Previously, the endpoint used the same change log history service for
for each SpringLiquibase bean that it processed. This resulted in
pollution of the reported changes as the history of each bean was not
isolated.
This commit updates the endpoint to use a new history service for each
SpringLiquibase bean that is processed.
See gh-19171
In general we do not recommend using @PropertySource due to them being
added to the environment too late for auto-configuration to use them. This
commit updates the documentation to mention them in the list of external
sources along with a note.
Closes gh-18900
There is a direct link between the sslEnabled flag and the default port
that should be used by an address. The checks are currently set in two
places:
* Determine which port should be used
* Determine if SSL should be enabled
This commit polishes the initial proposal so that secureConnection is
only set if a protocol is available.
See gh-19109
Previously, when RunProcess handled a SIGINT it would immediately
attempt to destroy the process that it had run. This created a race
condition between the SIGINT being handled by the child process
and RunProcess destroying the child. The exact behavior of destroy
is implementation dependent and it may result in forcible termination
of the process where shutdown hooks are not called. This is what
happens on Windows. The exit code in such a case is 1 which prevents
anything from waiting for the process to complete from detecting
that it ended as a result of a SIGINT, leaving it with no choice but
to report an error. This is what happens with mvn spring-boot:run
with a forked process on Windows and results in the build failing.
This commit updates RunProcess to allow the child process to handle
the SIGINT itself, waiting for up to five seconds for that to happen
before the process is then destroyed. Given this time, the child
process exits with 130 which RunMojo already handles correctly as
indicating that the process died due to SIGINT and the build completes
with success as a result.
Fixes gh-18936
Previously, whitespace in between the keys and values in the JSON was
not trimmed correctly in BasicJsonParser which lead to it incorrectly
parsing JSON with whitespace between the opening of a list ([) and the
opening of a map ({).
This commit updates the parser to trim unwanted whitespace and adds a
test to AbstractJsonParserTests to verify the whitespace handling
behaviour across all JsonParser implementations.
Closes gh-18911
Previously @ServletComponentScan did not work when there was a
component index on the classpath as it made an assumption about
the concrete type of the BeanDefinitions produced by scanning that
does not hold true when an index is present.
This commit updates the scanning and the handlers to correct the
assumpution by working with a bean definition type that is produced
by scanning both when there is and when there is not an index present.
To prevent the problem from reoccuring, a test that uses and index
has been added and the import of ScannedGenericBeanDefinition is now
prohibited by Checkstyle.
Closes gh-18910
Previously, when the configuration properties annotation processor
encountered a property that was the same as an outer type that had
already been processed, it would fail with a stack overflow error.
This commit introduces the use of a stack to track the types that
have been processed. Types that have been seen before are skipped,
thereby preventing a failure from occurring. We do not fail upon
encountering a recursive type to allow metadata generation to
complete. At runtime, the recursive property will not cause a problem
if it is not bound.
Fixes gh-18365
Previously, the documentation did not provide any guidance on using
Jersey alongside Spring MVC or any other web framework.
This improves the documentation in two ways:
1. It notes that, in the presence of both Jersey and Spring MVC, the
Actuator will prefer Spring MVC for exposing HTTP endpoints.
2. It adds a how-to describing how to configure Jersey to forward
requests for which it has no handler on to the rest of the filter
chain. When Spring MVC is the other framework, this allows them to
be handled by its dispatcher servlet.
Closes gh-17523
This commit is a continuation of the work done in 987a5f81. In
addition to developers and licenses that are covered in the earlier
commit, a number of other settings are still inherited from the
starter parent. This commit updates the documentation to show them
being overridden as well.
Closes gh-18532
Previously, @EndpointFilter would only have an effect when used as
an annotation or meta-annotation on the endpoint class itself. It
would have no effect when used on a super-class of the endpoint
bean's class.
This commit updates EndpointDiscoverer so that an @EndpointFilter
annotation or meta-annotation on a super-class will be found and
applied to the discovery process. This is achieved by using find…
rather than get… when retrieving the attributes for the EndpointFilter
annotation.
Fixes gh-17866
Previously, AbstractDependsOnBeanFactoryPostProcessor was unordered
which meant that it was impossible to guarantee that another bean
factory post-processor would run after it. This prevented overriding
of the dependsOn relationships that is creates.
