functions are now EVP_MAC functions, usually with ctx in their names.
Before 3.0 is released, the names are mutable and this prevents more
inconsistencies being introduced.
There are no functional or code changes.
Just the renaming and a little reformatting.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11997)
If sigalgs are not present we should not offer or accept them. We should
test that we handle this correctly.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11735)
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/11785)
Ensure we test scenarios where a FIPS peer is communication with a
non-FIPS peer. Check that a FIPS client doesn't offer ciphersuites it
doesn't have, and that a FIPS server only chooses ciphersuites it can
support.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11700)
Run a normal handshake and then request some extra tickets,
checking that the new_session_cb is called the expected number of
times. Since the tickets are generated in the same way as other
tickets, there should not be a need to verify that these specific ones
can be used to resume.
Run the test with both zero and a non-zero number of tickets issued in the
initial handshake.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11416)
The test_ccs_change_cipher() test routine is used only when TLS 1.2
is enabled; to fix the strict-warnings build we should not try to
compile it when TLS 1.2 is disabled, either.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11458)
... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.
Deprecate stack-of-block
Better documentation
Move some ASN1 struct typedefs to types.h
Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)
We also don't load the default provider into the default libctx to make
sure there is no accidental "leakage".
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11508)
For the moment this still just uses the default library context, but a
future version of sslapitest will specify a non-default library context.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11410)
At the moment we just use the default libctx - but a future PR will add
support for running sslapitest with a non-default libctx.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11407)
We have no need for a new set of SSL_CTXs in test_ccs_change_cipher(), so
just keep using the original ones. Also, fix a typo in a comment.
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11336)
The TLS (pre-1.3) ChangeCipherState message is usually used to indicate
the switch from the unencrypted to encrypted part of the handshake.
However, it can also be used in cases where there is an existing
session (such as during resumption handshakes) or when changing from
one cipher to a different one (such as during renegotiation when the
cipher list offered by the client has changed). This test serves
to exercise such situations, allowing us to detect whether session
objects are being modified in cases when they must remain immutable
for thread-safety purposes.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)
The hostname_cb in sslapitest.c was originally only defined if TLSv1.3
was enabled. A recently added test now uses this unconditionally, so we
move the function implementation earlier in the file, and always compile
it in.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11014)
PR#6975 added the ability to our test framework to have common options to
all tests. For example providing the option "-test 5" to one of our test
programs will just run test number 5. This can be useful when debugging
tests.
Unforuntately this does not work well for a number of tests. In particular
those tests that call test_get_argument() without first skipping over these
common test options will not get the expected value. Some tests did this
correctly but a large number did not.
A helper function is introduced, test_skip_common_options(), to make this
easier for those tests which do not have their own specialised test option
handling, but yet still need to call test_get_argument(). This function
call is then added to all those tests that need it.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10975)
Test this on both the client and the server after a normal handshake,
and after a resumption handshake. We also test what happens if an
inconsistent SNI is set between the original handshake and the resumption
handshake. Finally all of this is also tested in TLSv1.2 and TLSv1.3.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/10018)
Backwards compatibility with the old ticket key call back is maintained.
This will be removed when the low level HMAC APIs are finally removed.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10836)
Also Add ability for providers to dynamically exclude cipher algorithms.
Cipher algorithms are only returned from providers if their capable() method is either NULL,
or the method returns 1.
This is mainly required for ciphers that only have hardware implementations.
If there is no hardware support, then the algorithm needs to be not available.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10146)
Fixes#8322
The leak-checking (and backtrace option, on some platforms) provided
by crypto-mdebug and crypto-mdebug-backtrace have been mostly neutered;
only the "make malloc fail" capability remains. OpenSSL recommends using
the compiler's leak-detection instead.
The OPENSSL_DEBUG_MEMORY environment variable is no longer used.
CRYPTO_mem_ctrl(), CRYPTO_set_mem_debug(), CRYPTO_mem_leaks(),
CRYPTO_mem_leaks_fp() and CRYPTO_mem_leaks_cb() return a failure code.
