Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22569)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22569)
We calculate the delay from the point that a packet arrives until it will
be counted as lost based on rtt info. Looking at all the packets we can
then calculate the earliest time that a packet will be counted as lost.
When that timer fires the latest rtt info may have changed and therefore
the packet may no longer be counted as lost yet.
We should not assume that just because the ackm timeout has fired that
there will definitely be lost packets.
Fixes#22538
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22541)
While RFC 5705 implies that the maximum length of context for
exporters to be 65535 bytes as the length is embedded in uint16, the
current implementation enforces much smaller limit, which is less than
1024 bytes. This removes the restriction by dynamically allocating
memory.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22465)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22470)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22470)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22470)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22470)
ACKs are not restricted by CC so do not consider CC when determining
when we will emit an ACK.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22476)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22485)
If a retry occurs we need to reset s->rlayer.wnum so that next time around
we remember how much data we already sent.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22473)
If a URXE cannot be processed yet then we add it to the urx_deferred list.
Later, when they can be processed, we requeue them in the urx_pending list.
We must not reverse the order when doing so. We want to process the URXEs
in the order that they were received.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22452)
We need to call quic_free() to free the record layer to ensure than any
BIO that was already set is also freed.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
When calling qrx_relocate_buffer, both the rxe and the pointer to the token
may be changing locations. We have to use a temporary copy of the token
pointer to avoid referencing the old location of the rxe.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
We ignore such a bad signature when fuzzing - it will never be correct.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
We accept a bad original destination connection id in the transport params
while we are fuzzing since this may change every time.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
Return SSL_SENT_SHUTDOWN and SSL_RECEIVED_SHUTDOWN with semantics
similar to TLS connections.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22408)
The one in ch_rx_handle_packet() is a tuning thing -> QUIC FUTURE
The one in ossl_quic_tserver_shutdown() is a server thing -> QUIC SERVER
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22408)
RFC 9000 s 17.2.5.2 says
> After the client has received and processed an Initial or Retry packet
> from the server, it MUST discard any subsequent Retry packets that it
> receives.
We were checking for multiple Retry packets, but not if we had already
processed an Initial packet.
Fixes the assertion failure noted in
https://github.com/openssl/openssl/pull/22368#issuecomment-1765618884
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22411)
Although many of the QUIC tests use fake time, the time we pass to the
ossl_crypto_condvar_wait_timeout() must be a real time.
Passing fake time was causing the QUIC tserver test to hang because
ossl_crypto_convar_wait_timeout() always timed out immediately and never
relinquished the CPU.
If using fake time we adjust the time to real time just before using it.
Fixes#22020
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22301)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22238)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22174)
An application may pass in a whole BIO chain via SSL_set_bio(). When we
free the BIO we should be using BIO_free_all() not BIO_free() like we do
with TLS.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)
This commit introduces two key improvements:
1. Improve code safety by replacing the conditional statement with
`if (n >= size)` and using OPENSSL_strnlen() instead of strlen().
This change ensures proper buffer size handling and adheres to
secure coding practices.
2. Enhance code readability by substituting `strcpy(p, c->name)` with
`memcpy(p, c->name, n)`. This adjustment prioritizes code clarity and
maintenance, even while mitigating a minimal buffer overflow risk.
These enhancements bolster the code's robustness and comprehensibility,
aligning with secure coding principles and best practices.
Fixes#19837
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21934)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22098)
TLS misconfiguration errors should be shown to the application to enable
diagnosis of the problem. Otherwise you just get a generical "internal
error" message.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22066)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22063)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22011)
Check that we can set and use a PSK when establishing a QUIC connection.
Fixesopenssl/project#83
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22011)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
It's needed for platforms that don't define UINT64_MAX and similar macros
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21951)
Update commit messages that previously used ssl3_get_message()
to now use tls_get_message_header() and tls_get_message_body()
due to the split in OpenSSL 1.1.0.
CLA: trivial
Fixes#21582
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21886)
Hugo Landau
Matt Caswell
Daiki Ueno
atishkov
Tomas Mraz
Frederik Wedel-Heinen
Sumitra Sharma
Dimitri Papadopoulos
Richard Levitte