When the context is reinitialized, i.e. the same key should be used
we must properly reinitialize the underlying implementation.
However in POLY1305 case it does not make sense as this special MAC
should not reuse keys. We fail with this provided implementation
when reinitialization happens.
Fixes#17811
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18100)
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18023)
This patch optimizes SM4 for ARM processor using ASIMD instruction
It will improve performance if both of following conditions are met:
1) Input data equal to or more than 4 blocks
2) Cipher mode allows parallelism, including ECB,CTR,GCM or CBC decryption
This patch implements SM4 SBOX lookup in vector registers, with the
benefit of constant processing time over existing C implementation.
It is only enabled for micro-architecture N1/V1. In the ideal scenario,
performance can reach up to 2.7X
When either of above two conditions is not met, e.g. single block input
or CFB/OFB mode, CBC encryption, performance could drop about 50%.
The assembly code has been reviewed internally by ARM engineer
Fangming.Fang@arm.com
Signed-off-by: Daniel Hu <Daniel.Hu@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17951)
This refactors OSSL_LIB_CTX to avoid using CRYPTO_EX_DATA. The assorted
objects to be managed by OSSL_LIB_CTX are hardcoded and are initialized
eagerly rather than lazily, which avoids the need for locking on access
in most cases.
Fixes#17116.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17881)
The scrypt KDF provider's dup method calls kdf_scrypt_new passing a
libctx, but a provider context is expected. Since the provider context
is passed as void *, this was not caught.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17873)
This patch will allow the SM4-GCM function to leverage the SM4
high-performance CTR crypto interface already implemented for ARM,
which is faster than current single block cipher routine used
for GCM
It does not address the acceleration of GHASH function of GCM,
which can be a future task, still we can see immediate uplift of
performance (up to 4X)
Before this patch:
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
SM4-GCM 186432.92k 394234.05k 587916.46k 639365.12k 648486.91k 652924.25k
After the patch:
SM4-GCM 193924.87k 860940.35k 1696083.71k 2302548.31k 2580411.73k 2607398.91k
Signed-off-by: Daniel Hu <Daniel.Hu@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17814)
This header files are included by multiple other headers.
It's better to add define guards to prevent multi-inclusion.
Adhere to the coding style, all preprocessor directives inside
the guards gain a space.
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/17666)
Since the OPENSSL_strdup() may return NULL if allocation
fails, it should be better to check the return value.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17651)
Including e_os.h with a path from a header file doesn't work well on
certain exotic platform. It simply fails to build.
Since we don't seem to be able to stop ourselves, the better move is
to move e_os.h to an include directory that's part of the inclusion
path given to the compiler.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17641)
Add copyright to files that were missing it.
Update license from OpenSSL to Apache as needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17606)
The private key for rsa, dsa, dh and ecx was being included when the
selector was just the public key. (ec was working correctly).
This matches the documented behaviour.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17200)
Increase the block numbers to 8 for every iteration. Increase the hash
table capacity. Make use of EOR3 instruction to improve the performance.
This can improve performance 25-40% on out-of-order microarchitectures
with a large number of fast execution units, such as Neoverse V1. We also
see 20-30% performance improvements on other architectures such as the M1.
Assembly code reviewd by Tom Cosgrove (ARM).
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15916)
Assembly code reviewed by Shricharan Srivatsan <ssrivat@us.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16854)
This patch implements the SM4 optimization for ARM processor,
using SM4 HW instruction, which is an optional feature of
crypto extension for aarch64 V8.
