Since the move to JUnit 5, a number of tests were failing on Windows.
The majority were failing due to open file handles preventing the
clean up of the tests' temporary directory. This commit addresses
these failures by updating the tests to close JarFiles, InputStreams,
OutputStreams etc.
A change has also been made to CachingOperationInvokerTests to make
a flakey test more robust. Due to System.currentTimeMillis() being
less precise on Windows than it is on *nix platforms, the test could
fail as it would not sleep for long enough for the TTL period to have
expired.
Split the JUnit 5 `OutputCapture` class into separate `OutputExtension`
and `CapturedOutput` classes. The JUnit 5 callback methods are now
contained only in the `OutputExtension` class so no longer pollute the
public API that users will interact with.
The `CapturedOutput` class has also been updated to capture System.err
and System.out separately to allow distinct assertions if required.
Closes gh-17029
Refactor `Autotime` from a properties object to an interface and
change the existing metric recording implementations. The `AutoTimer`
interface is a general purpose callback that can be applied to a
`Timer.Builder` to configure it. Autotime properties are now located
in `spring-boot-actuator-autoconfigure` and have become an
implementation of the interface.
Closes gh-17026
This commit merges the conditions for determining if an endpoint is
available in a single condition, deprecating
`ConditionalOnEnabledEndpoint` in the process.
Closes gh-16169
Prior to this commit, the audit auto-configuration provided
an `InMemoryAuditEventRepository` bean. This commit changes the auto-config
so that an `AuditEventRepository` is not provided and instead the auto-config
is conditional on the presence of a `AuditEventRepository` bean. This is done
to encourage the use of a custom implementation of `AuditEventRepository`
since the in-memory one is quite limited and not suitable for production.
A flag is available if the auto-configuration needs to be turned off even
in the presence of a bean.
Closes gh-16110
Prior to this commit, the http trace auto-configuration provided
an `InMemoryHttpTraceRepository` bean. This commit changes the auto-config
so that an `HttpTraceRepository` is not provided and instead the auto-config
is conditional on the presence of a `HttpTraceRepository` bean. This is done
to encourage the use of a custom implementation of `HttpTraceRepository`
since the in-memory one is quite limited and not suitable for production.
A flag is available if the auto-configuration needs to be turned off even
in the presence of a bean.
Closes gh-15039
When `management.metrics.web.server.auto-time-requests` is enabled
(default=true), Spring Boot collects metrics on controller methods even
when they are not annotated with `@Timed`.
When this happens, created metrics are based on the default
`@Timed` configuration and there is no way to customize the
configuration of those auto-timed controller metrics.
This commit adds default configurations to auto-timed requests on both
client and server sides.
See gh-15988
This commit also adds tests to ensure that the child
management context works when lazy initialization is
enabled. Also, it adds a BeanFactoryPostProcessor to
the child context so that the server is created and
listening for requests but other beans in the child
context are not created until requested.
See gh-16184
This commit migrates `AnnotationConfigReactiveWebApplicationContext`
parent to the `GenericApplicationContext` abstraction. Any use of
`AnnotationConfigWebApplicationContext` is also removed as it also
inherits from the `AbstractRefreshableApplicationContext` outdated
hierarchy.
A new `AnnotationConfigServletWebApplicationContext` context is
introduced instead, extending from `GenericApplicationContext` and
providing the counter part of the reactive context for the Servlet-based
web app tests.
See gh-16096
This commit updates CORS handling according to Framework changes
introduced via [1]. It also fixes tests according to the new behavior.
See gh-16410
[1] d27b5d0ab6.
This commit replaces the default Asciidoctor styling with
Spring specific styling.
First, we need to unzip the contents of the Spring Asciidoctor
documentation resources provided by the
`io.spring.docsresources:spring-docs-resources` distribution zip. This
is done in a `/target/refdocs` folder. We then copy all files from
`src/main/asciidoc` to the same location, and then launch the generation
process.
See gh-16326
Update the `CustomEndpointConfiguration` class in
`ScheduledTasksEndpointAutoConfigurationTests` to be package private
so that it can be enhanced by cglib.
Prior to merge commit 361437f4 the class was a lite configuration so
it didn't matter that it was a private class.
Previously, environment binding always happened in a post processor once
the bean has been created. Constructor binding requires to perform the
binding at creating time so this commit performs binding at creation
time if possible.
When this happens, a special `ConfigurationPropertiesBeanDefinition` is
created with a supplier that invokes the binder. To avoid a case where
a bean is processed twice, the post-processor now ignores any bean that
has already been bound to the environment.
