Update documentation for Task Execution

See gh-44926

Signed-off-by: Dmytro Nosan <dimanosan@gmail.com>

spring-boot-project/spring-boot-docs/src/docs/antora/modules/reference/pages/features/task-execution-and-scheduling.adoc

@@ -5,7 +5,76 @@ In the absence of an javadoc:java.util.concurrent.Executor[] bean in the context
 When virtual threads are enabled (using Java 21+ and configprop:spring.threads.virtual.enabled[] set to `true`) this will be a javadoc:org.springframework.core.task.SimpleAsyncTaskExecutor[] that uses virtual threads.
 Otherwise, it will be a javadoc:org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor[] with sensible defaults.
 
-If a custom `Executor` bean is present, you can request Spring Boot to auto-configure an `AsyncTaskExecutor` anyway, as follows:
+The auto-configured javadoc:org.springframework.core.task.AsyncTaskExecutor[] is used for the following integrations unless a custom javadoc:java.util.concurrent.Executor[] bean is defined:
+
+- Execution of asynchronous tasks using javadoc:org.springframework.scheduling.annotation.EnableAsync[format=annotation], unless a bean of type javadoc:org.springframework.scheduling.annotation.AsyncConfigurer[] is defined.
+- Asynchronous handling of javadoc:java.util.concurrent.Callable[] return values from controller methods in Spring for GraphQL.
+- Asynchronous request handling in Spring MVC.
+- Support for blocking execution in Spring WebFlux.
+- Utilized for inbound and outbound message channels in Spring WebSocket.
+- Acts as a bootstrap executor for JPA, based on the bootstrap mode of JPA repositories.
+
+While this approach works in most scenarios, Spring Boot allows you to override the auto-configured
+javadoc:org.springframework.core.task.AsyncTaskExecutor[].
+By default, when a custom javadoc:java.util.concurrent.Executor[] bean is registered, the auto-configured
+javadoc:org.springframework.core.task.AsyncTaskExecutor[] steps aside, and the custom javadoc:java.util.concurrent.Executor[] is used for regular task execution (via javadoc:org.springframework.scheduling.annotation.EnableAsync[format=annotation]).
+
+However, Spring MVC, Spring WebFlux, and Spring GraphQL all require a bean named `applicationTaskExecutor`.
+For Spring MVC and Spring WebFlux, this bean must be of type javadoc:org.springframework.core.task.AsyncTaskExecutor[], whereas Spring GraphQL does not enforce this type requirement.
+
+Spring WebSocket and JPA will use javadoc:org.springframework.core.task.AsyncTaskExecutor[] if either a single bean of this type is available or a bean named `applicationTaskExecutor` is defined.
+
+The following code snippet demonstrates how to register a custom javadoc:org.springframework.core.task.AsyncTaskExecutor[]
+to be used with Spring MVC, Spring WebFlux, Spring GraphQL, Spring WebSocket and JPA.
+
+include-code::TaskExecutionConfigurationExamples[tag=application-task-executor]
+
+[NOTE]
+====
+The `applicationTaskExecutor` bean will also be used for regular task execution if there is no
+javadoc:org.springframework.context.annotation.Primary[format=annotation] bean or a bean named `taskExecutor` of type javadoc:java.util.concurrent.Executor[]
+or javadoc:org.springframework.scheduling.annotation.AsyncConfigurer[] present in the application context.
+====
+
+[WARNING]
+====
+If neither the auto-configured `AsyncTaskExecutor` nor the `applicationTaskExecutor` bean is defined, the application defaults to a bean named `taskExecutor` for regular task execution (javadoc:org.springframework.scheduling.annotation.EnableAsync[format=annotation]), following Spring Framework's behavior.
+However, this bean will not be used for Spring MVC, Spring WebFlux, Spring GraphQL.
+It could, however, be used for Spring WebSocket or JPA if bean's type is javadoc:org.springframework.core.task.AsyncTaskExecutor[].
+====
+
+If your application needs multiple `Executor` beans for different integrations, such as one for regular task execution with javadoc:org.springframework.scheduling.annotation.EnableAsync[format=annotation]
+and other for Spring MVC, Spring WebFlux, Spring WebSocket and JPA you can configure them as follows.
+
+include-code::TaskExecutionConfigurationExamples[tag=multiple-task-executor]
+
+[TIP]
+====
+The auto-configured javadoc:org.springframework.boot.task.ThreadPoolTaskExecutorBuilder[] or
+javadoc:org.springframework.boot.task.SimpleAsyncTaskExecutorBuilder[] allow you to easily create instances of type javadoc:org.springframework.core.task.AsyncTaskExecutor[] that replicate the default behavior of auto-configuration.
+
+include-code::TaskExecutionConfigurationExamples[tag=executor-builder]
+====
+
+If a `taskExecutor` named bean is not an option, you can mark your bean as javadoc:org.springframework.context.annotation.Primary[format=annotation] or define an
+javadoc:org.springframework.scheduling.annotation.AsyncConfigurer[]  bean to specify the
+`Executor` responsible for handling regular task execution with javadoc:org.springframework.scheduling.annotation.EnableAsync[format=annotation].
+The following example demonstrates how to achieve this.
+
+include-code::TaskExecutionConfigurationExamples[tag=async-configurer]
+
+To register a custom javadoc:java.util.concurrent.Executor[] while keeping the auto-configured
+javadoc:org.springframework.core.task.AsyncTaskExecutor[], you can create a custom
+javadoc:java.util.concurrent.Executor[] bean and set the `defaultCandidate=false` attribute in its
+javadoc:org.springframework.context.annotation.Bean[format=annotation] annotation, as demonstrated in the following example:
+
+include-code::TaskExecutionConfigurationExamples[tag=default-candidate-task-executor]
+
+In that case, you will be able to javadoc:org.springframework.beans.factory.annotation.Autowired[format=annotation]
+your custom javadoc:java.util.concurrent.Executor[] into other components while retaining the auto-configured `AsyncTaskExecutor`.
+However, remember to use the javadoc:org.springframework.beans.factory.annotation.Qualifier[format=annotation] annotation alongside javadoc:org.springframework.beans.factory.annotation.Autowired[format=annotation].
+
+If for some reason, it is not possible, you can request Spring Boot to auto-configure an `AsyncTaskExecutor` anyway, as follows:
 