Tested on some modern ARM micro-architectures with SM4 support, the
performance uplift can be observed around 8X~40X over existing
C implementation in openssl. Algorithms that can be parallelized
(like CTR, ECB, CBC decryption) are on higher end, with algorithm
like CBC encryption on lower end (due to inter-block dependency)
Perf data on Yitian-710 2.75GHz hardware, before and after optimization:
Before:
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
SM4-CTR 105787.80k 107837.87k 108380.84k 108462.08k 108549.46k 108554.92k
SM4-ECB 111924.58k 118173.76k 119776.00k 120093.70k 120264.02k 120274.94k
SM4-CBC 106428.09k 109190.98k 109674.33k 109774.51k 109827.41k 109827.41k
After (7.4x - 36.6x faster):
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
SM4-CTR 781979.02k 2432994.28k 3437753.86k 3834177.88k 3963715.58k 3974556.33k
SM4-ECB 937590.69k 2941689.02k 3945751.81k 4328655.87k 4459181.40k 4468692.31k
SM4-CBC 890639.88k 1027746.58k 1050621.78k 1056696.66k 1058613.93k 1058701.31k
Signed-off-by: Daniel Hu <Daniel.Hu@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17455)
Most of the DRGB code is run under lock from the EVP layer. This is relied
on to make the majority of TSAN operations safe. However, it is still necessary
to enable locking for all DRBGs created.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/17479)
There is risk to pass the gctx with NULL value to rsa_gen_set_params
which dereference gctx directly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17429)
There are missing checks of its return value in 8 different spots.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17154)
ctx may be NULL at 178 line
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17293)
Create new provider for RNDRRS. Modify support for rand_cpu to default to
RDRAND/RDSEED on x86 and RNDRRS on aarch64.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15361)
The match function (called OSSL_FUNC_keymgmt_match() in our documentation)
in our KEYMGMT implementations were interpretting the selector bits a
bit too strictly, so they get a bit relaxed to make it reasonable to
match diverse key contents.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16765)
MIN is a rather generic name and results in a name clash when trying to
port tianocore over to openssl 3.0. Use the usual ossl prefix and
rename the macro to ossl_min() to solve this.
CLA: trivial
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17219)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17181)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17181)
The passphrase callback data was not properly initialized.
Fixes#17054
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17181)
Also update OBJ_nid2obj.pod to document the possible return values.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17005)
These DER encoder implementations are supposed to be aliases for the
"type-specific" output structure, but were made different in so far
that they would output a "type specific" public key, which turns out
to be garbage (it called i2o_ECPublicKey()). The "type-specific"
output structure doesn't support that, and shouldn't.
Fixes#16977
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16983)
(cherry picked from commit 2cb802e16f)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16918)
The test-rand RNG was returning success when it had some but insufficient data.
Now, it returns failure and doesn't advance the data pointer.
The test-rand RNG was failing when a parent was specified. This case is now
ignored.
Fixes#16785
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16905)
Otherwise commands like openssl req -newkey sm2 fail silently without
reporting any error unless -sm3 option is added.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16833)
The GCM mode of the SM4 algorithm is specifieded by RFC8998.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16491)
This is adding robustness to the code. The fix to not mis-set the pointer
is in #16636.
Fixes#16631
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/16640)
Since EncryptedPrivateKeyInfo is a recognised structure, it's
reasonable to think that someone might want to specify it.
To be noted is that if someone specifies the structure PrivateKeyInfo
but has also passed a passphrase callback, the result will still
become a EncryptedPrivateKeyInfo structure.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16466)
When the user expects to load a certificate or a CRL through the
OSSL_STORE loading function, the 'file:' implementation sets the
corresponding structure names in the internal decoder context.
This is especially geared for PEM files, which often contain a mix of
objects, and password prompting should be avoided for objects that
need them, but aren't what the caller is looking for.
Fixes#16224
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16466)
The data structure wasn't given for recognised certificates or CRLs.
It's better, though, to specify it for those objects as well, so they
can be used to filter what actually gets decoded, which will be
helpful for our OSSL_STORE 'file:' scheme implementation.
Fixes#16224
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16466)
The x86_64 cross compiler says that 'unsigned long long' isn't the
same as 'unsigned __int64'. Sure, and considering that
providers/implementations/rands/seeding/rand_vms.c is specific VMS
only code, it's easy to just change the type to the exact same as
what's specified in the system headers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16497)
(cherry picked from commit 1ef526ef42)
The AES wrap cipher was return -1 on error from the provider rather than 0.
This is fixed.
There was a problem with the error handling in AES wrap which fell back to a
default "final error". This adds a fix for the error and more specific errors
for the different failure possibilities.
Fixes#16387
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16391)
Previously the length of the SM2 plaintext could be incorrectly calculated.
The plaintext length was calculated by taking the ciphertext length and
taking off an "overhead" value.
The overhead value was assumed to have a "fixed" element of 10 bytes.
This is incorrect since in some circumstances it can be more than 10 bytes.
Additionally the overhead included the length of two integers C1x and C1y,
which were assumed to be the same length as the field size (32 bytes for
the SM2 curve). However in some cases these integers can have an additional
padding byte when the msb is set, to disambiguate them from negative
integers. Additionally the integers can also be less than 32 bytes in
length in some cases.
