Including e_os.h with a path from a header file doesn't work well on
certain exotic platform. It simply fails to build.
Since we don't seem to be able to stop ourselves, the better move is
to move e_os.h to an include directory that's part of the inclusion
path given to the compiler.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17641)
The function/macro allow user get groups/extensions without memory allcations.
So we could calculate the ssl fignerprint(ja3) in low cost.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16910)
For platforms that do not have native TSAN support, locking needs to be used
instead. This adds the locking.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17489)
We should not be freeing the caller's key in the event of error.
Fixes#17196
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17209)
If an async job pauses while processing a TLS connection then the
rwstate gets set to SSL_ASYNC_PAUSED. When resuming the job we should
reset the rwstate back to SSL_NOTHING. In fact we can do this
unconditionally since if we're about to call ASYNC_start_job() then either
we are about to start the async job for the first time (in which case the
rwstate should already by SSL_NOTHING), or we are restarting it after a
pause (in which case reseting it to SSL_NOTHING is the correct action).
Fixes#16809
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17013)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16918)
Various comments referred to s->packet and s->packet_length instead of
s->rlayer.packet and s->rlayer.packet_length. Also fixed is a spot where
RECORD_LAYER_write_pending() should have been used. Based on the review
comments in #16077.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/16086)
If an application is halfway through writing application data it should
not be allowed to attempt an SSL_key_update() operation. Instead the
SSL_write() operation should be completed.
Fixes#12485
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16077)
When EVP_MD_CTX_new fails call SSLfatal before the goto err.
This resolves a state machine issue on the out of memory condition.
Fixes#15491.
CLA: trivial
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15520)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
The initial implementation always deferred the generation of the
requested ticket(s) until the next application write, but this
is not a great fit for what it actually does, architecturally wise.
A request to send a session ticket means entering back into the
handshake state machine (or "in init", as it's known in the
implementation). The state machine transition is not something that
only occurs at an application-data write, and in general could occur at
any time. The only constraint is that we can't enter "init" while in
the middle of writing application data. In such cases we will need to
wait until the next TLS record boundary to enter the state machine,
as is currently done.
However, there is no reason why we cannot enter the handshake state
machine immediately in SSL_new_session_ticket() if there are no
application writes pending. Doing so provides a cleaner API surface to
the application, as then calling SSL_do_handshake() suffices to drive
the actual ticket generation. In the previous state of affairs a dummy
zero-length SSL_write() would be needed to trigger the ticket
generation, which is a logical mismatch in the type of operation being
performed.
This commit should only change whether SSL_do_handshake() vs zero-length
SSL_write() is needed to immediately generate a ticket after the
SSL_new_session_ticket() call -- the default behavior is still to defer
the actual write until there is other application data to write, unless
the application requests otherwise.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14817)
Add -client_renegotiation flag support. The -client_renegotiation flag is
equivalent to SSL_OP_ALLOW_CLIENT_RENEGOTIATION. Add support to the app,
the config code, and the documentation.
Add SSL_OP_ALLOW_CLIENT_RENEGOTIATION to the SSL tests. We don't need to
always enable it, but there are so many tests so this is the easiest thing
to do.
Add a test where client tries to renegotiate and it fails as expected. Add
a test where server tries to renegotiate and it succeeds. The second test
is supported by a new flag, -immediate_renegotiation, which is ignored on
the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15184)
Less tersely: converted SSL_get_options, SSL_set_options,
SSL_CTX_get_options and SSL_CTX_get_options to take and return uint64_t
since we were running out of 32 bits.
Fixes: 15145
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
Previously we would set SSL_OP_LEGACY_SERVER_CONNECT by default in
SSL_CTX_new(), to allow connections to legacy servers that did not
implement RFC 5746.
It has been more than a decade since RFC 5746 was published, so
there has been plenty of time for implmentation support to roll out.
Change the default behavior to be to require peers to support
secure renegotiation. Existing applications that already cleared
SSL_OP_LEGACY_SERVER_CONNECT will see no behavior change, as
re-clearing the flag is just a little bit of redundant work.
The old behavior is still available by explicitly setting the flag
in the application.
Also remove SSL_OP_LEGACY_SERVER_CONNECT from SSL_OP_ALL, for
similar reasons.
Document the behavior change in CHANGES.md, and update the
SSL_CTX_set_options() and SSL_CONF_cmd manuals to reflect the change
in default behavior.
Fixes: 14848
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
`strdup(propq)` failure is doing a `goto err;` from where `SSL_CTX_free` is called.
