Prior to this commit, running the bootBuildImage Gradle task on a
project configured for war packaging would result in a jar file being
built and used in the image instead of the war file. With this commit
an error will be thrown from the plugin in this case.
Fixes gh-24521
When a Configuration is copied, any before and after resolve actions
that are registered with its ResolvableDependencies are also copied
over. This means that, when a copied configuration is resolved the
resolution actions may be called on a ResolvableDependencies instances
that isn't the one to which they were added.
Previously, the above-described Gradle behaviour would result in
BootJar accessed the ResolvedConfiguration of a Configuration that may
not have yet been resolved. At best this would trigger Configuration
resolution and at worst it would fail. A failure could occur if the
configuration had been copied so that it could be made resolvable.
The afterResolve action would then try to access the
ResolvedConfiguration of the original Configuration. This would trigger
a resolution attempt that fails due to the original configuration being
marked as unresolvable.
This commit updates the afterResolve action in BootJar to check that
the ResolvableDependencies with which it is called matches the
ResolvableDependencies with which it was original registered. Only
when the two match, and therefore the configuration has actually been
resolved, does processing proceed.
Fixes gh-24072
Previously, when building a layered jar with Gradle, project
dependencies were treated the same as any other dependency, being
included in the dependencies or snapshot dependencies layer based
on their version.
This commit updates the default layering when using Gradle to include
project dependencies in the application layer by default. The DSL has
also been updated to allow their layer to be customized using new
includeProjectDependencies() and excludeProjectDependencies() methods
rather than relying on including and excluding them via a
group:artifact:version pattern.
Closes gh-23431
This commit adds options to the Maven and Gradle plugins to publish
to a Docker registry the image generated by the image-building goal
and task.
The Docker registry auth configuration added in an earlier commit
was modified to accept separate auth configs for the builder/run
image and the generated image, since it is likely these images will
be stored in separate registries or repositories with distinct
auth required for each.
Fixes gh-21001
Previously, BootJar would resolves all of a project's configurations
when building a layered jar. This was unnecessarily broad as it was
likely to include configurations that had contributed nothing to the
jar's classpath.
This commit replaces the configuration resolution with an afterResolve
action that populates the ResolvedDependencies in response to a
configuration being resolved. This allows the resolved dependencies to
be populated from all of the configurations that were resolved as part
of determining the jars classpath and no more.
Closes gh-23528
Prior to this commit, the bootBuildInfo was configured eagerly.
Configuring it lazily prevent this task from being configured when not
explicitly needed. Also, the 'classes' and 'bootJar' tasks are now
lazily configured, as the bootBuildInfo task was causing them to be
configured eagerly.
See gh-23435
This commit adds the ability to configure the Maven and Gradle
plugins to use a remote Docker daemon using build file
configuration, as an alternative to setting environment variables
to specify remote host connection details.
Fixes gh-23400
This commit adds the ability to configure Docker image registry
authentication credentials in the Maven and Gradle plugins. The
authentication credentials are passed to the Docker daemon with
all daemon API calls, and the daemon forwards the credentials to the
image registry when necessary. This makes it possible to use
builder and run images stored in a private Docker registry.
See gh-22972
This commit updates the Gradle Plugin to filter dependencies based on
the Spring-Boot-Jar-Type entry in their manifest. Jars with a
Spring-Boot-Jar-Type of dependencies-starter are excluded. Unlike the
Maven plugin, jars with a type of annotation-processor are not
excluded. It is not necessary with Gradle as use of the
annotationProcessor configuration for such dependencies already ensures
that they are not included.
See gh-22036
This commit adds a pullPolicy option to the configuration of the Maven
plugin spring-boot:build-image goal and the Gradle plugin bootBuildImage
task. The new option gives users control over pulling the builder image
and run image from a remote image registry to the local Docker daemon.
See gh-22736
This commit adds a runImage property to the Maven plugin build-image
goal and the Gradle bootBuildImage task. The property allows the user
to override the run image reference provided in the builder metadata
with an alternate run image. The runImage property can be specified
in the build file or on the command line.
Fixes gh-21534
Previously, the productionRuntimeClasspath configuration was created
without any attributes. This caused problems with multi-project
dependency resolution as there was insufficient information for Gradle
to determine which variant of a dependency should be used by the
productionRuntimeClasspath configuration.
This commit updates the configuration to have three attributes, each
configured with the same values as those of Gradle's own
runtimeClasspathConfiguration.
Fixes gh-21549
Prior to this commit, the build tool plugins set the environment
variable BP_JAVA_VERSION when invoking the CNB builder to set the
version of the JDK/JRE that the builder should use in the created
image.
With CNB API 0.3, the convention changed the name of this environment
variable to BP_JVM_VERSION. This commit updates the build tool
plugins to match the newer convention.
See gh-21273
Previously, the developmentOnly configuration, typically used for
Devtools, had to be declared manually. The BootJar and BootWar tasks
then had a property, excludeDevtools, that could be used to control
whether or not Devtools would be excluded from the executable archive.
This commit updates the reaction to the Java plugin being applied to
automatically create the developmentOnly configuration. The classpaths
of bootJar and bootWar are then configured not to include the contents
of the developmentOnly configuration. As a result of this, the
excludeDevtools property is no longer needed and has been deprecated.
Its default has also been changed from true to false to make it easy
to opt in to Devtools, when configured as a development-only
dependency, being included in executable jars and wars by adding
developmentOnly to the classpath of the archive task.