 [configprops,yaml]
 ----
@@ -15,31 +84,27 @@ spring:
       mode: force
 ----
 
-The auto-configured executor will be automatically used for:
+The auto-configured javadoc:org.springframework.core.task.AsyncTaskExecutor[]  will be used automatically for all integrations, even if a custom javadoc:java.util.concurrent.Executor[] bean is registered, including those marked as javadoc:org.springframework.context.annotation.Primary[format=annotation].
+These integrations include:
 
-- Asynchronous task execution (`@EnableAsync`), unless an javadoc:org.springframework.scheduling.annotation.AsyncConfigurer[] bean is present.
+- Asynchronous task execution (javadoc:org.springframework.scheduling.annotation.EnableAsync[format=annotation]), unless an javadoc:org.springframework.scheduling.annotation.AsyncConfigurer[] bean is present.
 - Spring for GraphQL's asynchronous handling of javadoc:java.util.concurrent.Callable[] return values from controller methods.
 - Spring MVC's asynchronous request processing.
 - Spring WebFlux's blocking execution support.
+- Utilized for inbound and outbound message channels in Spring WebSocket.
+- Acts as a bootstrap executor for JPA, based on the bootstrap mode of JPA repositories.
 
 [TIP]
 ====
-If you have defined a custom javadoc:java.util.concurrent.Executor[] in the context, both regular task execution (that is javadoc:org.springframework.scheduling.annotation.EnableAsync[format=annotation]) and Spring for GraphQL will use it.
-However, the Spring MVC and Spring WebFlux support will only use it if it is an javadoc:org.springframework.core.task.AsyncTaskExecutor[] implementation named `applicationTaskExecutor`.
-
 Depending on your target arrangement, you could set configprop:spring.task.execution.mode[] to `force` to auto-configure an `applicationTaskExecutor`, change your javadoc:java.util.concurrent.Executor[] into an javadoc:org.springframework.core.task.AsyncTaskExecutor[] or define both an javadoc:org.springframework.core.task.AsyncTaskExecutor[] and an javadoc:org.springframework.scheduling.annotation.AsyncConfigurer[] wrapping your custom javadoc:java.util.concurrent.Executor[].
-
-Another option is to define those beans explicitly.
-The auto-configured javadoc:org.springframework.boot.task.ThreadPoolTaskExecutorBuilder[] or javadoc:org.springframework.boot.task.SimpleAsyncTaskExecutorBuilder[] allow you to easily create instances that reproduce what the auto-configuration does by default.
 ====
 