The possible call is made before reference and lock fields setup.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/15052)
It's possible to set an invalid protocol list that will be sent in a
ClientHello. This validates the inputs to make sure this does not
happen.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14815)
Following on from CVE-2021-3449 which was caused by a non-zero length
associated with a NULL buffer, other buffer/length pairs are updated to
ensure that they too are always in sync.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Some functions that lock things are void, so we just return early.
Also make ossl_namemap_empty return 0 on error. Updated the docs, and added
some code to ossl_namemap_stored() to handle the failure, and updated the
tests to allow for failure.
Fixes: #14230
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14238)
A trivial PR to remove some commonly repeated words. It looks like this is
not the first PR to do this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14420)
The low level SRP implementation has been deprecated with no replacement.
Therefore the libssl level APIs need to be similarly deprecated.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14132)
The default supported groups code was disabled in the event of a build
with no-ec and no-dh. However now that providers can add there own
groups (which might not fit into either of these categories), this is
no longer appropriate.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
This removes man unnecessary OPENSSL_NO_DH guards from libssl. Now that
libssl is entirely using the EVP APIs and implementations can be plugged
in via providers it is no longer needed to disable DH at compile time in
libssl. Instead it should detect at runtime whether DH is available from
the loaded providers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
The client-side cert verification callback function may not only return
as usual for success or 0 for failure, but also -1,
typically on failure verifying the server certificate.
This makes the handshake suspend and return control to the calling application
with SSL_ERROR_WANT_RETRY_VERIFY.
The app can for instance fetch further certificates or cert status information
needed for the verification.
Calling SSL_connect() again resumes the connection attempt
by retrying the server certificate verification step.
This process may even be repeated if need be.
The core implementation of the feature is in ssl/statem/statem_clnt.c,
splitting tls_process_server_certificate() into a preparation step
that just copies the certificates received from the server to s->session->peer_chain
(rather than having them in a local variable at first) and returns to the state machine,
and a post-processing step in tls_post_process_server_certificate() that can be repeated:
Try verifying the current contents of s->session->peer_chain basically as before,
but give the verification callback function the chance to pause connecting and
make the TLS state machine later call tls_post_process_server_certificate() again.
Otherwise processing continues as usual.
The documentation of the new feature is added to SSL_CTX_set_cert_verify_callback.pod
and SSL_want.pod.
This adds two tests:
* A generic test in test/helpers/handshake.c
on the usability of the new server cert verification retry feature.
It is triggered via test/ssl-tests/03-custom_verify.cnf.in (while the bulky auto-
generated changes to test/ssl-tests/03-custom_verify.cnf can be basically ignored).
* A test in test/sslapitest.c that demonstrates the effectiveness of the approach
for augmenting the cert chain provided by the server in between SSL_connect() calls.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13906)
The openssl code base has only a few occurrences of 'unsigned const char'
(15 occurrences), compared to the more common 'const unsigned char' (4420
occurrences).
While the former is not illegal C, mixing the 'const' keyword (a 'type
qualifier') in between 'unsigned' and 'char' (both 'type specifiers') is a
bit odd.
The background for writing this patch is not to be pedantic, but because
the 'opmock' program (used to mock headers for unit tests) does not accept
the 'unsigned const char' construct. While this definitely is a bug in
opmock or one of its dependencies, openssl is the only piece of software we
are using in combination with opmock that has this construct.
CLA: trivial
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/13722)
disabled_enc_mask et al were global. Now that cipher loading is done
individually for each SSL_CTX, based on the libctx configured for that
SSL_CTX this means that some things will be disabled for one SSL_CTX but
not for another. The global variables set up the potential for different
SSL_CTXs to trample on each other. We move these variables into the SSL_CTX
structure.
Fixes#12040
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13465)
This was probably due to a merge
Fixes#13449
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/13450)
no-dh disables the low level API for DH. However, since we're now using
the high level EVP API in most places we don't need to disable quite so
much.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
The old function took a DH as a parameter. In the new version we pass
an EVP_PKEY instead. Similarly for the SSL_CTX version of this function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
These ctrls pass around a DH object which is now deprecated, so we
deprecate the ctrls themselves.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
We create a new file ssl/tls_depr.c to contain functions that need to call
deprecated APIs in libssl. This enables us to remove
OPENSSL_SUPPRESS_DEPRECATED from a number of other libssl files.
The deprecated API usage is either related to ENGINEs and is needed to
continue to support applications that use such ENGINEs. Or they are needed
to support some deprecated public libssl APIs.
