Add `AbstractApplicationContextRunner.prepare` which can be used to
test an `ApplicationContext` that has been prepared but not refreshed.
Closes gh-31302
Previously, classes were registered first which meant that their
conditions were evaluated before any initializers and bean
registrations were applied. This prevented the bean registrations and
initializers from affecting the outcome of the condition evaluation.
This commit inverts the ordering so that classes are not registerd,
and therefore their conditions are not evaluated, until after the
bean registrations and initializers have been applied.
Closes gh-31280
As seen in spring-projects/spring-graphql#375, Spring Boot should also
use "application/json" as the default MIME type but remain compatible
with "application/graphql+json" still if clients POST content with this
type or explicitly accept it.
Closes gh-30860
Previously, if spring.main.web-application-type was configured in
application.properties to servlet or reactive, setting
webEnvironment=NONE on @SpringBootTest would not work correctly and
a servlet or reactive web application context would be created
based on the value of spring.main.web-application-type.
This commit updates the test context bootstapper to set
spring.main.web-application-type to none when webEnvironment has been
set to none. This is done in the merged context configuration's
property source properties which are applied to the environment in a
high-precedence test property source that will override configuration
in application.properties.
Closes gh-29695
Previously, SpringBootContextLoader would configure its
SpringApplication with an ApplicationContextFactory that ignores
the WebApplicationType with which its called and instead returns a
hard-coded type of context based on the type of the
MergedContextConfiguration. This hard-coding would result in the
wrong type of context being used if a subsequent change was made to
the application's WebApplicationType, for example due to binding of
the spring.main.web-application-type configuration property.
This commit updates SpringBootContextLoader to configure
SpringApplication with an ApplicationContextFactory that takes the
WebApplicationType with which it is called into consideration.
Fixes gh-29170
As seen in spring-projects/spring-graphql#108, the GraphQL HTTP spec now
requires the "application/graphql+json" media type and accepts
"application/json" for backwards compatibility.
This commit updates the `RouterFunction` definition for the GraphQL HTTP
endpoints so that both types are accepted.
Closes gh-30407
This commit switches to 1.0.0-SNAPSHOT for Spring GraphQL, before its
upcoming 1.0.0-M6 version.
This commit adapts to the changes introduced in
spring-projects/spring-graphql#317 : now that `GraphQlClient` has been
introduced, `GraphQlTester` has been aligned with the new
infrastructure. The `@GraphQlTest` and `@SpringBootTest` testing support
is now using different variants for each.
All samples have been updated to use the proper GraphQL terminology, see
and spring-projects/spring-graphql#310 .
See gh-29637
Update `SpringBootContextLoader` so that when possible the
`SpringApplication` remains in control of creating the `Environment`
instance.
Prior to this commit, we would always create the `Environment` in the
`SpringBootContextLoader` and then call `setEnvironment` on the
`SpringApplication`. This meant that the `ApplicationEnvironment`
classes were not used and that `isCustomEnvironment` was set to `true`
so no conversion was applied.
With the updated code, an `ApplicationListener` is used to mutate the
`Environment` instance and add the required test property sources.
Fixes gh-29169
Refine the logic introduced in 64270eca to use a side-effect free
Environment implementation rather than converting the Environment early.
Early conversion can cause condition evaluation issues if
`src/test/resources/application.properties` files are bound to the
`SpringApplication`. Specifically the `spring.main.web-application-type`
property can change the `Environment` type which must happen before
conditions are evaluated.
Fixes gh-29169
Prior to this commit, the `GraphQlTesterContextCustomizer` would
register a `WebGraphQlTester` instance as a `GraphQlTester` bean., only
exposing the `GraphQlTester` type. This is not in line with the
documentation and also does not register the bean definition with the
most specific type.
With this issue, a `@SpringBootTest` integration test will not be
injected with a `WebGraphQlTester` if it asks one.
This commit ensures that the `WebGraphQlTester` is registered as such
and that all related classes are renamed as a result.
Fixes gh-29250
This commit adds the required infrastructure to auto-configure a
`GraphQlTester` or `WebGraphQlTester` in Spring Boot tests.
Specific annotations like `AutoConfigureGraphQlTester` and
`AutoConfigureWebGraphQlTester` will contribute pre-configured beans for
testing a GraphQL with the tester.
This also ships a `ContextCustomize` for contributing a `GraphQlTester`
in the case of a full `@SpringBootTest` integration test against a live
server.
See gh-29140
Update `SpringBootContextLoader` so that the active profiles
property source has a unique name. Prior to this commit, the
default name 'test' was used which could cause ordering issues
if other `@PropertySource` values were added to it later.
Closes gh-28804
Update `SpringBootContextLoader` so that the active profiles
property source has a unique name. Prior to this commit, the
default name 'test' was used which could cause ordering issues
if other `@PropertySource` values were added to it later.