Closes gh-8762
Co-authored-by: Madhura Bhave <mbhave@pivotal.io>
This commit adds the newly introduced `@ConditionalOnExposedEndpoint`
conditional annotation to all auto-configured `Endpoint` in Actuator.
With that change, `EndPoint` instances and related infrastructure will
only be created when they are meant to be exposed and used. This will
save CPU and memory resources when Actuator is present.
Closes gh-16093
Prior to this commit, Actuator `Endpoint` instantiations would be
guarded by `@ConditionalOnEnabledEnpoint` condition annotations. This
feature saves resources as disabled endpoints aren't unnecessarily
instantiated.
By default, only `"health"` and `"info"` endpoints are exposed over the
web and all endpoints are exposed over JMX.
As of gh-16090, JMX is now disabled by default. This is an opportunity
to avoid instantiating endpoints if they won't be exposed at all, which
is more likely due to the exposure defaults.
This commit adds a new `@ConditionalOnExposedEndpoint` conditional
annotation that checks the `Environment` for configuration properties
under `"management.endpoints.web.exposure.*"` and
`"management.endpoints.jmx.exposure.*"`. In the case of JMX, an
additional check is perfomed, checking that JMX is enabled first.
The rules implemented in the condition itself are following the ones
described in `ExposeExcludePropertyEndpointFilter`.
See gh-16093
This commit switches the default value for the `spring.jmx.enabled`
configuration property.
JMX is now disabled by default and can be enabled with
`spring.jmx.enabled=true`.
Closes gh-16090
This commit splits the management context configuration for jersey
into two separate configurations depending on if the type is SAME or
CHILD. The configuration for the SAME context should only kick in if
there is no existing ResourceConfig bean.
Fixes gh-15891
This commit also ensures that Jersey-based actuator endpoints are
available before the user has configured a `ResourceConfig` bean
Fixes gh-15625
Fixes gh-15877
Previously, MeterRegistryPostProcessor would trigger the creation of all
meter binders and meter registry customizers before applying the
customizers and calling the binders. In some situations with complex
dependency graphs where the creation of a binder and the injection of
its dependencies inadvertently triggered some meter binding, this
could result in meters being bound before the registry had been
customized.
This commit reworks MeterRegistryPostProcessor and MeterRegistryConfigurer
to defer the retrieval of registry customizers and meter binders until
just before they are needed. As a result, customizers are now retrieved
and applied before the binders are retrieved.
Closes gh-15483
This commit adds `ElasticsearchRestHealthIndicator`, a new
`HealthIndicator` for Elasticsearch, using the Elasticsearch "low level
rest client" provided by the
`"org.elasticsearch.client:elasticsearch-rest-client"` dependency.
Note that Spring Boot will auto-configure both low and high level REST
clients, but since the high level one is using the former, a single
health indicator will cover both cases.
See gh-15211
When server and management are at different ports, and when server
requires TLS client authentication, then there is no simple method to
disable TLS client authentication for management port.
This commit adds an additional "none" option to ssl.client-auth.
Example:
server.port=8080
server.ssl.enabled=true
server.ssl.client-auth=need
management.server.port=8081
management.server.ssl.enabled=true
management.server.ssl.client-auth=none
See gh-14985
Complete the restructuring of the security auto-configuration
packages by removing the direct import of web configuration from
the main security auto-configuration.
Closes gh-14412
Update `WebEndpointDiscoverer` and related classes to that multiple
`PathMapper` beans can be registered. Mappers are now tried in order
until one returns a non-null value.
Closes gh-14841
Previously, Couchbase's health was determined by retrieving the bucket info
from the cluster info. This retrieval could take over one minute in some
cases even when Couchbase is health. This latency is too large for a health
check.
The Couchbase team have recommended the of a Cluster#diagnostics instead.
This provides a much lower latency view of the cluster's health. This
commit updates CouchbaseHealthIndicator to use Cluster#diagnostics while
retaining support, in a deprecated form, for the old info-based mechanism
should anyone want to opt back into that in 2.0.x.
Closes gh-14685
Update `MappingWebEndpointPathMapper` to use the lowercase version of
the endpoint ID when no explicit path mapping has been set. An endpoint
with the ID 'myEndpoint' will now be mapped to the path 'myendpoint'.
See gh-14773
Update `ExposeExcludePropertyEndpointFilter` so that mixed case
endpoint IDs are supported. Prior to this commit it was not easy for
an endpoint to be missed by the filter due to the formatting of the
property value.
