[Why]
They make it more difficult to compile RabbitMQ on Windows. They were
probably useful at the time of the switch to a monorepository but I
don't see their need anymore.
rabbit_channel may use amqp_channel as the writer.
When terminating, rabbit_channel sends a `flush` message
to its writer. If amqp_channel is in use, that led to
a `function_clause` crash.
Provides a specific function to fix client ssl options, i.e.: apply all
fixes that are applied for TLS listeneres and clients on previous
versions but also sets `cacerts` option to CA certificates obtained by
`public_key:cacerts_get`, only when no `cacertfile` or `cacerts` are
provided.
Because `ct_master` is yet another Erlang node, and it is used
to run multiple CT nodes, meaning it is in a cluster of CT
nodes, the tests that change the net_ticktime could not
work properly anymore. This is because net_ticktime must
be the same value across the cluster.
The same value had to be set for all tests in order to solve
this. This is why it was changed to 5s across the board. The
lower net_ticktime was used in most places to speed up tests
that must deal with cluster failures, so that value is good
enough for these cases.
One test in amqp_client was using the net_ticktime to test
the behavior of the direct connection timeout with varying
net_ticktime configurations. The test now mocks the
`net_kernel:get_net_ticktime()` function to achieve the
same result.
This has no real impact on performance[1] but should
make it clear which application can run the broker
and/or publish to Hex.pm. In particular, applications
that we can't run the broker from will now give up
early if we try to.
Note that while the broker can't normally run from the
amqp_client application's directory, it can run from
tests and some of the tests start the broker.
[1] on my machine
No real need to have two files, especially since it contains
only a few variable definitions. Plan is to only keep
separate files for larger features such as dist or run.
We don't need to duplicate so many patterns in so many
files since we have a monorepo (and want to keep it).
If I managed to miss something or remove something that
should stay, please put it back. Note that monorepo-wide
patterns should go in the top-level .gitignore file.
Other .gitignore files are for application or folder-
specific patterns.
Stats were not removed, including management UI stats
relating to FDs.
Web-MQTT and Web-STOMP configuration relating to FHC
were not removed.
The file_handle_cache itself must be kept until we
remove CQv1.
[Why]
Depending on the exit status of the writer process when a testcase calls
it, the exception reason might differ. From the actual error if the
writer was called before it handled the error, to `noproc` if it already
exited.
[How]
We match against several probable exception reasons that would signify a
success for the testcase.
[Why]
The writer process could still be exiting at the time flush is called.
For instance, the reason could be `{shutdown, _}`.
Also, with the conversion of the `rabbit_writer` to a gen_server, the
noproc reason would be `{noproc, _}`.
[How]
`flush_writer/1` is called in the channel `terminate/2` function, so we
don't really care about any writer errors at this point. Let's ignore
any exceptions.
... after `rabbit_writer` conversion to gen_server.
[Why]
The `rabbit_writer` being a regular gen_server now, it will stop with
the reason `{shutdown, Reason}`. Otherwise this would be considered a
crash by the supervision tree and it would log even more scary errors
and stacktraces.
[How]
If the reason is `{shutdown, _}`, we just unpack the embedded reason and
use it for the channel stop reason. This ensures the behavior of the
channel process doesn't change.
## What
Similar to Native MQTT in #5895, this commits implements Native AMQP 1.0.
By "native", we mean do not proxy via AMQP 0.9.1 anymore.
## Why
Native AMQP 1.0 comes with the following major benefits:
1. Similar to Native MQTT, this commit provides better throughput, latency,
scalability, and resource usage for AMQP 1.0.
See https://blog.rabbitmq.com/posts/2023/03/native-mqtt for native MQTT improvements.
See further below for some benchmarks.
2. Since AMQP 1.0 is not limited anymore by the AMQP 0.9.1 protocol,
this commit allows implementing more AMQP 1.0 features in the future.
Some features are already implemented in this commit (see next section).
3. Simpler, better understandable, and more maintainable code.
Native AMQP 1.0 as implemented in this commit has the
following major benefits compared to AMQP 0.9.1:
4. Memory and disk alarms will only stop accepting incoming TRANSFER frames.
New connections can still be created to consume from RabbitMQ to empty queues.
5. Due to 4. no need anymore for separate connections for publishers and
consumers as we currently recommended for AMQP 0.9.1. which potentially
halves the number of physical TCP connections.