CRYPTO_mem_debug_{malloc,realloc,free}() have been removed. All of the
above are now deprecated.
Merge (now really small) mem_dbg.c into mem.c
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10572)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
A test in sslapitest.c was failing in a no-ec build because we were using
an EC based ciphersuite. That particular test doesn't require EC
specifically, so we swap to a non EC based ciphersuite.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9716)
Actually supply a chain and then test:
1) A successful check of both the ee and chain certs
2) A failure to check the ee cert
3) A failure to check a chain cert
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9442)
Make sure we only test TLSv1.2 things if TLSv1.2 is actually available.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9442)
Deprecate all xxx_F_ defines.
Removed some places that tested for a specific function.
Use empty field for the function names in output.
Update documentation.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9058)
Augment the cert_cb sslapitest to include a run that uses
SSL_check_chain() to inspect the certificate prior to installing
it on the SSL object. If the check shows the certificate as not
valid in that context, we do not install a certificate at all, so
the handshake will fail later on in processing (tls_choose_sigalg()),
exposing the indicated regression.
Currently it fails, since we have not yet set the shared sigalgs
by the time the cert_cb runs.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9157)
Now that we have TLSv1.3 FFDHE support there is no reason why we should
not allow TLSv1.3 to be used in a no-ec build. This commit enables that
to happen.
It also fixes no-ec which was previously broken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)
The recent TLSv1.3 FFDHE support missed a few OPENSSL_NO_DH guards.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9153)
This commit adds the SSL_sendfile call, which allows KTLS sockets to
transmit file using zero-copy semantics.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8727)
Add a unit-test for ktls receive side.
Change-Id: I890588681d05fba419f644f6d903be6dc83c9ed5
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
Prior to this commit we were keeping a count of how many KeyUpdates we
have processed and failing if we had had too many. This simplistic approach
is not sufficient for long running connections. Since many KeyUpdates
would not be a particular good DoS route anyway, the simplest solution is
to simply remove the key update count.
Fixes#8068
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8299)
Add SSL_OP64_NO_EXTENDED_MASTER_SECRET, that can be set on either
an SSL or an SSL_CTX. When processing a ClientHello, if this flag
is set, do not indicate that the EMS TLS extension was received in
either the ssl3 object or the SSL_SESSION. Retain most of the
sanity checks between the previous and current session during
session resumption, but weaken the check when the current SSL
object is configured to not use EMS.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3910)
The original 1.1.1 design was to use SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal start/end of a post-handshake message
exchange in TLSv1.3. Unfortunately experience has shown that this confuses
some applications who mistake it for a TLSv1.2 renegotiation. This means
that KeyUpdate messages are not handled properly.
This commit removes the use of SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal the start/end of a post-handshake
message exchange. Individual post-handshake messages are still signalled in
the normal way.
This is a potentially breaking change if there are any applications already
written that expect to see these TLSv1.3 events. However, without it,
KeyUpdate is not currently usable for many applications.
Fixes#8069
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8096)
During a DTLS handshake we may need to periodically handle timeouts in the
DTLS timer to ensure retransmits due to lost packets are performed. However,
one peer will always complete a handshake before the other. The DTLS timer
stops once the handshake has finished so any handshake messages lost after
that point will not automatically get retransmitted simply by calling
DTLSv1_handle_timeout(). However attempting an SSL_read implies a
DTLSv1_handle_timeout() and additionally will process records received from
the peer. If those records are themselves retransmits then we know that the
peer has not completed its handshake yet and a retransmit of our final
flight automatically occurs.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8047)
Add a unit-test for ktls.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)
Fix some issues in tls13_hkdf_expand() which impact the above function
for TLSv1.3. In particular test that we can use the maximum label length
in TLSv1.3.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7755)
Pauli
Vadim Fedorenko
Matt Caswell
Dmitry Belyavskiy
raja-ashok
Nikolay Morozov
Benjamin Kaduk
Rich Salz
Ben Kaduk
Shane Lontis
Dr. Matthias St. Pierre
Boris Pismenny
Todd Short
Kurt Roeckx
Richard Levitte