See gh-14773
Update `OnEnabledEndpointCondition` so that mixed case endpoint IDs
are supported. Prior to this commit an
`InvalidConfigurationPropertyNameException` would be thrown when trying
to enabled or disable an endpoint with a camel case ID.
See gh-14773
Update the endpoint time-to-live binding logic so that mixed case
endpoint IDs are supported. Prior to this commit an
`InvalidConfigurationPropertyNameException` would be thrown when using
a camel case endpoint ID.
See gh-14773
Add an `EndpointID` class to enforce the naming rules that we support
for actuator endpoints. We now ensure that all endpoint names contain
only letters and numbers and must begin with a lower-case letter.
Existing public classes and interfaces have been changes so that String
based `endpointId` methods are deprecated and strongly typed versions
are preferred instead. A few public classes that we're not expecting
to be used directly have been changed without deprecated methods being
introduced.
See gh-14773
Rework Prometheus push gateway support so that the central class can
be used outside of auto-configuration. The shutdown flags have also
been replaced with a single "shutdown-operation" property since it's
unlikely that both "push" and "delete" will be required.
It's also possible now to supply a `TaskScheduler` to the manager.
See gh-14353
This commit fixes missing descriptions and default values when
applicable for `management.server.ssl`, `server.compression`,
`server.http2`, `server.servlet.jsp`, `server.servlet.session` and
`server.ssl`.
Those nested namespace are managed by a POJO that is declared outside
of the module of the target @ConfigurationProperties type using it. As
a result, the annotation processor has no access to the source model and
can't extract the description and the default value, if any.
This commit migrates the misleading field-level Javadoc to manual meta
data for the time being.
Closes gh-14669
Generally speaking, methods on configuration classes will only be called once
and, therefore, it should be safe to hold a reference to a Stream for later
one-time usage. However, there are some scenarios in Spring Fu where functional
registration results in an attempt being made to use a Stream more than use.
This commit protects against multiple use by storing the ObjectProvider and
getting a new ordered Stream each time it's needed.
Closes gh-14467
This commit deprecates the few 'enabled' flags that control whether
certain meter binders are registered in the context.
Metrics auto-configuration for the JVM, Logback and System-related
information have been moved to individual auto-configurations so that
they can be excluded rather than using the now deprecated flag.
This harmonizes our policy with regards to disabling behaviour,
especially since other similar auto-configurations do not have such
flag.
Closes gh-13408
This commit harmonizes metrics test to rely on `MetricRun.simple()`
rather than configuring a simple `MeterRegistry` manually. Rather than
applying related auto-configurations automatically, `MetricsRun` only
enable the absolute minimum.
See gh-14255
This commit harmonizes the auto-configurations for RestTemplate and
WebClient in a single `HttpClientMetricsAutoConfiguration`. Doing so
allows to give a better scope for the shared `MeterFilter`.
As a result`WebClientMetricsAutoConfiguration` has moved to the `client`
package.
Closes gh-14269
Upgrade to M2 broke a test that was looking for a particular bean that
is configured by Spring Integration (`HeaderChannelRegistry`).
It looks like INT-4517 is related to the regression as it registers the
bean too late for the auto-configuration to see it.
This commit changes the condition to a more central bean that is created
very early on.
Closes gh-14142
This commit aligns SessionsEndpoint with
FindByIndexNameSessionRepository API improvements that simplifies
retrieval of sessions by principal name.
Closes gh-14124
This commit changes AbstractWebMvcEndpointHandlerMapping to
be a MatchableHandlerMapping. Additionally, EndpointRequest,
now delegates to MvcRequestMatcher for Spring MVC applications.
For all other applications, AntPathRequestMatcher is used as
a delegate.
Closes gh-13962
This commit makes sure to use a configurable timeout to check if the
Couchbase cluster is up, rather than relying on the default that can be
quite long.
Closes gh-13879
This commit ensures that the new "spring.jmx.unique-names" property
deprecates the Endpoint's specific property as they share the same goal.
If both are set with an incompatible value, an exception is thrown
inviting the user to update their configuration.
Closes gh-13990
Add an `DispatcherServletPath` interface which provides a much more
consistent way to discover the path of the main dispatcher servet.
Prior to this commit, auto-configurations would often make use of the
`ServerProperties` class to discover the dispatcher servlet path. This
mechanism isn't very explicit and also makes it hard for us to relocate
that property in Spring Boot 2.1.