If the calculated overhead is incorrect and larger than the actual value
this can result in the calculated plaintext length being too small.
Applications are likely to allocate buffer sizes based on this and therefore
a buffer overrun can occur.
CVE-2021-3711
Issue reported by John Ouyang.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Adding KRB5 test vector 'NextIV' values to evp_test data for AES CTS indicated that the CTS decrypt functions incorrectly returned the wrong IV. The returned IV should match the value returned by the encrypt methods.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16286)
The include is added before <CommonCrypto/CommonRandom.h>,
as required by older releases of the macOS developer tools.
Fixes#16248
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16258)
encode_key2text.c(689): error C4703: potentially uninitialized local pointer variable 'modulus_label' used
encode_key2text.c(691): error C4703: potentially uninitialized local pointer variable 'exponent_label' used
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12845)
This function needs to be power up tested as part of the FIPS validation and
thus it needs to be inside the provider boundary. This is realised by
introducing a new KDF "TLS13-KDF" which does the required massaging of
parameters but is otherwise functionally equivalent to HKDF.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/16203)
Word from the lab is:
The use of the derivation function is optional if either an approved
RBG or an entropy source provides full entropy output when entropy
input is requested by the DRBG mechanism. Otherwise, the derivation
function shall be used.
So our disallowing it's use was more than required.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/16096)
The flag_allow_md prevents setting a digest in params however
this is unnecessarily strict. If the digest is the same as the
one already set, we do not return an error.
Fixes#16071
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16076)
Fix memory leak if legacy test is skipped.
Using EVP_KDF_CTX_get_params() to get OSSL_KDF_PARAM_SIZE will now
return 0 if the returned size is 0.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15977)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15974)
The 'file:' store loader only understood DER natively. With all the
whatever to key decoders gone, direct support for other binary file
formats are gone, and we need to recreate them for this store loader.
With these changes, it now also understands MSBLOB and PVK files.
As a consequence, any store loader that handles some form of open file
data (such as a PEM object) can now simply pass that data back via
OSSL_FUNC_store_load()'s object callback. As long as libcrypto has
access to a decoder that can understand the data, the appropriate
OpenSSL object will be generated for it, even if the store loader sits
in a different provider than any decoder or keymgmt.
For example, an LDAP store loader, which typically finds diverse PEM
formatted blobs in the database, can simply pass those back via the
object callback, and let libcrypto do the rest of the work.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15981)
This makes the 'file:' store loader only read the file, and only decode
down to a base level binary format, and simply pass that blob of data
back to the OSSL_FUNC_store_load() object callback.
This offloads the decoding into specific OpenSSL types to libcrypto,
which takes away the issue of origins, which provider is it that holds
the key (or other future types of objects).
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15981)
When decoding a key and asking the keymgmt to import the key data, it
was told that the key data includes everything. This may not be true,
since the user may have specified a different selection, and some
keymgmts may want to be informed.
Our key decoders' export function, on the other hand, didn't care
either, and simply export anything they could, regardless.
In both cases, the selection that was specified by the user is now
passed all the way.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15934)
This is to avoid creating confusion where other PEM decoder
implementations may know better what PEM names that are unknown to us
actually mean.
Fixes#15929
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15930)
Previously all the SubjectPublicKeyInfo decoders were specific to a key
type. We would iterate over all them until a match was found for the correct
key type. Each one would fully decode the key before then testing whether
it was a match or not - throwing it away if not. This was very inefficient.
Instead we introduce a generic SubjectPublicKeyInfo decoder which figures
out what type of key is contained within it, before subsequently passing on
the data to a key type specific SubjectPublicKeyInfo decoder.
Fixes#15646
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15662)
This has us switch from the 'structure' "pkcs8" to "PrivateKeyInfo",
which is sensible considering we already have "SubjectPublicKeyInfo".
We also add "EncryptedPrivateKeyInfo", and use it for a special decoder
that detects and decrypts an EncryptedPrivateKeyInfo structured DER
blob into a PrivateKeyInfo structured DER blob and passes that on to
the next decoder implementation.
The result of this change is that PKCS#8 decryption should only happen
once per decoding instead of once for every expected key type.
Furthermore, this new decoder implementation sets the data type to the
OID of the algorithmIdentifier field, thus reducing how many decoder
implementations are tentativaly run further down the call chain.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15498)
Allocate at least one byte to distinguish a zero length key
from an unset key.