6. When a single connection sends to multiple target queues, a single
slow target queue won't block the entire connection.
Publisher can still send data quickly to all other target queues.
7. A publisher can request whether it wants publisher confirmation on a per-message basis.
In AMQP 0.9.1 publisher confirms are configured per channel only.
8. Consumers can change their "prefetch count" dynamically which isn't
possible in our AMQP 0.9.1 implementation. See #10174
9. AMQP 1.0 is an extensible protocol
This commit also fixes dozens of bugs present in the AMQP 1.0 plugin in
RabbitMQ 3.x - most of which cannot be backported due to the complexity
and limitations of the old 3.x implementation.
This commit contains breaking changes and is therefore targeted for RabbitMQ 4.0.
## Implementation details
1. Breaking change: With Native AMQP, the behaviour of
```
Convert AMQP 0.9.1 message headers to application properties for an AMQP 1.0 consumer
amqp1_0.convert_amqp091_headers_to_app_props = false | true (default false)
Convert AMQP 1.0 Application Properties to AMQP 0.9.1 headers
amqp1_0.convert_app_props_to_amqp091_headers = false | true (default false)
```
will break because we always convert according to the message container conversions.
For example, AMQP 0.9.1 x-headers will go into message-annotations instead of application properties.
Also, `false` won’t be respected since we always convert the headers with message containers.
2. Remove rabbit_queue_collector
rabbit_queue_collector is responsible for synchronously deleting
exclusive queues. Since the AMQP 1.0 plugin never creates exclusive
queues, rabbit_queue_collector doesn't need to be started in the first
place. This will save 1 Erlang process per AMQP 1.0 connection.
3. 7 processes per connection + 1 process per session in this commit instead of
7 processes per connection + 15 processes per session in 3.x
Supervision hierarchy got re-designed.
4. Use 1 writer process per AMQP 1.0 connection
AMQP 0.9.1 uses a separate rabbit_writer Erlang process per AMQP 0.9.1 channel.
Prior to this commit, AMQP 1.0 used a separate rabbit_amqp1_0_writer process per AMQP 1.0 session.
Advantage of single writer proc per session (prior to this commit):
* High parallelism for serialising packets if multiple sessions within
a connection write heavily at the same time.
This commit uses a single writer process per AMQP 1.0 connection that is
shared across all AMQP 1.0 sessions.
Advantages of single writer proc per connection (this commit):
* Lower memory usage with hundreds of thousands of AMQP 1.0 sessions
* Less TCP and IP header overhead given that the single writer process
can accumulate across all sessions bytes before flushing the socket.
In other words, this commit decides that a reader / writer process pair
per AMQP 1.0 connection is good enough for bi-directional TRANSFER flows.
Having a writer per session is too heavy.
We still ensure high throughput by having separate reader, writer, and
session processes.
5. Transform rabbit_amqp1_0_writer into gen_server
Why:
Prior to this commit, when clicking on the AMQP 1.0 writer process in
observer, the process crashed.
Instead of handling all these debug messages of the sys module, it's better
to implement a gen_server.
There is no advantage of using a special OTP process over gen_server
for the AMQP 1.0 writer.
gen_server also provides cleaner format status output.
How:
Message callbacks return a timeout of 0.
After all messages in the inbox are processed, the timeout message is
handled by flushing any pending bytes.
6. Remove stats timer from writer
AMQP 1.0 connections haven't emitted any stats previously.
7. When there are contiguous queue confirmations in the session process
mailbox, batch them. When the confirmations are sent to the publisher, a
single DISPOSITION frame is sent for contiguously confirmed delivery
IDs.
This approach should be good enough. However it's sub optimal in
scenarios where contiguous delivery IDs that need confirmations are rare,
for example:
* There are multiple links in the session with different sender
settlement modes and sender publishes across these links interleaved.
* sender settlement mode is mixed and sender publishes interleaved settled
and unsettled TRANSFERs.
8. Introduce credit API v2
Why:
The AMQP 0.9.1 credit extension which is to be removed in 4.0 was poorly
designed since basic.credit is a synchronous call into the queue process
blocking the entire AMQP 1.0 session process.
How:
Change the interactions between queue clients and queue server
implementations:
* Clients only request a credit reply if the FLOW's `echo` field is set
* Include all link flow control state held by the queue process into a
new credit_reply queue event:
* `available` after the queue sends any deliveries
* `link-credit` after the queue sends any deliveries
* `drain` which allows us to combine the old queue events
send_credit_reply and send_drained into a single new queue event
credit_reply.
