Previously, ResolvedDependencies used hasError on
ResolvedConfiguration to check that it was safe to work with all
of the resolved configuration's artifacts and their files. This
check is not sufficient as errors can still occur later on.
This commit updates ResolvedDependencies to use a lenient
configuration, thereby avoiding any problems that may be caused by
errors that occur after the hasError check.
Closes gh-30586
Previously, querying the artifact's extension in
SinglePublishedArtifact would result in eager creation of the task
that creates the artifact. Typically, this is the bootWar task.
Instead of querying the extension, this commit reworks
SinglePublishedArtifact and its callers to call separate methods for
jar and war artifacts so that the extension check is no longer
required.
Tests have been added to ensure that running help does not trigger
any unexpected task creation. The tests' assertions tolerate some
variation in behavior that depend on the version of Gradle and
whether the configuration cache is enabled.
Closes gh-30211
The changes for gh-28562 attempted to align the Gradle plugin's
handling of META-INF with the Maven plugin's behavior. Unfortunately,
they want too far, applying the handling to both jar and war files
when the Maven plugin only applies it to jar files.
This commit reworks the changes so that they only apply to jar files.
Closes gh-30026
Previously, the classpath of bootJar, bootWar, and bootRun was
configured directly as a FileCollection derived from the main source
set's runtime classpath. This direct configuration meant that
subsequent changes to the main source set's runtime classpath may not
have been picked up.
This commit changes the configuration of the classpath to use a
Callable. This indirection allows subsequent changes to the main
source set's runtime classpath to be picked up as long as they
occur before Gradle calls the callable.
Closes gh-29672
Update the Maven and Gradle packaging for war files so that a
`classpath.idx` file is written into the archive that provides the
original order of the classpath, as was previously done for jar files.
The `WarLauncher` class will use this file when running as an exploded
archive to ensure that the classpath order is the same as when running
from the far war.
Fixes gh-19875
This commit adds configuration to the Maven and Gradle plugins to
allow specifying the names of build and launch cache volumes provided
to the CNB builder.
See gh-28292
Update Maven and Gradle plugins to allow build info properties to be
excluded.
Prior to this commit, the `BuildPropertiesWriter` would fail with an
NPE if the group, artifact, name or version properties were `null`.
This was specifically problematic with the Gradle plugin, since its
DSL allows `null` properties which would either be passed to the writer
or, in the case of `artifact`, converted into a string value of
"unspecified".
See gh-27412
This commit adds configuration to the Maven and Gradle plugins to
allow specifying multiple tag to be created that refer to the built
image.
See gh-27613
This commit adds configuration to the Maven and Gradle plugins to
allow specifying the network mode to be provided to the image
building goal and task.
See gh-27486
An upgrade to Apache Commons Compress allows the build plugins to write
the launch script to the fat jar as a proper preamble, making the file
compatible with more jar and zip tooling.
Fixes gh-22336
Update `RepackageMojo` and supporting classes so that `exclusions`
on the repackage goal apply to both the contributed libraries and any
existing jar entries already contained in the original war.
Prior to this commit, exclusions would apply to contributed jars (for
example, those in `WEB-INF/lib-provided`) but not jars that were
packaged directly into `WEB-INF/lib` by the war plugin
Fixes gh-15808
Co-authored-by: Phillip Webb <pwebb@vmware.com>
Previously, a project with a dependency on Spring Boot's configuration
processor would fail to build when the configuration cache is enabled
due to it accessing the Project during task execution.
Instead of accessing the project during task execution, this commit
updates the code to retrieve the resource locations from the matching
source set in advance. The locations are then stored in the action
that configures the compile task when needed.
Closes gh-26880
Change `SpringBootPlugin.PRODUCTION_RUNTIME_CLASSPATH_NAME` from package
private to public so that it can be accessed in user build scripts.
Fixes gh-26686
Previously, the targetJavaVersion property of bootBuildImage was set
using the project's target compatibility directly. This meant that
property's value would reflect the configured target compatibility at
the time of the task's creation and any subsequent changes to the
target compatibility would be missed.
This commit updates the registration of the bootBuildImage task to set
the value of the targetJavaVersion property using a provider. This
indirection means that the project's target compatibility isn't read
until the value of the targetJavaVersion is read, allowing any changes
to the target compatibility to be picked up even if they're made after
the bootBuildImage task has been created.
Fixes gh-26297
This commit adds configuration to the Maven and Gradle plugins to
allow a list of volume mount bindings to be provided to the image
building goal and task. This enables service bindings to be mounted
in the builder image that are recognized by buildpacks to support
custom certificates, build tool configuration, APM integration, and
other buildpack features.
Fixes gh-23518
This commit adds configuration to the Maven and Gradle plugins to
allow a list of buildpacks to be provided to the image building
goal and task.