One other file remains in libssl that still uses deprecated APIs: s3_cbc.c
This is needed to support the deprecated SSLv3.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13135)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Automatically rename all instances of _with_libctx() to _ex() as per
our coding style.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
We fix 3 problems with safestack:
- Including an openssl header file without linking against libcrypto
can cause compilation failures (even if the app does not otherwise need
to link against libcrypto). See issue #8102
- Recent changes means that applications in no-deprecated builds will need
to include additional macro calls in the source code for all stacks that
they need to use - which is an API break. This changes avoids that
necessity.
- It is not possible to write code using stacks that works in both a
no-deprecated and a normal build of OpenSSL. See issue #12707.
Fixes#12707
Contains a partial fix for #8102. A similar PR will be needed for hash to
fully fix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12781)
HPE NonStop Port Changes for 3.0.0 Includes unthreaded, PUT, and SPT for OSS.
The port changes include wrapping where necessary for FLOSS and
appropriate configuration changes to support that. Two tests
are excluded as being inappropriate for the platform.
The changes are:
* Added /usr/local/include to nonstop-nsx_spt_floss to load floss.h
* Added SPT Floss variant for NonStop
* Wrapped FLOSS definitions in OPENSSL_TANDEM_FLOSS to allow selective enablement.
* SPT build configuration for NonStop
* Skip tests not relevant for NonStop
* PUT configuration changes required for NonStop platforms
* Configurations/50-nonstop.conf: updates for TNS/X platform.
* FLOSS instrumentation for HPE NonStop TNS/X and TNS/E platforms.
* Configurations/50-nonstop.conf: modifications for non-PUT TNS/E platform b
* Fix use of DELAY in ssltestlib.c for HPNS.
* Fixed commit merge issues and added floss to http_server.c
CLA: Permission is granted by the author to the OpenSSL team to use these modifications.
Fixes#5087.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12800)
Also, document its unusual semantics of resetting the
cipher list (but preserving other configuration).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/7274)
The RAND_DRBG API did not fit well into the new provider concept as
implemented by EVP_RAND and EVP_RAND_CTX. The main reason is that the
RAND_DRBG API is a mixture of 'front end' and 'back end' API calls
and some of its API calls are rather low-level. This holds in particular
for the callback mechanism (RAND_DRBG_set_callbacks()) and the RAND_DRBG
type changing mechanism (RAND_DRBG_set()).
Adding a compatibility layer to continue supporting the RAND_DRBG API as
a legacy API for a regular deprecation period turned out to come at the
price of complicating the new provider API unnecessarily. Since the
RAND_DRBG API exists only since version 1.1.1, it was decided by the OMC
to drop it entirely.
Other related changes:
Use RNG instead of DRBG in EVP_RAND documentation. The documentation was
using DRBG in places where it should have been RNG or CSRNG.
Move the RAND_DRBG(7) documentation to EVP_RAND(7).
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12509)
The X509_VERIFY_PARAM can only take a single IP address, although it can
have multiple hostnames. When SSL_add1_host() is given an IP address,
don't accept it if there is already one configured.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9201)
There is a slight mismatch here because X509_VERIFY_PARAM copes only
with a single IP address, and doesn't let it be cleared once it's set.
But this fixes up the major use case, making things easier for users to
get it right.
The sconnect demo now works for Legacy IP literals; for IPv6 it needs to
fix up the way it tries to split the host:port string, which will happen
in a subsequent patch.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9201)
- In order to not add many X509_XXXX_with_libctx() functions the libctx and propq may be stored in the X509 object via a call to X509_new_with_libctx().
- Loading via PEM_read_bio_X509() or d2i_X509() should pass in a created cert using X509_new_with_libctx().
- Renamed some XXXX_ex() to XXX_with_libctx() for X509 API's.
- Removed the extra parameters in check_purpose..
- X509_digest() has been modified so that it expects a const EVP_MD object() and then internally it does the fetch when it needs to (via ASN1_item_digest_with_libctx()).
- Added API's that set the libctx when they load such as X509_STORE_new_with_libctx() so that the cert chains can be verified.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12153)
Deprecate SSL_get_peer_certificte() and replace with
SSL_get1_peer_certificate().
Add SSL_get0_peer_certificate.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8730)
For CBC ciphersuites using Mac-then-encrypt we have to be careful about
removing the MAC from the record in constant time. Currently that happens
immediately before MAC verification. Instead we move this responsibility
to the various protocol "enc" functions so that MAC removal is handled at
the same time as padding removal.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
Usually it will be freed in tls_early_post_process_client_hello().