* Include the consumer tag into the credit_reply queue event such that
the AMQP 1.0 session process can process any credit replies
asynchronously.
Link flow control state `delivery-count` also moves to the queue processes.
The new interactions are hidden behind feature flag credit_api_v2 to
allow for rolling upgrades from 3.13 to 4.0.
9. Use serial number arithmetic in quorum queues and session process.
10. Completely bypass the rabbit_limiter module for AMQP 1.0
flow control. The goal is to eventually remove the rabbit_limiter module
in 4.0 since AMQP 0.9.1 global QoS will be unsupported in 4.0. This
commit lifts the AMQP 1.0 link flow control logic out of rabbit_limiter
into rabbit_queue_consumers.
11. Fix credit bug for streams:
AMQP 1.0 settlements shouldn't top up link credit,
only FLOW frames should top up link credit.
12. Allow sender settle mode unsettled for streams
since AMQP 1.0 acknowledgements to streams are no-ops (currently).
13. Fix AMQP 1.0 client bugs
Auto renewing credits should not be related to settling TRANSFERs.
Remove field link_credit_unsettled as it was wrong and confusing.
Prior to this commit auto renewal did not work when the sender uses
sender settlement mode settled.
14. Fix AMQP 1.0 client bugs
The wrong outdated Link was passed to function auto_flow/2
15. Use osiris chunk iterator
Only hold messages of uncompressed sub batches in memory if consumer
doesn't have sufficient credits.
Compressed sub batches are skipped for non Stream protocol consumers.
16. Fix incoming link flow control
Always use confirms between AMQP 1.0 queue clients and queue servers.
As already done internally by rabbit_fifo_client and
rabbit_stream_queue, use confirms for classic queues as well.
17. Include link handle into correlation when publishing messages to target queues
such that session process can correlate confirms from target queues to
incoming links.
18. Only grant more credits to publishers if publisher hasn't sufficient credits
anymore and there are not too many unconfirmed messages on the link.
19. Completely ignore `block` and `unblock` queue actions and RabbitMQ credit flow
between classic queue process and session process.
20. Link flow control is independent between links.
A client can refer to a queue or to an exchange with multiple
dynamically added target queues. Multiple incoming links can also fan
in to the same queue. However the link topology looks like, this
commit ensures that each link is only granted more credits if that link
isn't overloaded.
21. A connection or a session can send to many different queues.
In AMQP 0.9.1, a single slow queue will lead to the entire channel, and
then entire connection being blocked.
This commit makes sure that a single slow queue from one link won't slow
down sending on other links.
For example, having link A sending to a local classic queue and
link B sending to 5 replica quorum queue, link B will naturally
grant credits slower than link A. So, despite the quorum queue being
slower in confirming messages, the same AMQP 1.0 connection and session
can still pump data very fast into the classic queue.
22. If cluster wide memory or disk alarm occurs.
Each session sends a FLOW with incoming-window to 0 to sending client.
If sending clients don’t obey, force disconnect the client.
If cluster wide memory alarm clears:
Each session resumes with a FLOW defaulting to initial incoming-window.
23. All operations apart of publishing TRANSFERS to RabbitMQ can continue during cluster wide alarms,
specifically, attaching consumers and consuming, i.e. emptying queues.
There is no need for separate AMQP 1.0 connections for publishers and consumers as recommended in our AMQP 0.9.1 implementation.
24. Flow control summary:
* If queue becomes bottleneck, that’s solved by slowing down individual sending links (AMQP 1.0 link flow control).
* If session becomes bottleneck (more unlikely), that’s solved by AMQP 1.0 session flow control.
* If connection becomes bottleneck, it naturally won’t read fast enough from the socket causing TCP backpressure being applied.
Nowhere will RabbitMQ internal credit based flow control (i.e. module credit_flow) be used on the incoming AMQP 1.0 message path.
25. Register AMQP sessions
Prefer local-only pg over our custom pg_local implementation as
pg is a better process group implementation than pg_local.
pg_local was identified as bottleneck in tests where many MQTT clients were disconnected at once.
26. Start a local-only pg when Rabbit boots:
> A scope can be kept local-only by using a scope name that is unique cluster-wide, e.g. the node name:
> pg:start_link(node()).