Fixes gh-21722
Previously, when building a layered jar, the Gradle plugin only
considered a configuration's direct dependencies when identifying
project dependencies. This resulted in transitive project dependencies
being missed when deciding which dependencies belong in the
application layer.
This commit updates ResolvedDependencies to consider all projects
from the root project when collecting the IDs of local projects. This
ensures that any project dependency, no matter where it appears in the
dependency graph, is successfully identified.
Fixes gh-25163
Previously, unlike the application plugin's run task, our bootRun task
ignored the project's Java toolchain. This meant that the application
was run on a JVM with the same Java version as the one being used by
Gradle itself. This could result in a failure if the application
required a more modern JVM.
This commit updates the plugin to configure the bootRun task's
JavaLauncher convention to be one derived from the project's Java
toolchain. Toolchain support was introduced in Gradle 6.7 so this is
only done when using Gradle 6.7 and later.
Fixes gh-24517
Previously, bootRun assumed that the Java version of the JVM that would
run the application would be the same as the Java version of the JVM
that is running the build. This assumption does not hold true when
Gradle's toolchain support is used to configure tasks that fork a new
JVM to use a version other than that being used by Gradle itself.
This commit updates the BootRun task to query the JavaLauncher property
when determining the version of Java on which the application will be
run. Toolchain support and the JavaLauncher property are new in Gradle
6.7. To support earlier versions of Gradle, NoSuchMethodError is caught
we continue as if no JavaLauncher has been configured and use the local
JVM's Java version.
Fixes gh-24512
Prior to this commit, running the bootBuildImage Gradle task on a
project configured for war packaging would result in a jar file being
built and used in the image instead of the war file. With this commit
an error will be thrown from the plugin in this case.
Fixes gh-24521
When a Configuration is copied, any before and after resolve actions
that are registered with its ResolvableDependencies are also copied
over. This means that, when a copied configuration is resolved the
resolution actions may be called on a ResolvableDependencies instances
that isn't the one to which they were added.
Previously, the above-described Gradle behaviour would result in
BootJar accessed the ResolvedConfiguration of a Configuration that may
not have yet been resolved. At best this would trigger Configuration
resolution and at worst it would fail. A failure could occur if the
configuration had been copied so that it could be made resolvable.
The afterResolve action would then try to access the
ResolvedConfiguration of the original Configuration. This would trigger
a resolution attempt that fails due to the original configuration being
marked as unresolvable.
This commit updates the afterResolve action in BootJar to check that
the ResolvableDependencies with which it is called matches the
ResolvableDependencies with which it was original registered. Only
when the two match, and therefore the configuration has actually been
resolved, does processing proceed.
Fixes gh-24072
Previously, when building a layered jar with Gradle, project
dependencies were treated the same as any other dependency, being
included in the dependencies or snapshot dependencies layer based
on their version.
This commit updates the default layering when using Gradle to include
project dependencies in the application layer by default. The DSL has
also been updated to allow their layer to be customized using new
includeProjectDependencies() and excludeProjectDependencies() methods
rather than relying on including and excluding them via a
group:artifact:version pattern.
Closes gh-23431
This commit adds options to the Maven and Gradle plugins to publish
to a Docker registry the image generated by the image-building goal
and task.
The Docker registry auth configuration added in an earlier commit
was modified to accept separate auth configs for the builder/run
image and the generated image, since it is likely these images will
be stored in separate registries or repositories with distinct
auth required for each.
Fixes gh-21001
Previously, BootJar would resolves all of a project's configurations
when building a layered jar. This was unnecessarily broad as it was
likely to include configurations that had contributed nothing to the
jar's classpath.
This commit replaces the configuration resolution with an afterResolve
action that populates the ResolvedDependencies in response to a
configuration being resolved. This allows the resolved dependencies to
be populated from all of the configurations that were resolved as part
of determining the jars classpath and no more.
Closes gh-23528
Prior to this commit, the bootBuildInfo was configured eagerly.
Configuring it lazily prevent this task from being configured when not
explicitly needed. Also, the 'classes' and 'bootJar' tasks are now
lazily configured, as the bootBuildInfo task was causing them to be
configured eagerly.
See gh-23435
This commit adds the ability to configure the Maven and Gradle
plugins to use a remote Docker daemon using build file
configuration, as an alternative to setting environment variables
to specify remote host connection details.
Fixes gh-23400
This commit adds the ability to configure Docker image registry
authentication credentials in the Maven and Gradle plugins. The
authentication credentials are passed to the Docker daemon with
all daemon API calls, and the daemon forwards the credentials to the
image registry when necessary. This makes it possible to use
builder and run images stored in a private Docker registry.