Fixes gh-28776
This commit aligns `SpringBootTest`s to also use `ApplicationEnvironment`
instead of `StandardEnvironment`. This prevents the side-effect of active
profiles from `@ActiveProfiles` from being added to the environment when
doGetActiveProfiles is called. In this case, calling `addActiveProfiles()`
in the environment post processor would result in `@ActiveProfiles` being
added to the environment first, resulting in the wrong order.
The additional call to `setActiveProfiles()` is also not necessary when using
ApplicationEnvironment because that call was put in place to prevent the side-effect
which `ApplicationEnvironment` does not have.
Fixes gh-28530
A change [1] in Spring Framework 5.3 means that getUrl() on a
RequestEntity will throw an UnsupportedOperationException if the
entity was created using a template.
This commit updates TestRestTemplate to check for instances of
UriTemplateRequestEntity and to resolve the URI using the
entity's UriTemplateHandler instead of calling getUrl() directly.
Fixes gh-25097
[1] a0f4d81db7
This commit reinstanties the isWeBClientPresent() check so that
WebTestClientContextCustomizer is only added if a web client is
available.
See gh-24152
Previously, the web environment configured on `@SpringBootTest` was not
part of the context cache key. As a result, two test classes that has
identical configuration other than one using a MOCK web environment and
the other using a DEFINED_PORT web environment would share a context
when they should not do so. Classes that use MOCK and RANDOM_PORT were
not affected as the use of RANDOM_PORT results in a property for the
port being added to the environment.
This commit adds a new ContextCustomizer, SpringBootTestWebEnvironment,
that is used to capture the `webEnvironment` from `@SpringBootTest`
and use it in its hashCode and equals implementations. This fixes the
problem as all context customizers are evaluated when determing the
equality of two context cache keys.
Fixes gh-23085
Refactor `BootstrapRegistry` support following initial prototype work
with the Spring Cloud team.
This update splits the `BootstrapRegistry` API into `BootstrapRegistry`,
`BootstrapContext` and `ConfigurableBootstrapContext` interfaces and
moves it to the same package as `SpringApplication`.
A new `Bootstrapper` interface has been introduced that can be added
to the `SpringApplication` to customize the `BootstrapRegistry` before
it's used.
Closes gh-23326
Expose the `BootstrapRegisty` to both `ConfigDataLocationResolver` and
`ConfigDataLoader` implementations. The registry is exposed via the
context interfaces and may be used to reuse instances that are expensive
to create. It may also be used to ultimately register beans with the
`ApplicationContext`.
Closes gh-22956
The fix for gh-20916 updated DefinitionsParser so that the
ResolvableType for each MockBean or SpyBean field included the
implementation class from which the field was found. Where the field
was declared with a variable generic signature that was made constant
by its implementation class, this allowed the correct concrete type to
be determined. It also had the unintended side-effect of preventing two
test classes with identical `@MockBean` and `@SpyBean` configuration
from sharing a context as the resolvable types for their mock and spy
bean fields would now be different.
This commit updates DefinitionsParser to only include the
implementation class in the ResolvableType if the field's generic type
is variable. For cases where it is not variable, this restores the
behaviour prior to the fix for gh-20916.
Fixes gh-22566
Deprecate `ConfigFileApplicationListener` and provide a replacement
mechanism that supports arbitrary config data imports.
This commit updates the following areas:
- Extract `EnvironmentPostProcessor` invocation logic from the
`ConfigFileApplicationListener` to new dedicated listener. Also
providing support for `Log` injection.
- Extract `RandomPropertySource` adding logic from the
`ConfigFileApplicationListener` to a dedicated class.
- Migrate to the recently introduced `DefaultPropertiesPropertySource`
class when moving the defaultProperties `PropertySource`
- Replace processing logic with a phased approach to ensure that
profile enablement happens in a distinct phase and that profiles
can no longer be activated on an ad-hoc basis.
- Provide a more predictable and logical import order for processing
`application.properties` and `application.yml` files.
- Add support for a `spring.config.import` property which can be used
to import additional config data. Also provide a pluggable API
allowing third-parties to resolve and load locations themselves.
- Add `spring.config.activate.on-profile` support which replaces the
existing `spring.profiles` property.
- Add `spring.config.activate.on-cloud-platform` support which allows
a config data document to be active only on a given cloud platform.
- Support a `spring.config.use-legacy-processing` property allowing the
previous processing logic to be used.
Closes gh-22497
Co-authored-by: Madhura Bhave <mbhave@vmware.com>
Previously, Spring Boot's modules published Gradle Module Metadata
(GMM) the declared a platform dependency on spring-boot-dependencies.