Fixes#15632
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15643)
Systems such as Tru64 ship with broken headers that
have _POSIX_TIMERS defined but empty.
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15598)
Fixes#15531
DES and TDES set this flag which could possibly be used by applications.
The gettable cipher param OSSL_CIPHER_PARAM_HAS_RAND_KEY has been added.
Note that EVP_CIPHER_CTX_rand_key() uses this flag.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15606)
Fixes#15548
Document OSSL_PKEY_PARAM_EC_PUB_X, OSSL_PKEY_PARAM_EC_PUB_Y and OSSL_PKEY_PARAM_DEFAULT_DIGEST
Added a section related to parameters for SM2.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15601)
Various different initialization sequences led to bugs on s390x due to caching
and processing during key setting. Since, e.g., the direction does not
necessarily have to be correct during initialization, this produced bugs in
s390x which were not present on other architectures. Fix this by recomputing
the function codes on the fly during updates and final operations.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15521)
They aren't needed at all any more, since the properties contain the
same information.
This also drops the parameter names OSSL_ENCODER_PARAM_OUTPUT_TYPE
and OSSL_ENCODER_PARAM_OUTPUT_STRUCTURE
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15570)
This was a poor substitute for using the name of the decoder implementation,
and since there is functionality to get the latter now, this parameter
can be dropped.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15570)
They aren't needed at all any more, since the properties contain the
same information.
This also drops the parameter names OSSL_DECODER_PARAM_INPUT_TYPE
and OSSL_DECODER_PARAM_INPUT_STRUCTURE.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15570)
This nicely reduces the number of files considered as fips
provider sources.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15609)
Fixes#15552
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15566)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14587)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14587)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14587)
The code to handle the cipher operation was already in the provider.
It just needed a OSSL_PARAM in order to set this into the algorithm.
EVP_CIPHER_CTX_set_flags() has been modified to pass the OSSL_PARAM.
Issue reported by Mark Powers from Acumen.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15496)
Currently we explicitly downgrade an EVP_PKEY to an EC_KEY and ask
the EC_KEY directly whether it was decoded from explicit parameters or not.
Instead we teach EVP_PKEYs to respond to a new parameter for this purpose.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15526)
Every inclusion directory related to a library we build need these two
files. That signals to any other module using anything from these
libraries what to expect in terms of case sensitivity as well as how
long symbol names are dealt with.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15341)
Using OSSL_STORE is too heavy and breaks things.
There were also needed various fixes mainly for missing proper
handling of the SM2 keys in the OSSL_DECODER.
Fixes#14788
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15045)
Remove a TODO that is no longer relevant and
drop some more non-fips sources from the fips checksums.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15191)
Where an object has multiple ex_data associated with it, then we free that
ex_data in order of priority (high priority first).
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14991)
This commit sets the error mark before calling d2i_X509_SIG
and clear it if that function call is successful.
The motivation for this is that if d2i_X509_SIG returns NULL then the
else clause will be entered and d2i_PKCS8_PRIV_KEY_INFO will be
called. If d2i_X509_SIG raised any errors those error will be on the
error stack when d2i_PKCS8_PRIV_KEY_INFO gets called, and even if it
returns successfully those errors will still be on the error stack.
We ran into this issue when upgrading Node.js to 3.0.0-alpha15.
More details can be found in the ref links below.
Refs: https://github.com/nodejs/node/issues/38373
Refs: https://github.com/danbev/learning-libcrypto/blob/master/notes/wrong-tag-issue2.md
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/15067)
Also add hints to SHA256_Init.pod and CHANGES.md how to replace SHA256() etc.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14741)
This helps compensating for deprecated functions such as HMAC()
and reduces clutter in the crypto lib, apps, and tests.
Also fixes memory leaks in generate_cookie_callback() of apps/lib/s_cb.c.
and replaces 'B<...>' by 'I<...>' where appropriate in HMAC.pod
Partially fixes#14628.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14664)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15130)
libimplementations.a was a nice idea, but had a few flaws:
1. The idea to have common code in libimplementations.a and FIPS
sensitive helper functions in libfips.a / libnonfips.a didn't
catch on, and we saw full implementation ending up in them instead
and not appearing in libimplementations.a at all.