This commit also reverts most of fddc9e9c7e since it is now clear that
the supporting multiple dispatcher servlet paths will be much more
involved that we originally anticipated.
Closes gh-13834
As of Spring Framework 5.1, we're depending on the Reactor Californium
release train.
Reactor Netty is now at version 0.8 and changed its artifact
coordinates, package names and broke several APIs. Spring Framework is
now up-to-date with those changes and this commit does the same for
Spring Boot.
Note that in that process, the `NettyServerCustomizer` has been changed
since the former `HttpServerOptions.Builder` API is now gone from
Reactor Netty, and we're now relying on immutable server instances
instead of a stateful builder pattern.
See gh-13321
The ConnectionFactory can be used early in user configuration to
configure an `Exchange`. Such connection may not hold the proper
MetricCollector and can be cached, leading to missed metrics
information.
This commit moves the configuration of RabbitMQ metrics to a
BeanPostProcessor so that the proper MetricCollector is configured
before any connection is created.
Closes gh-12855
This commit improves the `health` endpoint to run health check for a
particular component or, if that component is itself a composite, an
instance of that component.
Concretely, it is now possible to issue a `GET` on
`/actuator/health/{component}` and
`/actuator/health/{component}/instance` to retrieve the health of a
component or an instance of a composite component, respectively.
If details cannot be showed for the current user, any request leads to a
404 and does not invoke the health check at all.
Closes gh-8865
This commit updates the initial proposal to add support for reactive
use cases as well. A reactive application can use
ReactiveHealthIndicatorRegistry as an alternative to
HealthIndicatorRegistry.
Closes gh-4965
This commit introduces HealthIndicatorRegistry which handles
registration of HealthIndicator instances. Registering new
HealthIndicator instances is now possible in runtime.
See gh-4965
Auto-configuration of LDAP's `LdapTemplate` is currently a part of
`LdapDataAutoConfiguration` which is conditional of presence of
`LdapRepository` (i.e. Spring Data LDAP). This arrangement isn't ideal
since the `LdapTemplate` is a part of Spring LDAP project, and therefore
should not be tied to Spring Data LDAP.
This commit improves and simplifies LDAP auto-configuration by moving
`LdapTemplate` configuration to `LdapAutoConfiguration`. Consequently,
`LdapDataAutoConfiguration` is not needed anymore and is removed.
See gh-13136
Previously, when the Jersey-based Actuator was configure with a
separate management port, the resulting child context would fail to
start due to their being no ResourceConfigCustomizer beans available.
This commit updates the configuration so that the customizer's are
injected using an ObjectProvider and an empty list is used in the
event of their being no customizer beans. This aligns the child
context configuration class with JerseyAutoConfiguration which
already used this approach.
Closes gh-12975
This commit improves the initial proposal by providing a by name read
operation that returns the detail of a particular cache. It also adds
more tests and complete API documentation for the feature.
Closes gh-12216
This commits adds an actuator endpoint which lists the caches per
context and cacheManager and provides a delete operation to clear the
caches. As the statistics are exposed via the metrics endpoint they are
not included
See gh-12216
This commit adds support for Actuator Metrics for WebClient.
This support mirrors the current behavior for `RestTemplate`, reusing
the same metric name `"http.client.requests"` and tags.
`WebClient` is instrumented by a `MetricsWebClientFilterFunction` which
is applied by a `WebClientCustomizer`. This instrumentation happens
automatically only if you create an instance of `WebClient` using an
auto-configured `WebClient.Builder` bean.
This infrastructure is reusing de facto the `MeterFilter` that has been
added for `RestTemplate` in order to limit the "uri" tag cardinality.
Closes gh-12228
All Hibernate entityManagerFactories are automatically instrumented
and their statistics are included into Micrometer using its
HibernateMetrics binder.
Closes gh-12550
Phillip Webb
Madhura Bhave
Stephane Nicoll
Johnny Lim
Andy Wilkinson
Ingyu Hwang
dreis2211
Tadaya Tsuyukubo
Vedran Pavic
Sebastien Deleuze
Dmytro Nosan
simionAndrei
Spring Operator
Valery_Yalauchuk
Brian Clozel
Raheela
ayudovin
Stephen Doxsee
igor-suhorukov
TwinProduction
Alon Bar-Lev
Hanope
Alexander Abramov
David J. M. Karlsen
Michael Weirauch
Mikalai Lushchytski
Hiroaki Yoshida
artsiom
Johannes Edmeier
Jon Schneider
Miguel Gomes
Michael J. Simons
Tim Ysewyn
Rui Figueira