Register AMQP 1.0 connections and sessions with pg.
In future we should remove pg_local and instead use the new local-only
pg for all registered processes such as AMQP 0.9.1 connections and channels.
27. Requeue messages if link detached
Although the spec allows to settle delivery IDs on detached links, RabbitMQ does not respect the 'closed'
field of the DETACH frame and therefore handles every DETACH frame as closed. Since the link is closed,
we expect every outstanding delivery to be requeued.
In addition to consumer cancellation, detaching a link therefore causes in flight deliveries to be requeued.
Note that this behaviour is different from merely consumer cancellation in AMQP 0.9.1:
"After a consumer is cancelled there will be no future deliveries dispatched to it. Note that there can
still be "in flight" deliveries dispatched previously. Cancelling a consumer will neither discard nor requeue them."
[https://www.rabbitmq.com/consumers.html#unsubscribing]
An AMQP receiver can first drain, and then detach to prevent "in flight" deliveries
28. Init AMQP session with BEGIN frame
Similar to how there can't be an MQTT processor without a CONNECT
frame, there can't be an AMQP session without a BEGIN frame.
This allows having strict dialyzer types for session flow control
fields (i.e. not allowing 'undefined').
29. Move serial_number to AMQP 1.0 common lib
such that it can be used by both AMQP 1.0 server and client
30. Fix AMQP client to do serial number arithmetic.
31. AMQP client: Differentiate between delivery-id and transfer-id for better
understandability.
32. Fix link flow control in classic queues
This commit fixes
```
java -jar target/perf-test.jar -ad false -f persistent -u cq -c 3000 -C 1000000 -y 0
```
followed by
```
./omq -x 0 amqp -T /queue/cq -D 1000000 --amqp-consumer-credits 2
```
Prior to this commit, (and on RabbitMQ 3.x) the consuming would halt after around
8 - 10,000 messages.
The bug was that in flight messages from classic queue process to
session process were not taken into account when topping up credit to
the classic queue process.
Fixes#2597
The solution to this bug (and a much cleaner design anyway independent of
this bug) is that queues should hold all link flow control state including
the delivery-count.
Hence, when credit API v2 is used the delivery-count will be held by the
classic queue process, quorum queue process, and stream queue client
instead of managing the delivery-count in the session.
33. The double level crediting between (a) session process and
rabbit_fifo_client, and (b) rabbit_fifo_client and rabbit_fifo was
removed. Therefore, instead of managing 3 separate delivery-counts (i. session,
ii. rabbit_fifo_client, iii. rabbit_fifo), only 1 delivery-count is used
in rabbit_fifo. This is a big simplification.
34. This commit fixes quorum queues without bumping the machine version
nor introducing new rabbit_fifo commands.
Whether credit API v2 is used is solely determined at link attachment time
depending on whether feature flag credit_api_v2 is enabled.
Even when that feature flag will be enabled later on, this link will
keep using credit API v1 until detached (or the node is shut down).
Eventually, after feature flag credit_api_v2 has been enabled and a
subsequent rolling upgrade, all links will use credit API v2.
This approach is safe and simple.
The 2 alternatives to move delivery-count from the session process to the
queue processes would have been:
i. Explicit feature flag credit_api_v2 migration function
* Can use a gen_server:call and only finish migration once all delivery-counts were migrated.
Cons:
* Extra new message format just for migration is required.
* Risky as migration will fail if a target queue doesn’t reply.
ii. Session always includes DeliveryCountSnd when crediting to the queue:
Cons:
* 2 delivery counts will be hold simultaneously in session proc and queue proc;
could be solved by deleting the session proc’s delivery-count for credit-reply
* What happens if the receiver doesn’t provide credit for a very long time? Is that a problem?
35. Support stream filtering in AMQP 1.0 (by @acogoluegnes)
Use the x-stream-filter-value message annotation
to carry the filter value in a published message.
Use the rabbitmq:stream-filter and rabbitmq:stream-match-unfiltered
filters when creating a receiver that wants to filter
out messages from a stream.