This provided versions for each module's own dependencies but also had
they unwanted side-effect of pulling in spring-boot-dependencies
constraints which would influence the version of other dependencies
declared in the same configuration. This was undesirable as users
should be able to opt in to this level of dependency management, either
by using the dependency management plugin or by using Gradle's built-in
support via a platform dependency on spring-boot-dependencies.
This commit reworks how Spring Boot's build uses
spring-boot-dependencies and spring-boot-parent to provide its own
dependency management. Configurations that aren't seen by consumers are
configured to extend a dependencyManagement configuration that has an
enforced platform dependency on spring-boot-parent. This enforces
spring-boot-parent's version constraints on Spring Boot's build without
making them visible to consumers. To ensure that the versions that
Spring Boot has been built against are visible to consumers, the
Maven publication that produces pom files and GMM for the published
modules is configured to use the resolved versions from the module's
runtime classpath.
Fixes gh-21911
Update `SpringBootContextLoader` to both add `spring.profiles.active`
properties and to directly call `Environment.setActiveProfiles`.
The additional `setActiveProfiles` call prevents `AbstractEnvironment`
from accidentally loading `spring.profiles.active` properties directly
when `doGetActiveProfiles` is called.
Directly setting active profiles has only become necessary since we
started adding properties using the square bracket notation. Previously
we added a comma-separated list which would be picked up by both the
`AbstractEnvironment` and the `ConfigurationFileApplicationListener`.
Closes gh-21302
Update `SpringBootContextLoader` so that it correctly deals with an
`@ActiveProfiles` annotation that contains a comma.
Fixes gh-19537
Co-authored-by: Scott Frederick <sfrederick@pivotal.io>
Co-authored-by: Andy Wilkinson <awilkinson@pivotal.io>
For consistency with SpringApplication, this commit disables bean
overriding by default in ApplicationContextRunner. Bean overriding can
be enabled again using withAllowBeanDefinitionOverriding.
Closes gh-18019
This commit changes uses of ClassLoader.loadClass to Class.forName for
consistency with what was initiated in #19342 and better compatibility
with GraalVM.
Closes gh-19824
Update all dependencies declarations to use the form `scope(reference)`
rather than `scope reference`.
Prior to this commit we declared dependencies without parentheses unless
we were forced to add them due to an `exclude`.
Replace Gradle single quote strings with the double quote form
whenever possible. The change helps to being consistency to the
dependencies section where mostly single quotes were used, but
occasionally double quotes were required due to `${}` references.
This paves the way for publishing Gradle module metadata once the
problem caused by snapshot versions and our two-step publication
process has been addressed.
See gh-19609
This reverts commit b34a311d02 as,
having disabled the publishing of Gradle's module metadata (4f75ab5),
the changes are no longer needed.
See gh-19609
Previously, enforcedPlatform dependencies were using to pull in the
constraints defined in spring-boot-dependencies and
spring-boot-parent and applied them strictly so that the constrained
version had to be used. This worked as intended in Spring Boot's own
build but incorrectly enforced those same strict version requirements
on external consumers of Spring Boot's modules.
This commit reworks how Spring Boot defines its internal dependency
management so that platform dependencies are exposed to external
consumers while enforced platform dependencies are using internally.
See gh-19609
Prior to this commit, active profiles were being added to the Spring Boot
application environment by setting the `spring.profiles.active` property.
This could result in profiles getting parsed differently than other uses of `@ActiveProfiles`.
Setting the profiles directly in the `Environment` prevents this parsing.
See gh-19556
Previously, Maven's default behaviour was relied up which resulted
in the artifact ID being appended to each URL as it was inherited.
This behaviour can only be disabled in Maven 3.6 and later, a version
that we cannot use due to an incompatibility with the Flatten Plugin.
This commit works around Maven's default behaviour by defining
properties for the SCM URL, connection, and developer connection and
then explicitly defining the settings in each pom using these
properties. The explicit definition of the properties in each pom
prevents them being inherited from the parent, thereby disabling the
unwanted appending of the artifact ID to the URL.
Fixes gh-18328
Previously, when spying on a scoped bean the creation of the spy
would be performed using the scoped proxy. This would result in
the spy being unable to spy on any of the target bean's methods as
the scoped proxy's implementations of those methods would be final.
This commit updates MockitoPostProcessor so that the creation of the
spy and injection of the @SpyBean-annotated field is performed using
the scoped target. The scoped target has not be proxied so this
allows Mockito to spy on all of its methods.
Closes gh-17817
Extend `JsonContentAssert` with `hasJsonPath` and `doesNotHaveJsonPath`
methods which can be used to check the path regardless of the value it
may or may not contain.