However if a ClientHello callback will be used and will return
SSL_CLIENT_HELLO_RETRY then tls_early_post_process_client_hello()
may never come to the point where pre_proc_exts is freed.
Fixes#12194
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/12330)
SSL_dup attempted to duplicate the BIO state if the source SSL had BIOs
configured for it. This did not work.
Firstly the SSL_dup code was passing a BIO ** as the destination
argument for BIO_dup_state. However BIO_dup_state expects a BIO * for that
parameter. Any attempt to use this will either (1) fail silently, (2) crash
or fail in some other strange way.
Secondly many BIOs do not implement the BIO_CTRL_DUP ctrl required to make
this work.
Thirdly, if rbio == wbio in the original SSL object, then an attempt is made
to up-ref the BIO in the new SSL object - even though it hasn't been set
yet and is NULL. This results in a crash.
This appears to have been broken for a very long time with at least some of
the problems described above coming from SSLeay. The simplest approach is
to just remove this capability from the function.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12180)
A number of these functions returned a NID or an array of NIDs for the
groups. Now that groups can come from the providers we do not necessarily
know the NID. Therefore we need to handle this in a clean way.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
Now that we have added the TLS-GROUP capability to the default provider
we can use that to discover the supported group list based on the loaded
providers.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
We should confirm that Signature Algorithms are actually available
through the loaded providers before we offer or select them.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
The underlying functions remain and these are widely used.
This undoes the deprecation part of PR8442
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12001)
This API requests that the TLS stack generate a (TLS 1.3)
NewSessionTicket message the next time it is safe to do so (i.e., we do
not have other data pending write, which could be mid-record). For
efficiency, defer actually generating/writing the ticket until there
is other data to write, to avoid producing server-to-client traffic when
not needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11416)
... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.
Deprecate stack-of-block
Better documentation
Move some ASN1 struct typedefs to types.h
Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)
Ensure that when we create a CTLOG_STORE we use the new library context
aware function.
Also ensure that when we create a CT_POLICY_EVAL_CTX we associate it with
the library context.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11483)
Some fetch failurs are ok and should be ignored.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11405)
We don't need to check if an engine has a cipher/digest in a no-engine
build.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/11031)
We modify libssl to use explicitly fetched ciphers, digests and other
algorithms as required based on the configured library context and
property query string for the SSL_CTX that is being used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10854)
The SNI behaviour for TLSv1.3 and the behaviour of SSL_get_servername()
was not quite right, and not entirely consistent with the RFC.
The TLSv1.3 RFC explicitly says that SNI is negotiated on each handshake
and the server is not required to associate it with the session. This was
not quite reflected in the code so we fix that.
Additionally there were some additional checks around early_data checking
that the SNI between the original session and this session were
consistent. In fact the RFC does not require any such checks, so they are
removed.
Finally the behaviour of SSL_get_servername() was not quite right. The
behaviour was not consistent between resumption and normal handshakes,
and also not quite consistent with historical behaviour. We clarify the
behaviour in various scenarios and also attempt to make it match historical
behaviour as closely as possible.
Fixes#8822
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/10018)
Now that libssl knows about libctx we should use it wherever we generate
a random number.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10927)
We add the ability to specify an OPENSSL_CTX (which may be NULL for the
default context) and a property query string for use during algorithm
fetch operations.
For example, in this way one SSL_CTX could be used the default provider,
and another one could be used with the FIPS provider.
At this stage we don't use these values. That will come later.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10866)
This is a wrapper around OSSL_STORE.
This also adds necessary support functions:
- X509_STORE_load_file
- X509_STORE_load_path
- X509_STORE_load_store
- SSL_add_store_cert_subjects_to_stack
- SSL_CTX_set_default_verify_store
- SSL_CTX_load_verify_file
- SSL_CTX_load_verify_dir
- SSL_CTX_load_verify_store
and deprecates X509_STORE_load_locations and SSL_CTX_load_verify_locations,
as they aren't extensible.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8442)
Avoid tripping over errno values from previous system calls in the
thread and just hardcode the specific error. BIO_get_ktls_send()
should never be true in the NO_KTLS path, so the #ifdef could be
moved even higher up to assume that error path in the NO_KTLS case
instead.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10045)
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10194)
Also added blanks lines after declarations in a couple of places.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9916)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Change SYSerr to have the function name; remove SYS_F_xxx defines
Add a test and documentation.
