early, we get this instead:
=> ERR_get_state():
=> OPENSSL_init_crypto():
# Here, base_inited is set to 1
# before ERR_set_mark() call
=> ERR_set_mark():
=> ERR_get_state():
=> OPENSSL_init_crypto():
# base_inited is 1,
# so no more init to be done
<= 1
=> CRYPTO_THREAD_get_local():
<= NULL;
# no state is found, so it gets allocated
# let's assume we got 0xDEADBEEF
=> ossl_init_thread_start():
=> OPENSSL_init_crypto():
# base_inited is 1,
# so no more init to be done
<= 1
<= 1
=> CRYPTO_thread_set_local():
<=
<=
<=
<= 1
=> CRYPTO_THREAD_get_local():
<= 0xDEADBEEF
<= 0xDEADBEEF
Result: no leak.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4913)
Expression '...' is always true.
The 'b->init' variable is assigned values twice successively
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4753)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
Rewrite the -req-nodes flag from CA.pl (idea from Andy)
Rewrite ERR_string_error_n
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4478)
Rich Salz
Richard Levitte
Pauli
Dr. David von Oheimb
Matt Caswell
Vitezslav Cizek
Andreas Kretschmer
Bernd Edlinger
Antonio Iacono
Viktor Dukhovni
Andy Polyakov
Rich Salz
Jack Lloyd
Benjamin Kaduk
FdaSilvaYY
KaoruToda