36. Remove credit extension from AMQP 0.9.1 client
37. Support maintenance mode closing AMQP 1.0 connections.
38. Remove AMQP 0.9.1 client dependency from AMQP 1.0 implementation.
39. Move AMQP 1.0 plugin to the core. AMQP 1.0 is enabled by default.
The old rabbitmq_amqp1_0 plugin will be kept as a no-op plugin to prevent deployment
tools from failing that execute:
```
rabbitmq-plugins enable rabbitmq_amqp1_0
rabbitmq-plugins disable rabbitmq_amqp1_0
```
40. Breaking change: Remove CLI command `rabbitmqctl list_amqp10_connections`.
Instead, list both AMQP 0.9.1 and AMQP 1.0 connections in `list_connections`:
```
rabbitmqctl list_connections protocol
Listing connections ...
protocol
{1, 0}
{0,9,1}
```
## Benchmarks
### Throughput & Latency
Setup:
* Single node Ubuntu 22.04
* Erlang 26.1.1
Start RabbitMQ:
```
make run-broker PLUGINS="rabbitmq_management rabbitmq_amqp1_0" FULL=1 RABBITMQ_SERVER_ADDITIONAL_ERL_ARGS="+S 3"
```
Predeclare durable classic queue cq1, durable quorum queue qq1, durable stream queue sq1.
Start client:
https://github.com/ssorj/quiverhttps://hub.docker.com/r/ssorj/quiver/tags (digest 453a2aceda64)
```
docker run -it --rm --add-host host.docker.internal:host-gateway ssorj/quiver:latest
bash-5.1# quiver --version
quiver 0.4.0-SNAPSHOT
```
1. Classic queue
```
quiver //host.docker.internal//amq/queue/cq1 --durable --count 1m --duration 10m --body-size 12 --credit 1000
```
This commit:
```
Count ............................................. 1,000,000 messages
Duration ............................................... 73.8 seconds
Sender rate .......................................... 13,548 messages/s
Receiver rate ........................................ 13,547 messages/s
End-to-end rate ...................................... 13,547 messages/s
Latencies by percentile:
0% ........ 0 ms 90.00% ........ 9 ms
25% ........ 2 ms 99.00% ....... 14 ms
50% ........ 4 ms 99.90% ....... 17 ms
100% ....... 26 ms 99.99% ....... 24 ms
```
RabbitMQ 3.x (main branch as of 30 January 2024):
```
---------------------- Sender ----------------------- --------------------- Receiver ---------------------- --------
Time [s] Count [m] Rate [m/s] CPU [%] RSS [M] Time [s] Count [m] Rate [m/s] CPU [%] RSS [M] Lat [ms]
----------------------------------------------------- ----------------------------------------------------- --------
2.1 130,814 65,342 6 73.6 2.1 3,217 1,607 0 8.0 511
4.1 163,580 16,367 2 74.1 4.1 3,217 0 0 8.0 0
6.1 229,114 32,767 3 74.1 6.1 3,217 0 0 8.0 0
8.1 261,880 16,367 2 74.1 8.1 67,874 32,296 8 8.2 7,662
10.1 294,646 16,367 2 74.1 10.1 67,874 0 0 8.2 0
12.1 360,180 32,734 3 74.1 12.1 67,874 0 0 8.2 0
14.1 392,946 16,367 3 74.1 14.1 68,604 365 0 8.2 12,147
16.1 458,480 32,734 3 74.1 16.1 68,604 0 0 8.2 0
18.1 491,246 16,367 2 74.1 18.1 68,604 0 0 8.2 0
20.1 556,780 32,767 4 74.1 20.1 68,604 0 0 8.2 0
22.1 589,546 16,375 2 74.1 22.1 68,604 0 0 8.2 0
receiver timed out
24.1 622,312 16,367 2 74.1 24.1 68,604 0 0 8.2 0
quiver: error: PlanoProcessError: Command 'quiver-arrow receive //host.docker.internal//amq/queue/cq1 --impl qpid-proton-c --duration 10m --count 1m --rate 0 --body-size 12 --credit 1000 --transaction-size 0 --timeout 10 --durable --output /tmp/quiver-otujr23y' returned non-zero exit status 1.
Traceback (most recent call last):
File "/usr/local/lib/quiver/python/quiver/pair.py", line 144, in run
_plano.wait(receiver, check=True)
File "/usr/local/lib/quiver/python/plano/main.py", line 1243, in wait
raise PlanoProcessError(proc)
plano.main.PlanoProcessError: Command 'quiver-arrow receive //host.docker.internal//amq/queue/cq1 --impl qpid-proton-c --duration 10m --count 1m --rate 0 --body-size 12 --credit 1000 --transaction-size 0 --timeout 10 --durable --output /tmp/quiver-otujr23y' returned non-zero exit status 1.