-[NOTE]
+[WARNING]
 ====
-If multiple javadoc:java.util.concurrent.Executor[] beans are defined with configprop:spring.task.execution.mode[] to `force`, all the supported integrations look for a bean named `applicationTaskExecutor`.
-If the auto-configured `AsyncTaskExecutor` is not defined, only regular task execution fallbacks to a bean named `taskExecutor` to match Spring Framework's behavior.
+When `force` mode is enabled, `applicationTaskExecutor` will also be configured for regular task execution with javadoc:org.springframework.scheduling.annotation.EnableAsync[format=annotation], even if a javadoc:org.springframework.context.annotation.Primary[format=annotation] bean or a bean named `taskExecutor` of type javadoc:java.util.concurrent.Executor[] is present.
+The only way to override the `Executor` for regular tasks is by registering an javadoc:org.springframework.scheduling.annotation.AsyncConfigurer[] bean.
 ====
 
-
 When a javadoc:org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor[] is auto-configured, the thread pool uses 8 core threads that can grow and shrink according to the load.
 Those default settings can be fine-tuned using the `spring.task.execution` namespace, as shown in the following example:
 

spring-boot-project/spring-boot-docs/src/main/java/org/springframework/boot/docs/features/taskexecutionandscheduling/TaskExecutionConfigurationExamples.java

@@ -0,0 +1,98 @@
+/*
+ * Copyright 2012-2025 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      https://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package org.springframework.boot.docs.features.taskexecutionandscheduling;
+
+import java.util.concurrent.Executor;
+import java.util.concurrent.ExecutorService;
+import java.util.concurrent.Executors;
+import java.util.concurrent.ScheduledExecutorService;
+
+import org.springframework.beans.factory.annotation.Qualifier;
+import org.springframework.boot.task.SimpleAsyncTaskExecutorBuilder;
+import org.springframework.context.annotation.Bean;
+import org.springframework.context.annotation.Configuration;
+import org.springframework.core.task.SimpleAsyncTaskExecutor;
+import org.springframework.scheduling.annotation.AsyncConfigurer;
+import org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor;
+
+public class TaskExecutionConfigurationExamples {
+
+	// tag::default-candidate-task-executor[]
+	@Bean(defaultCandidate = false)
+	@Qualifier("scheduledExecutorService")
+	ScheduledExecutorService scheduledExecutorService() {
+		return Executors.newSingleThreadScheduledExecutor();
+	}
+	// end::default-candidate-task-executor[]
+
+	// tag::application-task-executor[]
+	@Bean("applicationTaskExecutor")
+	SimpleAsyncTaskExecutor applicationTaskExecutor() {
+		return new SimpleAsyncTaskExecutor("app-");
+	}
+	// end::application-task-executor[]
+
+	// tag::executor-builder[]
+	@Bean
+	SimpleAsyncTaskExecutor taskExecutor(SimpleAsyncTaskExecutorBuilder builder) {
+		return builder.build();
+	}
+	// end::executor-builder[]
+
+	static class MultipleTaskExecutor {
+
+		// tag::multiple-task-executor[]
+		@Bean("applicationTaskExecutor")
+		SimpleAsyncTaskExecutor applicationTaskExecutor() {
+			return new SimpleAsyncTaskExecutor("app-");
+		}
+
+		@Bean("taskExecutor")
+		ThreadPoolTaskExecutor taskExecutor() {
+			ThreadPoolTaskExecutor threadPoolTaskExecutor = new ThreadPoolTaskExecutor();
+			threadPoolTaskExecutor.setThreadNamePrefix("async-");
+			return threadPoolTaskExecutor;
+		}
+		// end::multiple-task-executor[]
+
+	}
+
+	// tag::async-configurer[]
+	@Configuration(proxyBeanMethods = false)
+	public class TaskExecutionConfiguration {
+
+		@Bean
+		AsyncConfigurer asyncConfigurer(ExecutorService executorService) {
+			return new AsyncConfigurer() {
+
+				@Override
+				public Executor getAsyncExecutor() {
+					return executorService;
+				}
+
+			};
+		}
+
+		@Bean
+		ExecutorService executorService() {
+			return Executors.newCachedThreadPool();
+		}
+
+	}
+	// end::async-configurer[]
+
+}