Prior to this commit there wasn't an easy way to assert that the
Jackson `@JsonInclude(JsonInclude.Include.NON_NULL)` annotation was
applied since `assertDoesNotHavePathValue` would pass for both
`{"name" : null}` and `{}`.
Closes gh-17608
Meta-annotate `ClassPathExclusions` and `ClassPathOverrides` with
so that the `ModifiedClassPathExtension` no longer needs to be
used directly.
See gh-17491
Apply checkstyle rule to ensure that private and package private
classes do not have unnecessary public methods. Test classes have
also been unified as much as possible to use default scoped
inner-classes.
Closes gh-7316
Broaden the scope of customizer support so that instead of focusing
just on headers, we can now customize any outgoing `HttpClientRequest`.
Also update auto-configuration to automatically add any
`RestTemplateRequestCustomizer` beans to the builder.
See gh-17091
Update `RestTemplateBuilder` so that it is easier to apply custom
headers to the outgoing request. The update is particularly useful
for setting the `User-Agent` header, for example so that a GitHub
username can be used when calling `api.github.com`.
See gh-17091
Reduce the surface area of the public API by making the
`BasicAuthentication` and `BasicAuthenticationClientHttpRequestFactory`
class package private.
This commit also attempts to simplify `TestRestTemplate` by keeping
the `RestTemplateBuilder` and reusing it, rather than needing to deal
only with a `RestTemplate` instance.
See gh-17010
Update `RestTemplateBuilder` to use a custom request factory to add
authentication headers rather than an interceptor.
Prior to this commit, the use of the `BasicAuthenticationInterceptor`
interceptor could cause `OutOfMemoryError` whenever a large file is
uploaded.
See gh-17010
Split the JUnit 5 `OutputCapture` class into separate `OutputExtension`
and `CapturedOutput` classes. The JUnit 5 callback methods are now
contained only in the `OutputExtension` class so no longer pollute the
public API that users will interact with.
The `CapturedOutput` class has also been updated to capture System.err
and System.out separately to allow distinct assertions if required.
Closes gh-17029
Previously, due to a quirk in Spring Framework, it was necessary to use bean method
proxying in @Configuration classes that define one or more FactoryBeans. This quirk has
now been addressed so this commit disables bean method proxying where it is now no longer
needed.
Closes gh-16533
The `spring-boot-test` module has a dependency to TestNG to validate
some part of the test infrastructure but no tests are actually written
using TestNG. The presence of TestNG is a trigger for the maven surefire
plugin and it attempts to run tests using it.
This commit defines the explicit provider to use (JUnit 4)
Closes gh-16735
Polish contribution to use a factory method in `AbstractJsonMarshalTester`
rather than additional constructor arguments.
Also change the `JsonContent` tests so that the `Configuration` constructor
is package private. This keeps JsonPath classes out of our public API, at
the expense of limiting custom JsonPath configurations to just our code.
See gh-16629
Update `JacksonTester` so that the JsonPath instance is explicitly configured
with both a `JacksonJsonProvider` and a `JacksonMappingProvider`.
Prior to this commit, the handling of special characters was not symmetrical
between the serialization (handled via the JacksonTester) and the parsing (handled
via JsonPath) due to the fact that JsonPath used `SimpleJson` as its parser.
See gh-16629
Rework `AbstractApplicationContextRunner.withBean` methods to
align signatures as much as possible with those provided by
the `ApplicationContext`.
Also update the implementation to use a dedicate member
variable rather than adding initializers.
Closes gh-16011
This commit adds `withBean` methods to the `ApplicationContextRunner`
abstraction so that simple beans can be registered inline. This is a
nice alternative for cases where a inner configuration class has to be
defined for the purpose of creating a simple bean.
Closes gh-16011
This commit migrates `AnnotationConfigReactiveWebApplicationContext`
parent to the `GenericApplicationContext` abstraction. Any use of
`AnnotationConfigWebApplicationContext` is also removed as it also
inherits from the `AbstractRefreshableApplicationContext` outdated
hierarchy.
A new `AnnotationConfigServletWebApplicationContext` context is
introduced instead, extending from `GenericApplicationContext` and
providing the counter part of the reactive context for the Servlet-based
web app tests.
See gh-16096
Stephane Nicoll
Johnny Lim
Phillip Webb
Andy Wilkinson
Brian Clozel
Yanming Zhou
Madhura Bhave
Loïc Ledoyen
dreis2211
Leo Li
weixsun
Carlos Rafael de Oliveira Carneiro
Madhura Bhave
Tobias Gesellchen
Andy Wilkinson
Stephane Nicoll
XenoAmess
Phillip Webb
Andrii Hrytsiuk
Scott Frederick
Dmytro Nosan
kenneth
Roland Weisleder
Leonard Brünings
Sam Brannen
Lorenzo Dee
Ilya Lukyanovich
Diego Berrueta