Creating JDK compatible pkcs12 files requires a bit more than just
adding the Trusted Key Usage OID to a certbag in the pkcs12 file.
Additionally the JDK currently requires that pkcs12 files setting this
oid _not_ contain any additional keys, and in response will produce
unpredictable results.
This could be solved by implying --nokeys when the pkcs12 utility is run
and the config option is set, but thatcould confuse users who didn't
specify nokeys on the command line. As such, remove the config file
setting for this feature, and replace it with a -jdktrust command line
option, that is documented to assert nokeys when a users specifies the
new command line option.
Fixes#22215
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22422)
Call app_bail_out if RAND_bytes() fails.
Also changed the output parameter of RAND_bytes() to inp as
writing to encrypted output buffer does not make sense.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21706)
In some error cases the normal cleanup did not
happen, but instead an exit(1) which caused some
memory leaks, as reported in #22049.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22055)
Note: It seems like the C compiler doesn't care about the duplicate.
(The first definition is eight lines above.) The C++ compiler however
didn't like it when I reused the tracing code snippets elsewhere.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22117)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22063)
void f() should probably be void f(void)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
when used in conjunction with -out and -modulus options.
Fixes#21403
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22026)
Using "*:{port}" is preferred to "[::]:{port}", because it won't break on
IPv4-only machines.
This fixes test failures in 79-test_http.t and 80-test_ssl_new.t on machines
without IPv6.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21989)
The valtype value of dkeyform defined in the s_server_options structure is F, which leads to the judgment that the engine is not supported when processing parameters in the opt_next function.
This the valtype value of dkeyform should be changed to "f".
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21982)
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21937)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21659)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21659)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21659)
This allows PBKDF2 to change the saltlen to something other than the
new default value of 16. Previously this app hardwired the salt length
to a maximum of 8 bytes. Non PBKDF2 mode uses EVP_BytesToKey()
internally, which is documented to only allow 8 bytes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21858)
This is used to calculate the TSA's public key certificate identifier.
The default algorithm is changed from sha1 to sha256.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21794)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21033)
Always report "<algo> ops in <time>", instead of "<algo>'s in <time>" or
similar. Avoid the use of apostrophes and/or plural with algorithm names.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21383)
While RSA encrypt/decrypt and sign/verify are basically the same mod-expo
operations, the speed of the operation may still differ, due to different
padding, as well as the use of implicit rejection for RSA decrypt.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21383)
Apply normal sentence case to db update message
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21535)
Running 'openssl speed eddsa' fails with
Doing 253 bits sign Ed25519 ops for 10s: EdDSA sign failure
000003FF9306C7D0:error:030000BC:digital envelope routines:EVP_DigestSign:
final error:crypto/evp/m_sigver.c:585:
-1 253 bits Ed25519 sign ops in 0.00s
Doing 253 bits verify Ed25519 ops for 10s: EdDSA verify failure
000003FF9306C7D0:error:030000BC:digital envelope routines:EVP_DigestVerify:
final error:crypto/evp/m_sigver.c:694:
-1 253 bits Ed25519 verify ops in 0.00s
This is because the EVP_DigestSign/Verify() calls in the EdDSA_sign/verify_loop()
fail because the context has already been finalized by the previous
EVP_DigestSign/Verify call during the EdDSA signature test done by speed_main().
This happens since commit 3fc2b7d6b8 where the
EVP_DigestSign/Verify() functions have been changed to set a flag that the
context has been finalized.
Fix this by re-initializing the context using EVP_DigestSign/Verify() in the
EdDSA_sign/verify_loop().
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21491)
Free the signature stack after iterating over all found signatures.
Free the kem and signature stacks at the end of speed_main() if not
NULL.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21491)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21467)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21116)
There was some typos of OPENSS_NO_QUIC (should be OPENSSL_NO_QUIC) in
s_client
Fixes#21291
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21293)
When running `openssl speed -evp md5` the result shows `md5` as algorithm
name. But when adding the option `-multi 2` it gives `evp` as algorithm
name.
Signed-off-by: Jörg Sommer <joerg@jo-so.de>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21216)
The pkeyutl app was truncating the input file for decryption leading to
incorrect results. This was probably ok historically when RSA was being
used for decryption which has short maximum sizes. This is not ok with SM2.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21272)
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21137)
EVP_PKEY_get_default_digest_name() may return 1 with the returned digest
name "UNDEF". This case hasn't been documented, and the meaning has been
left undefined, until now.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20460)
Typos in doc/man* will be fixed in a different commit.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20910)
This can effectively reduce the binary size for platforms
that don't need ECX feature(~100KB).
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20781)
Neil Horman
Tomas Mraz
Dr. David von Oheimb
Klavishnik
Matt Caswell
Michael Baentsch
Bernd Edlinger
Mathieu Tortuyaux
Matthias St. Pierre
Dimitri Papadopoulos
Richard Levitte
wangcheng
Philip Prindeville
slontis
olszomal
Hugo Landau
Ingo Franzki
Fatih Arslan Tugay
atishkov
Rajeev Ranjan
Jörg Sommer
Yannik Sembritzki
Yi Li