```
2. Quorum queue:
```
quiver //host.docker.internal//amq/queue/qq1 --durable --count 1m --duration 10m --body-size 12 --credit 1000
```
This commit:
```
Count ............................................. 1,000,000 messages
Duration .............................................. 101.4 seconds
Sender rate ........................................... 9,867 messages/s
Receiver rate ......................................... 9,868 messages/s
End-to-end rate ....................................... 9,865 messages/s
Latencies by percentile:
0% ....... 11 ms 90.00% ....... 23 ms
25% ....... 15 ms 99.00% ....... 28 ms
50% ....... 18 ms 99.90% ....... 33 ms
100% ....... 49 ms 99.99% ....... 47 ms
```
RabbitMQ 3.x:
```
---------------------- Sender ----------------------- --------------------- Receiver ---------------------- --------
Time [s] Count [m] Rate [m/s] CPU [%] RSS [M] Time [s] Count [m] Rate [m/s] CPU [%] RSS [M] Lat [ms]
----------------------------------------------------- ----------------------------------------------------- --------
2.1 130,814 65,342 9 69.9 2.1 18,430 9,206 5 7.6 1,221
4.1 163,580 16,375 5 70.2 4.1 18,867 218 0 7.6 2,168
6.1 229,114 32,767 6 70.2 6.1 18,867 0 0 7.6 0
8.1 294,648 32,734 7 70.2 8.1 18,867 0 0 7.6 0
10.1 360,182 32,734 6 70.2 10.1 18,867 0 0 7.6 0
12.1 425,716 32,767 6 70.2 12.1 18,867 0 0 7.6 0
receiver timed out
14.1 458,482 16,367 5 70.2 14.1 18,867 0 0 7.6 0
quiver: error: PlanoProcessError: Command 'quiver-arrow receive //host.docker.internal//amq/queue/qq1 --impl qpid-proton-c --duration 10m --count 1m --rate 0 --body-size 12 --credit 1000 --transaction-size 0 --timeout 10 --durable --output /tmp/quiver-b1gcup43' returned non-zero exit status 1.
Traceback (most recent call last):
File "/usr/local/lib/quiver/python/quiver/pair.py", line 144, in run
_plano.wait(receiver, check=True)
File "/usr/local/lib/quiver/python/plano/main.py", line 1243, in wait
raise PlanoProcessError(proc)
plano.main.PlanoProcessError: Command 'quiver-arrow receive //host.docker.internal//amq/queue/qq1 --impl qpid-proton-c --duration 10m --count 1m --rate 0 --body-size 12 --credit 1000 --transaction-size 0 --timeout 10 --durable --output /tmp/quiver-b1gcup43' returned non-zero exit status 1.
```
3. Stream:
```
quiver-arrow send //host.docker.internal//amq/queue/sq1 --durable --count 1m -d 10m --summary --verbose
```
This commit:
```
Count ............................................. 1,000,000 messages
Duration ................................................ 8.7 seconds
Message rate ........................................ 115,154 messages/s
```
RabbitMQ 3.x:
```
Count ............................................. 1,000,000 messages
Duration ............................................... 21.2 seconds
Message rate ......................................... 47,232 messages/s
```
### Memory usage
Start RabbitMQ:
```
ERL_MAX_PORTS=3000000 RABBITMQ_SERVER_ADDITIONAL_ERL_ARGS="+P 3000000 +S 6" make run-broker PLUGINS="rabbitmq_amqp1_0" FULL=1 RABBITMQ_CONFIG_FILE="rabbitmq.conf"
```
```
/bin/cat rabbitmq.conf
tcp_listen_options.sndbuf = 2048
tcp_listen_options.recbuf = 2048
vm_memory_high_watermark.relative = 0.95
vm_memory_high_watermark_paging_ratio = 0.95
loopback_users = none
```
Create 50k connections with 2 sessions per connection, i.e. 100k session in total:
```go
package main
import (
"context"
"log"
"time"
"github.com/Azure/go-amqp"
)
func main() {
for i := 0; i < 50000; i++ {
conn, err := amqp.Dial(context.TODO(), "amqp://nuc", &amqp.ConnOptions{SASLType: amqp.SASLTypeAnonymous()})
if err != nil {
log.Fatal("dialing AMQP server:", err)
}
_, err = conn.NewSession(context.TODO(), nil)
if err != nil {
log.Fatal("creating AMQP session:", err)
}
_, err = conn.NewSession(context.TODO(), nil)
if err != nil {
log.Fatal("creating AMQP session:", err)
}
}
log.Println("opened all connections")
time.Sleep(5 * time.Hour)
}
```
This commit:
```
erlang:memory().