Use get_last_socket_err, which removes some ifdef's in OpenSSL code.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9072)
Also, use define rather than sizeof
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9377)
It was only ever in cert_st because ssl_st was a public structure
and could not be modified without breaking the API. However, both
structures are now opaque, and thus we can freely change their layout
without breaking applications. In this case, keeping the shared
sigalgs in the SSL object prevents complications wherein they would
inadvertently get cleared during SSL_set_SSL_CTX() (e.g., as run
during a cert_cb).
Fixes#9099
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9157)
The previous 2 commits moved supported groups and ciphers out of the
session object to avoid race conditions. We now also move ecpointformats
for consistency. There does not seem to be a race condition with access
to this data since it is only ever set in a non-resumption handshake.
However, there is no reason for it to be in the session.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
Similarly to the previous commit we were storing the peer offered list
of ciphers in the session. In practice there is no need for this
information to be avilable from one resumption to the next since this
list is specific to a particular handshake. Since the session object is
supposed to be immutable we should not be updating it once we have decided
to resume. The solution is to remove the session list out of the session
object.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
In TLSv1.3 the supported groups can be negotiated each time a handshake
occurs, regardless of whether we are resuming or not. We should not store
the supported groups information in the session because session objects
can be shared between multiple threads and we can end up with race
conditions. For most users this won't be seen because, by default, we
use stateless tickets in TLSv1.3 which don't get shared. However if you
use SSL_OP_NO_TICKET (to get stateful tickets in TLSv1.3) then this can
happen.
The answer is to move the supported the supported group information into
the SSL object instead.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
Now that we have TLSv1.3 FFDHE support there is no reason why we should
not allow TLSv1.3 to be used in a no-ec build. This commit enables that
to happen.
It also fixes no-ec which was previously broken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)
Making the default cipher strings a function gives the library more
control over the defaults. Potentially allowing a change in the
future as ciphers become deprecated or dangerous.
Also allows third party distributors to change the defaults for their
installations.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8686)
This function only returns a status and does not modify the parameter.
Since similar function are already taking const parameters, also
change this function to have a const parameter.
Fixes#8934
CLA: trivial
Signed-off-by: Arne Schwabe <arne@rfc2549.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8945)
This commit adds the SSL_sendfile call, which allows KTLS sockets to
transmit file using zero-copy semantics.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8727)
With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.
This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8756)
set_cipher_list() sets TLSv1.2 (and below) ciphers, and its success or
failure should not depend on whether set_ciphersuites() has been used to
setup TLSv1.3 ciphers.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7759)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Signed-off-by: Ping Yu <ping.yu@intel.com>
Signed-off-by: Steven Linsell <stevenx.linsell@intel.com>
(Merged from https://github.com/openssl/openssl/pull/7573)
This patch adds support for the Linux TLS Tx socket option.
If the socket option is successful, then the data-path of the TCP socket
is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)
Previously, the API version limit was indicated with a numeric version
number. This was "natural" in the pre-3.0.0 because the version was
this simple number.
With 3.0.0, the version is divided into three separate numbers, and
it's only the major number that counts, but we still need to be able
to support pre-3.0.0 version limits.
Therefore, we allow OPENSSL_API_COMPAT to be defined with a pre-3.0.0
style numeric version number or with a simple major number, i.e. can
be defined like this for any application:
-D OPENSSL_API_COMPAT=0x10100000L
-D OPENSSL_API_COMPAT=3
Since the pre-3.0.0 numerical version numbers are high, it's easy to
distinguish between a simple major number and a pre-3.0.0 numerical
version number and to thereby support both forms at the same time.
Internally, we define the following macros depending on the value of
OPENSSL_API_COMPAT:
OPENSSL_API_0_9_8
OPENSSL_API_1_0_0
OPENSSL_API_1_1_0
OPENSSL_API_3
They indicate that functions marked for deprecation in the
corresponding major release shall not be built if defined.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7724)
SSL(_CTX)?_set_client_CA_list() was a server side only function in 1.1.0.
If it was called on the client side then it was ignored. In 1.1.1 it now
makes sense to have a CA list defined for both client and server (the
client now sends it the the TLSv1.3 certificate_authorities extension).
Unfortunately some applications were using the same SSL_CTX for both
clients and servers and this resulted in some client ClientHellos being
excessively large due to the number of certificate authorities being sent.
This commit seperates out the CA list updated by
SSL(_CTX)?_set_client_CA_list() and the more generic
SSL(_CTX)?_set0_CA_list(). This means that SSL(_CTX)?_set_client_CA_list()
still has no effect on the client side. If both CA lists are set then
SSL(_CTX)?_set_client_CA_list() takes priority.