2. Because more or less ALL algorithm implementations were included
in libimplementations.a (the idea being that the appropriate
objects from it would be selected automatically by the linker when
building the shared libraries), it's very hard to find only the
implementation source that should go into the FIPS module, with
the result that the FIPS checksum mechanism include source files
that it shouldn't
To mitigate, we drop libimplementations.a, but retain the idea of
collecting implementations in static libraries. With that, we not
have:
libfips.a
Includes all implementations that should become part of the FIPS
provider.
liblegacy.a
Includes all implementations that should become part of the legacy
provider.
libdefault.a
Includes all implementations that should become part of the
default and base providers.
With this, libnonfips.a becomes irrelevant and is dropped.
libcommon.a is retained to include common provider code that can be
used uniformly by all providers.
Fixes#15157
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15171)
It was discovered that eddsa.c exist in two places, here and in
crypto/ec/curve448/, which would result in a file name clash if they
ever end up in the same library.
To mitigate, we rename the copy in providers/implementations/signatures
to have '_sig' in the file name, and do the same with all other source
files in this directory, for consistency.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15171)
Add OSSL_STORE_PARAM_INPUT_TYPE and make it possible to be
set when OSSL_STORE_open_ex() or OSSL_STORE_attach() is called.
The input type format is enforced only in case the file
type file store is used.
By default we use FORMAT_UNDEF meaning the input type
is not enforced.
Fixes#14569
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15100)
Setting an output length higher than 8191 was causing a buffer overflow.
This was reported by Acumen (FIPS lab).
The max output size has increased to ~2M and it now checks this during set_parameters.
The encoder related functions now pass in the maximum size of the output buffer so they
can correctly check their size. kmac_bytepad_encode_key() calls bytepad twice in
order to calculate and check the length before encoding.
Note that right_encode() is currently only used in one place but this
may change if other algorithms are supported (such as TupleHash).
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15106)
In the provider file: scheme loader implementation, the OSSL_DECODER_CTX
was set up with all sorts of implementations, even if the caller has
declared a limited expectation on what should be loaded, which means
that even though a certificate is expected, all the diverse decoders
to produce an EVP_PKEY are added to the decoding change.
This optimization looks more closely at the expected type, and only
adds the EVP_PKEY related decoder implementations to the chain if
there is no expectation, or if the expectation is one of
OSSL_STORE_INFO_PARAMS, OSSL_STORE_INFO_PUBKEY, OSSL_STORE_INFO_PKEY.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15066)
Fix dh_rfc5114 option in genpkey.
Fixes#14145Fixes#13956Fixes#13952Fixes#13871Fixes#14054Fixes#14444
Updated documentation for app to indicate what options are available for
DH and DHX keys.
DH and DHX now have different keymanager gen_set_params() methods.
Added CHANGES entry to indicate the breaking change.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14883)
We do here like in all other decoder implementations, drop all errors
that were caused by a failing asn1_d2i_read_bio(), as it's most likely
to mean that the input isn't DER, and another decoder implementation,
if there is any left, should have a go.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/15008)
This includes the special decoder used in our STOREMGMT 'file:' implementation
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14834)
The OIDs were extracted with the help of libcrypto's ASN1 OID database.
While doing this, we move all the names strings to macro definitions,
to avoid duplication and conflicting names declarations. Those macros
are all in providers/implementations/include/prov/names.h
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14498)
We had some FIPS global variables that were based on values from the
config file. In theory if two instances of the fips module are loaded
they could be based on different config files which would cause this to
fail. Instead we store them in the FIPS_GLOBAL structure.
Fixes#14364
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14814)
To avoid mutating key data add OSSL_FUNC_KEYMGMT_DUP function
to the provider API and implement it for all asym-key key
managements.
Use it when copying everything to an empty EVP_PKEY
which is the case with EVP_PKEY_dup().
Fixes#14658
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14793)
Fixes#14808
Validation checks were moved into EVP_PKEY_derive_set_peer() which broke
an external negative test. Originally the old code was semi working by checking the peers public key was in the range of other parties p. It was not actually ever
checking that the domain parameters were consistent between the 2
parties. It now checks the parameters match as well as validating the
peers public key.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14823)
This is necessary to keep compatibility with 1.1.1 implementation
of the CBC, OFB, and CFB mode ciphers.
Fixes#14704
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14811)
Previously there was an off by two error allowing a stack buffer overrun.