[{total,4586376480},
{processes,4025898504},
{processes_used,4025871040},
{system,560477976},
{atom,1048841},
{atom_used,1042841},
{binary,233228608},
{code,21449982},
{ets,108560464}]
erlang:system_info(process_count).
450289
```
7 procs per connection + 1 proc per session.
(7 + 2*1) * 50,000 = 450,000 procs
RabbitMQ 3.x:
```
erlang:memory().
[{total,15168232704},
{processes,14044779256},
{processes_used,14044755120},
{system,1123453448},
{atom,1057033},
{atom_used,1052587},
{binary,236381264},
{code,21790238},
{ets,391423744}]
erlang:system_info(process_count).
1850309
```
7 procs per connection + 15 per session
(7 + 2*15) * 50,000 = 1,850,000 procs
50k connections + 100k session require
with this commit: 4.5 GB
in RabbitMQ 3.x: 15 GB
## Future work
1. More efficient parser and serializer
2. TODO in mc_amqp: Do not store the parsed message on disk.
3. Implement both AMQP HTTP extension and AMQP management extension to allow AMQP
clients to create RabbitMQ objects (queues, exchanges, ...).
Fixes#9371
Since each AMQP 1.0 connection opens several direct AMQP connections, we
must assign each direct connection a unique name to prevent multiple
entries in the `connection_created_stats` table.
Also, use `pg_local` to track AMQP 1.0 connections instead of walking
the supervisor trees.
Nuke authz_backends from connection created event 💥
Fix regex for connection name because UniqueId is part of it now (channel number)
* Check additional applications when comparing bazel and make results
* Sync bazel/make for amqp_client
* Do not fail-fast in build system comparison
* promethus -> prometheus
* Regenerate BUILD.redbug
* When comparing build systems & .app files ignore empty 'registered'
It's listed as a required key in
https://www.erlang.org/doc/man/app.html, but the same docs state the
default is "[]". It seems to ignore it if it's empty.
* Copy bazel/BUILD.osiris from BUILD.bazel in the osiris repo
Normally it would be generated with `bazel run gazelle-update-repos --
-args osiris@1.5.1=github.com/rabbitmq/osiris@v1.5.1`, but in this
case we just want to match it's compilation with erlang.mk with some
manual tweaks.
* Use elixir 1.15, otherwise mix format fails
* Sync bazel/make for rabbitmq_web_dispatch, rabbitmq_management_agent
Currently it is not possible for an AMQP 1.0 to make find
out a message is unroutable as it is settled with the
accepted state. This is because the current implementation
relies only on the publish confirms AMQP 091 extension.
This commit changes this by settling the message with the
released state. It uses the mandatory flag mechanism from
AMQP 091 and "internally" extends it to provide not only
the message in the callback, but the publishing sequence
as well. This applies only for AMQP 1.0, not for other
cases. Publish confirms and the mandatory flag are used
in conjonction in this case.
References #7823
Fixes#8129
The query parameter `password` in an AMQP URI should only be used to set
a certificate password, *not* the login password. The login password is
set via the `amqp_authority` section as defined here -
https://www.rabbitmq.com/uri-spec.html
* Add test that demonstrates issue in #8129
* Modify code to fix test
Modify amqp_uri so that test passes
Bazel build files are now maintained primarily with `bazel run
gazelle`. This will analyze and merge changes into the build files as
necessitated by certain code changes (e.g. the introduction of new
modules).
In some cases there hints to gazelle in the build files, such as `#
gazelle:erlang...` or `# keep` comments. xref checks on plugins that
depend on the cli are a good example.
Jean-Sébastien Pédron
Michal Kuratczyk
Aitor Perez
Michael Klishin
Lois Soto Lopez
Loïc Hoguin
Rin Kuryloski
Michal Kuratczyk
David Ansari
Michael Klishin
Michael Klishin
Ariel Otilibili
Luke Bakken
Rin Kuryloski
Arnaud Cogoluègnes
Loïc Hoguin
Kjell Winblad
Alexey Lebedeff