Closes gh-16599
This commit removes changes the timestamp used when writing the
classpath and layers index files in the Gradle plugin to be the
current timestamp unless `preserveFileTimestamps=true`. It also
polishes some duplication in the handling of entry attributes
when creating the fat archive and adds a test to verify that
the Gradle plugin uses the same fixed timestamp constant as
Gradle uses internally.
See gh-21005
This commit ensures that file permissions are set on entries that the
Gradle plugin adds to an archive. It also reverts the constant date
and time used for added entries to a previous value to ensure a time
zone offset is not applied.
See gh-20927
Update the Gralde plugin so that layered jars now use the regular "flat"
format. The layers.idx file now describes which layer each file should
be placed.
See gh-20813
Co-authored-by: Phillip Webb <pwebb@pivotal.io>
Simplify layer customization logic for both Maven and Gradle and
refactor some internals of the Gradle plugin.
Both Maven and Gradle now use a simpler customization format that
consists of `application`, `dependencies` and `layer order` sections.
The `application`, `dependencies` configurations support one or more
`into` blocks that are used to select content for a specific layer.
Closes gh-20526
This commit adds support for setting the image name and builder
parameters of the Gradle bootBuildImage task using command-line
options as an alternative to DSL configuration.
See gh-20520
This commit adds configuration to the Spring Boot Gradle plugin that
allows the names and contents of layers to be customized in the build
configuration.
Fixes gh-20296
With this commit, the Maven `spring-boot:build-image` goal and the
Gradle `bootBuildImage` task will configure the OpenJDK buildpack
to use the same JRE version as the project's target version,
provided the buildpack Java version is not explicitly set in the
build configuration.
Fixes gh-20172
This commit adds a `createdBy` structure to the metadata of the ephemeral
builder container image that identifies Spring Boot as the creator of the
image, along with the Spring Boot version.
See gh-20126
Previously, reflective access to the archiveBaseName property
incorrectly treated the property as a String. It should have been
treated as a Property<String>. This caused an exception to be thrown
and the deprecated baseName property to be used as a fallback.
This commit corrects the reflective access to the archiveBaseName
property. It also updates the tests to fail if a build outputs a
deprecation warning. Tests that use Gradle's Maven plugin have been
updated to expect deprecation warnings when run with Gradle 6.0 where
the plugin is deprecated. Tests that configure an archive's base name
have been updated to use archiveBaseName when running with Gradle 6.0
and later.
Closes gh-18663
Previously, our Gradle plugin was not tested against Gradle 6.0,
a number of deprecation warnings were output when using the plugin
with Gradle 6, and some functionality related to the application
plugin did not work as expected.
This commit tests the plugin against Gradle 6. It also avoids calling
deprecated APIs. The plugin is compatibile against Gradle 4.10 where
the deprecated APIs' replacements are not available so reflection is
used to call the replcaements. Lastly, the way in which the base name
of the boot distribution that is created when the application plugin
is applied has been modified to ensure that it is effective when using
Gradle 6.
Closes gh-18663
Apply checkstyle rule to ensure that private and package private
classes do not have unnecessary public methods. Test classes have
also been unified as much as possible to use default scoped
inner-classes.
Closes gh-7316
Update Gradle archive tasks to ensure that `META-INF/` and
`META-INF/MANIFEST.MF` remain as the first entries of the archive.
Prior to this commit, rewritten archives would violate the implicit
specification of `JarInputStream` that these entries should be first.
Fixes gh-16698
This commit replaces the default Asciidoctor styling with
Spring specific styling.
First, we need to unzip the contents of the Spring Asciidoctor
documentation resources provided by the
`io.spring.docsresources:spring-docs-resources` distribution zip. This
is done in a `/target/refdocs` folder. We then copy all files from
`src/main/asciidoc` to the same location, and then launch the generation
process.
See gh-16327
Previously, each test build script used a property to configure its
classpath. This commit simplifies the tests by setting the classpath
once on the GradleRunner, thereby removing the need for it to be set in
each test script. It also allows, and, in fact, requires, the use of
the plugins block to apply the Boot plugin under test.
Unfortunately, this doesn't work for the tests for the reaction to the
Kotlin plugin. See the comments in the GradleBuild class and in each
KotlingPluginActionIntegrationTests build script.
See gh-14680
Previously, only the permissions for the scripts in bin/ were set. The
permissions for the files in lib/ were not explicity set, leaving them
with the same permissions as the source files in Gradle's cache. This
has proven to be a little brittle when building in certain
environments, leading to test failures. It also assumes that the
file permissions in Gradle's cache will be appropriate for entries in
a distribution archive. That may not always be a reasonable assumption
to make.
To avoid the above-described problems, this commit updates the copy
spec that's used to add files to lib/ in the archive so that each
file uses 0644 for its permissions.
Closes gh-14158
Due to gradle/gradle#5510, using a lambda for a task action breaks
up-to-date checks in certain circumstances.
This commit updates JavaPluginAction to use an inner-class in place
of a lambda for the action that it adds to JavaCompile tasks. A test
has not been added as it does not appear to be possible to reproduce
it with a TestKit-based test.
Closes gh-14054
Scott Frederick
Andy Wilkinson
olivier.antoine
Andy Wilkinson
Lukas Cardot
Sebastiaan Fernandez
姜为
EruDev
Martin Chalupa
anshlykov
Madhura Bhave
Phillip Webb
Phillip Webb
Paddy Drury
Stephane Nicoll
Johnny Lim
dreis2211
Yuyan
SaberXu
Dave Syer
Hendrig Sellik
igor-suhorukov
Brian Clozel
jnizet
durigon
Eddú Meléndez