Fixes#7411
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7503)
I was never exported in our shared libraries and no one noticed, and
we don't seem to use it ourselves, so clean it away.
In all likelyhood, this is a remain from the 90's, when it was in
fashion to litter library modules with these kinds of strings.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7340)
Historically SSL_CTX_set_ssl_version() has reset the cipher list
to the default. Splitting TLS 1.3 ciphers to be tracked separately
caused a behavior change, in that TLS 1.3 cipher configuration was
preserved across calls to SSL_CTX_set_ssl_version(). To restore commensurate
behavior with the historical behavior, set the ciphersuites to the default as
well as setting the cipher list to the default.
Closes: #7226
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7270)
PR #3783 introduce coded to reset the server side SNI state in
SSL_do_handshake() to ensure any erroneous config time SNI changes are
cleared. Unfortunately SSL_do_handshake() can be called mid-handshake
multiple times so this is the wrong place to do this and can mean that
any SNI data is cleared later on in the handshake too.
Therefore move the code to a more appropriate place.
Fixes#7014
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7149)
Ideally, SSL_get_servername() would do exactly as it is documented
and return exactly what the client sent (i.e., what we currently
are stashing in the SSL's ext.hostname), without needing to refer
to an SSL_SESSION object. For historical reasons, including the
parsed SNI value from the ClientHello originally being stored in the
SSL_SESSION's ext.hostname field, we have had references to the
SSL_SESSION in this function. We cannot fully excise them due to
the interaction between user-supplied callbacks and TLS 1.2 resumption
flows, where we call all callbacks but the client did not supply an
SNI value. Existing callbacks expect to receive a valid SNI value
in this case, so we must fake one up from the resumed session in
order to avoid breakage.
Otherwise, greatly simplify the implementation and just return the
value in the SSL, as sent by the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7115)
We already have SSL_set_post_handshake_auth(). This just adds the SSL_CTX
equivalent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6938)
Having post handshake auth automatically switched on breaks some
applications written for TLSv1.2. This changes things so that an explicit
function call is required for a client to indicate support for
post-handshake auth.
Fixes#6933.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6938)
Commit 1c4aa31d79 changed how we process
and store SNI information during the handshake, so that a hostname is
only saved in the SSL_SESSION structure if that SNI value has actually
been negotiated. SSL_get_servername() was adjusted to match, with a new
conditional being added to handle the case when the handshake processing
is ongoing, and a different location should be consulted for the offered
SNI value. This was done in an attempt to preserve the historical
behavior of SSL_get_servername(), a function whose behavior only mostly
matches its documentation, and whose documentation is both lacking and
does not necessarily reflect the actual desired behavior for such an
API. Unfortunately, sweeping changes that would bring more sanity to
this space are not possible until OpenSSL 1.2.0, for ABI compatibility
reasons, so we must attempt to maintain the existing behavior to the
extent possible.
The above-mentioned commit did not take into account the behavior
of SSL_get_servername() during resumption handshakes for TLS 1.2 and
prior, where no SNI negotiation is performed. In that case we would
not properly parse the incoming SNI and erroneously return NULL as
the servername, when instead the logical session is associated with
the SNI value cached in the SSL_SESSION. (Note that in some cases an
SNI callback may not need to do anything in a TLS 1.2 or prior resumption
flow, but we are calling the callbacks and did not provide any guidance
that they should no-op if the connection is being resumed, so we must
handle this case in a usable fashion.) Update our behavior accordingly to
return the session's cached value during the handshake, when resuming.
This fixes the boringssl tests.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6792)
In particular, adhere to the rule that we must not modify any
property of an SSL_SESSION object once it is (or might be) in
a session cache. Such modifications are thread-unsafe and have
been observed to cause crashes at runtime.
To effect this change, standardize on the property that
SSL_SESSION->ext.hostname is set only when that SNI value
has been negotiated by both parties for use with that session.
For session resumption this is trivially the case, so only new
handshakes are affected.
On the client, the new semantics are that the SSL->ext.hostname is
for storing the value configured by the caller, and this value is
used when constructing the ClientHello. On the server, SSL->ext.hostname
is used to hold the value received from the client. Only if the
SNI negotiation is successful will the hostname be stored into the
session object; the server can do this after it sends the ServerHello,
and the client after it has received and processed the ServerHello.