See gh-22972
This commit updates the Gradle Plugin to filter dependencies based on
the Spring-Boot-Jar-Type entry in their manifest. Jars with a
Spring-Boot-Jar-Type of dependencies-starter are excluded. Unlike the
Maven plugin, jars with a type of annotation-processor are not
excluded. It is not necessary with Gradle as use of the
annotationProcessor configuration for such dependencies already ensures
that they are not included.
See gh-22036
This commit adds a pullPolicy option to the configuration of the Maven
plugin spring-boot:build-image goal and the Gradle plugin bootBuildImage
task. The new option gives users control over pulling the builder image
and run image from a remote image registry to the local Docker daemon.
See gh-22736
This commit adds a runImage property to the Maven plugin build-image
goal and the Gradle bootBuildImage task. The property allows the user
to override the run image reference provided in the builder metadata
with an alternate run image. The runImage property can be specified
in the build file or on the command line.
Fixes gh-21534
Previously, the productionRuntimeClasspath configuration was created
without any attributes. This caused problems with multi-project
dependency resolution as there was insufficient information for Gradle
to determine which variant of a dependency should be used by the
productionRuntimeClasspath configuration.
This commit updates the configuration to have three attributes, each
configured with the same values as those of Gradle's own
runtimeClasspathConfiguration.
Fixes gh-21549
Prior to this commit, the build tool plugins set the environment
variable BP_JAVA_VERSION when invoking the CNB builder to set the
version of the JDK/JRE that the builder should use in the created
image.
With CNB API 0.3, the convention changed the name of this environment
variable to BP_JVM_VERSION. This commit updates the build tool
plugins to match the newer convention.
See gh-21273
Previously, the developmentOnly configuration, typically used for
Devtools, had to be declared manually. The BootJar and BootWar tasks
then had a property, excludeDevtools, that could be used to control
whether or not Devtools would be excluded from the executable archive.
This commit updates the reaction to the Java plugin being applied to
automatically create the developmentOnly configuration. The classpaths
of bootJar and bootWar are then configured not to include the contents
of the developmentOnly configuration. As a result of this, the
excludeDevtools property is no longer needed and has been deprecated.
Its default has also been changed from true to false to make it easy
to opt in to Devtools, when configured as a development-only
dependency, being included in executable jars and wars by adding
developmentOnly to the classpath of the archive task.
Closes gh-16599
This commit removes changes the timestamp used when writing the
classpath and layers index files in the Gradle plugin to be the
current timestamp unless `preserveFileTimestamps=true`. It also
polishes some duplication in the handling of entry attributes
when creating the fat archive and adds a test to verify that
the Gradle plugin uses the same fixed timestamp constant as
Gradle uses internally.
See gh-21005
This commit ensures that file permissions are set on entries that the
Gradle plugin adds to an archive. It also reverts the constant date
and time used for added entries to a previous value to ensure a time
zone offset is not applied.
See gh-20927
Update the Gralde plugin so that layered jars now use the regular "flat"
format. The layers.idx file now describes which layer each file should
be placed.
See gh-20813
Co-authored-by: Phillip Webb <pwebb@pivotal.io>
Simplify layer customization logic for both Maven and Gradle and
refactor some internals of the Gradle plugin.
Both Maven and Gradle now use a simpler customization format that
consists of `application`, `dependencies` and `layer order` sections.
The `application`, `dependencies` configurations support one or more
`into` blocks that are used to select content for a specific layer.
Closes gh-20526
This commit adds support for setting the image name and builder
parameters of the Gradle bootBuildImage task using command-line
options as an alternative to DSL configuration.
See gh-20520
This commit adds configuration to the Spring Boot Gradle plugin that
allows the names and contents of layers to be customized in the build
configuration.
Fixes gh-20296
With this commit, the Maven `spring-boot:build-image` goal and the
Gradle `bootBuildImage` task will configure the OpenJDK buildpack
to use the same JRE version as the project's target version,
provided the buildpack Java version is not explicitly set in the
build configuration.
Fixes gh-20172
This commit adds a `createdBy` structure to the metadata of the ephemeral
builder container image that identifies Spring Boot as the creator of the
image, along with the Spring Boot version.
See gh-20126
Johnny Lim
Andy Wilkinson
Phillip Webb
Octavia Togami
Scott Frederick
Lars Grefer
Stephane Nicoll
Julian Liebig
Vedran Pavic
Rafael Ceccone
Jeroen Meijer
Madhura Bhave
Scott Frederick
Madhura Bhave
olivier.antoine
Andy Wilkinson
Lukas Cardot
Sebastiaan Fernandez
姜为
EruDev
Martin Chalupa
anshlykov
Phillip Webb
Paddy Drury
Stephane Nicoll
dreis2211