Avoided this by allocating a correct sized buffer on the stack. A side effect
is that the maximum size of the customisation string can be increased.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14810)
As ossl_cipher_generic dosen't support to set key length, and
"openssl speed aes-(128|192|256)-cbc" tests fail. A small fix by
adding OSSL_CIPHER_PARAM_KEYLEN params.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14777)
Improve the ossl_rsa_check_key() to prevent non-signature
operations with PSS keys.
Do not invoke the EVP_PKEY controls for CMS and PKCS#7 anymore
as they are not needed anymore and deprecate them.
Fixes#14276
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/14760)
This corresponds to the |info| field in EVP_PKEY_ASN1_METHOD, as well
as the generic use of OBJ_nid2ln() as a one line description.
We also add the base functionality to make use of this field.
Fixes#14514
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14656)
The parameter makes the dsa key encoder to skip saving the DSA
key parameters similarly to what the legacy dsa key encoder did.
Fixes#14362
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14746)
We've encountered some scenarios that need to use more than 1 kB of
data as the HKDF-Expand() "info" argument (which, per RFC 5869,
contains "optional context and application specific information").
Since HKDF_MAXBUF is used to size an array in the HKDF_PKEY_CTX
structure, this adds 1 kB of memory footprint to each EVP_PKEY_CTX
used for HKDF.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14649)
In 1.1.1 the ctrl EVP_PKEY_CTRL_RSA_KEYGEN_BITS would fail immediately
if the number of bits was too small. In 3.0 it always succeeds, and only
fails later during the key generation stage.
We fix that so that it fails early like it used to in 1.1.1.
Note that in 1.1.1 it fails with a -2 return code. That is not the case
in 3.0 and has not been addressed here (see #14442)
Fixes#14443
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14702)
Fixes#14481
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14684)
The legacy implementation would print the ASN.1 value of the trailerfield,
except when it wasn't set (i.e. is default).
For better consistency, we now always print the ASN.1 value, both in the
legacy and the provided implementation.
Fixes#14363
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14676)
To make this cleaner, decoder_ms2key.c is split into decoder_msblob2key.c
and decoder_pvk2key.c.
This required a great deal of refactoring of crypto/pem/pvkfmt.c, to
make cleaner internal functions that our decoder implementations can
use.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
This required refactoring a number of functions from the diverse
EVP_PKEY_ASN1_METHOD implementations to become shared backend
functions. It also meant modifying a few of them to return pointers
to our internal RSA / DSA/ DH / EC_KEY, ... structures instead of
manipulating an EVP_PKEY pointer directly, letting the caller do the
latter.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
The OSSL_FUNC_KEYMGMT_LOAD function for both plain RSA and RSA-PSS
keys now also check that the key to be loaded is the correct type,
and refuse to load it if it's not.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
This makes it possible to use d2i_<TYPE>_PUBKEY instead of the generic
d2i_PUBKEY()
This required adding a number of new d2i_<TYPE>_PUBKEY functions.
These are all kept internal.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
The decoding of DER into keys with keytype specific routines depended
entirely on the absence of the generic algo specific C type from
EVP_PKEYs. That is not necessary, and may even prove to be a bit of a
disadvantage, depending on what libcrypto has to offer in terms of
type specific d2i functionality for different kinds of input
structures.
To remedy, we try with all available type specific functions first,
and only turn to the general d2i functions (those that return an
EVP_PKEY) as a last resort.
Furthermore, there are cases where the decoder might not get the key
type it expected. This may happen when certain key types that share
the same OpenSSL structure may be mixed up somehow. The known cases
are EC vs SM2 and RSA vs RSA-PSS.
To remedy, we add the possibility to specify a checking function that
can check if the key that was decoded meets decoder expectations.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
Dmitry Belyavskiy
Tomas Mraz
cuishuang
Daniel Hu
Pauli
Hugo Landau
Weiguo Li
Jiasheng Jiang
Andrey Matyukov
Danny Tsen
Richard Levitte
Todd Short
slontis
Zhou Qingyang
XiaokangQian
Peiwei Hu
Dr. David von Oheimb
Dimitris Apostolou
x2018
ABautkin
Orr Toledano
Gerd Hoffmann
Patrick Uiterwijk
Matt Caswell
Tianjia Zhang
Ulrich Müller
David Carlier
David Bohman
Kelvin Lee
Larkin Nickle
Juergen Christ
Jon Spillett
Rich Salz
Daniel Bevenius
Pauli
Fangming.Fang
Benjamin Kaduk