This obviates the need to remove the hostname from the session object
in case of failed negotiation (a change that was introduced in commit
9fb6cb810b in order to allow TLS 1.3
early data when SNI was present in the ClientHello but not the session
being resumed), which was modifying cached sessions in certain cases.
(In TLS 1.3 we always produce a new SSL_SESSION object for new
connections, even in the case of resumption, so no TLS 1.3 handshakes
were affected.)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
Previoulsy we just had max_early_data which controlled both the value of
max early_data that we advertise in tickets *and* the amount of early_data
that we are willing to receive from clients. This doesn't work too well in
the case where we want to reduce a previously advertised max_early_data
value. In that case clients with old, stale tickets may attempt to send us
more early data than we are willing to receive. Instead of rejecting the
early data we abort the connection if that happens.
To avoid this we introduce a new "recv_max_early_data" value. The old
max_early_data becomes the value that is advertised in tickets while
recv_max_early_data is the maximum we will tolerate from clients.
Fixes#6647
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6655)
Implement support for stateful TLSv1.3 tickets, and use them if
SSL_OP_NO_TICKET is set.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6563)
Because TLS 1.3 sends more non-application data records some clients run
into problems because they don't expect SSL_read() to return and set
SSL_ERROR_WANT_READ after processing it.
This can cause problems for clients that use blocking I/O and use
select() to see if data is available. It can be cleared using
SSL_CTX_clear_mode().
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #6260
In TLSv1.2 and below we always cache new sessions by default on the server
side in the internal cache (even when we're using session tickets). This is
in order to support resumption from a session id.
In TLSv1.3 there is no session id. It is only possible to resume using the
ticket. Therefore, in the default case, there is no point in caching the
session in the internal store.
There is still a reason to call the external cache new session callback
because applications may be using the callbacks just to know about when
sessions are created (and not necessarily implementing a full cache). If
the application also implements the remove session callback then we are
forced to also store it in the internal cache so that we can create
timeout events. Otherwise the external cache could just fill up
indefinitely.
This mostly addresses the issue described in #5628. That issue also proposes
having an option to not create full stateless tickets when using the
internal cache. That aspect hasn't been addressed yet.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6293)
We send a session ticket automatically in TLSv1.3 at the end of the
handshake. This commit provides the ability to set how many tickets should
be sent. By default this is one.
Fixes#4978
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5227)
When a server call SSL_write_early_data() to write to an unauthenticated
client the buffering BIO is still in place, so we should ensure we flush
the write.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
The function SSL_get_shared_ciphers() is supposed to return ciphers shared
by the client and the server. However it only ever returned the client
ciphers.
Fixes#5317
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6113)
Commit d316cdcf6d introduced some extra
checks into the session-cache update procedure, intended to prevent
the caching of sessions whose resumption would lead to a handshake
failure, since if the server is authenticating the client, there needs to
be an application-set "session id context" to match up to the authentication
context. While that change is effective for its stated purpose, there
was also some collatoral damage introduced along with the fix -- clients
that set SSL_VERIFY_PEER are not expected to set an sid_ctx, and so
their usage of session caching was erroneously denied.
Fix the scope of the original commit by limiting it to only acting
when the SSL is a server SSL.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5967)
If SSL_set_bio() is called with a NULL wbio after a failed connection then
this can trigger an assertion failure. This should be valid behaviour and
the assertion is in fact invalid and can simply be removed.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5966)
This removes some code because we cannot trace the original contributor
to get their agreement for the licence change (original commit e03ddfae).
After this change there will be numerous failures in the test cases until
someone rewrites the missing code.
All *_free functions should accept a NULL parameter. After this change
the following *_free functions will fail if a NULL parameter is passed:
BIO_ACCEPT_free()
BIO_CONNECT_free()
BN_BLINDING_free()
BN_CTX_free()
BN_MONT_CTX_free()
BN_RECP_CTX_free()
BUF_MEM_free()
COMP_CTX_free()
ERR_STATE_free()
TXT_DB_free()
X509_STORE_free()
ssl3_free()
ssl_cert_free()
SSL_SESSION_free()
SSL_free()
[skip ci]
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5757)
The sid_ctx is something of a "certificate request context" or a
"session ID context" -- something from the application that gives
extra indication of what sort of thing this session is/was for/from.
Without a sid_ctx, we only know that there is a session that we
issued, but it could have come from a number of things, especially
with an external (shared) session cache. Accordingly, when resuming,
we will hard-error the handshake when presented with a session with
zero-length sid_ctx and SSL_VERIFY_PEER is set -- we simply have no
information about the peer to verify, so the verification must fail.
In order to prevent these future handshake failures, proactively
decline to add the problematic sessions to the session cache.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5175)
Place the session ticket AES and HMAC keys into secure memory.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2351)
When SSL_CTX is created preinitialize it with system default
configuration from system_default section.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4848)
Since the public and private DRBG are per thread we don't need one
per ssl object anymore. It could also try to get entropy from a DRBG
that's really from an other thread because the SSL object moved to an
other thread.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5547)
This commit adds a new api RAND_DRBG_set_defaults() which sets the
default type and flags for new DRBG instances. See also #5576.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5632)
Fixes#4403
This commit moves the internal header file "internal/rand.h" to
<openssl/rand_drbg.h>, making the RAND_DRBG API public.
The RAND_POOL API remains private, its function prototypes were
moved to "internal/rand_int.h" and converted to lowercase.
Documentation for the new API is work in progress on GitHub #5461.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5462)
With the current mechanism, old cipher strings that used to work in 1.1.0,
may inadvertently disable all TLSv1.3 ciphersuites causing connections to
fail. This is confusing for users.
In reality TLSv1.3 are quite different to older ciphers. They are much
simpler and there are only a small number of them so, arguably, they don't
need the same level of control that the older ciphers have.
This change splits the configuration of TLSv1.3 ciphers from older ones.
By default the TLSv1.3 ciphers are on, so you cannot inadvertently disable
them through your existing config.
Fixes#5359
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5392)
Adds application data into the encrypted session ticket
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3802)
When early data support was first added, this seemed like a good
idea, as it would allow applications to just add SSL_read_early_data()
calls as needed and have things "Just Work". However, for applications
that do not use TLS 1.3 early data, there is a negative side effect.
Having a nonzero max_early_data in a SSL_CTX (and thus, SSL objects
derived from it) means that when generating a session ticket,
tls_construct_stoc_early_data() will indicate to the client that
the server supports early data. This is true, in that the implementation
of TLS 1.3 (i.e., OpenSSL) does support early data, but does not
necessarily indicate that the server application supports early data,
when the default value is nonzero. In this case a well-intentioned
client would send early data along with its resumption attempt, which
would then be ignored by the server application, a waste of network
bandwidth.
Since, in order to successfully use TLS 1.3 early data, the application
must introduce calls to SSL_read_early_data(), it is not much additional
burden to require that the application also calls
SSL_{CTX_,}set_max_early_data() in order to enable the feature; doing
so closes this scenario where early data packets would be sent on
the wire but ignored.
Update SSL_read_early_data.pod accordingly, and make s_server and
our test programs into applications that are compliant with the new
requirements on applications that use early data.
Fixes#4725
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5483)
This commit adds SSL_export_keying_material_early() which exports
keying material using early exporter master secret.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5252)
The NIST standard presents two alternative ways for seeding the
CTR DRBG, depending on whether a derivation function is used or not.
In Section 10.2.1 of NIST SP800-90Ar1 the following is assessed:
The use of the derivation function is optional if either an
approved RBG or an entropy source provides full entropy output
when entropy input is requested by the DRBG mechanism.
Otherwise, the derivation function shall be used.
Since the OpenSSL DRBG supports being reseeded from low entropy random
sources (using RAND_POOL), the use of a derivation function is mandatory.
For that reason we change the default and replace the opt-in flag
RAND_DRBG_FLAG_CTR_USE_DF with an opt-out flag RAND_DRBG_FLAG_CTR_NO_DF.
This change simplifies the RAND_DRBG_new() calls.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
Richard Levitte
Phus Lu
Pauli
Dr. David von Oheimb
Matt Caswell
x2018
Pauli
Trev Larock
Tomas Mraz
Benjamin Kaduk
Rich Salz
FdaSilvaYY
Todd Short
Nan Xiao
Shane Lontis
Richard Levitte
Dr. David von Oheimb
Thomas De Schampheleire
Dr. Matthias St. Pierre
Ikko Ashimine
Randall S. Becker
Tomas Mraz
Pauli
David Woodhouse
Miłosz Kaniewski
Vadim Fedorenko
Tim Hudson
Dmitry Belyavskiy
John Baldwin
raja-ashok
Arne Schwabe
Boris Pismenny
dyrock
Sam Roberts
Sam Roberts
Ping Yu
Ben Kaduk
Andy Polyakov
Kurt Roeckx
Rich Salz
Tatsuhiro Tsujikawa