This commit updates AbstractDependsOnBeanFactoryPostProcessor to give
it a default order of zero. This will allow additional bean factory
post-processors to be configured with a lower precedence order (values
greater than 0) so that they run after any
AbstractDependsOnBeanFactoryPostProcessor and can override the
dependencies that it has configured.
Fixes gh-18362
Publishing to Maven Central requires spring-boot-starter-parent to
declare its license and developers. When a user then uses
spring-boot-starter-parent as their project's parent, these values
are inherited and this is almost certainly unwanted.
This commit updates the documentation to recommend and demonstrate
overriding the license and developers that are inherited from the
starter parent.
Closes gh-18532
Previously, the security risks and our recommendations on how to
mitigate them were not documented as clearly as they could have been.
This commit makes some changes to try to address this:
1. The security risk is now noted at the beginning of the section
2. The recommendation to use SSL is now documented more prominently
and an alternative recommendation to only use remote support on
a trusted network has been added.
3. The example secret has been removed to prevent copy and paste
4. A recommendation to use a secret that is unique and strong has been
added
Closes gh-18825
Previously, if a bean definition had no resource description, the
failure analysis description would state that the been had been
defined in null which was of no use to the user.
This commit updates the failure analysis to omit information about
where the bean was definied when the definition has no resource
description.
Fixes gh-18721
Rename `max-http-post-size` to `max-http-form-post-size` for Jetty and
Tomcat to make it clearer that they only apply to POSTed form content.
See gh-18566
Prior to this commit, all supported servers would share the same
configuration property `server.connection-timeout`. Unfortunately, in
many cases the behavior of this timeout changes depending on the server.
From actual connection setup timeout, to detecting and closing idle
connections, this property cannot be properly translated from one server
implementation to another.
This commit deprecates this configuration property and introduces server
specific properties:
* `server.jetty.connection-idle-timeout`
(Time that the connection can be idle before it is closed.)
* `server.netty.connection-timeout`
(Connection timeout of the Netty channel.)
* `server.tomcat.connection-timeout`
(Amount of time the connector will wait, after accepting a connection,
for the request URI line to be presented.)
* `server.undertow.no-request-timeout`
(Amount of time a connection can sit idle without processing a request,
before it is closed by the server.)
`server.connection-timeout` is now deprecated and will be removed in a
future release.
Fixes gh-18473
This commit adds a note to spring-boot-features.adoc to clarify that
using javadoc tags to format configuration property descriptions is not
supported.
See gh-18578
Previously, Maven's default behaviour was relied up which resulted
in the artifact ID being appended to each URL as it was inherited.
This behaviour can only be disabled in Maven 3.6 and later, a version
that we cannot use due to an incompatibility with the Flatten Plugin.
This commit works around Maven's default behaviour by defining
properties for the SCM URL, connection, and developer connection and
then explicitly defining the settings in each pom using these
properties. The explicit definition of the properties in each pom
prevents them being inherited from the parent, thereby disabling the
unwanted appending of the artifact ID to the URL.
Fixes gh-18328
Update `JerseyManagementContextConfiguration` so that customizer beans
are not longer applied. The endpoint resource endpoints are now added
with a registrar bean `@PostConstruct` method.
Prior to this commit, when running the management server on a different
port a `Resource` added by a customizer could be added two different
`ResourceConfig` instance. This breaks the singleton contract expected
by Jersey.
Fixes gh-17801
Co-authored-by: Phillip Webb <pwebb@pivotal.io>
Extract reactor specific code to an inner class to protect
against ClassNotFound exceptions if reactor is not in use.
Also add support for `Flux`.
See gh-18339
Update `CachingOperationInvoker` so that TTL caching is applied directly
to reactive types. Prior to this commit, a `Mono` would be cached, but
the values that it emitted would not.
See gh-18339
Update `DataSourceInitializedPublisher` to fallback to the
`LocalContainerEntityManagerFactoryBean` if the
`javax.persistence.nonJtaDataSource` property is not defined.
As of Hibernate 4.3 the property is no longer set if the `EntityManager`
is created from a `PersistenceUnitInfo` instance rather than actual
properties.
Although this is being addressed in Hibernate issue HHH-13432, it's
not strictly a requirement of the JPA spec that the property is set.
Fixes gh-17061
This will ensure that ReactiveManagementWebSecurityAutoConfiguration backs
off and that the actuator endpoints are also secured via OAuth2.
Fixes gh-17949
Previously, a number of usages of @ConditionalOnMissingBean prevented
a bean that implements an auto-configured bean's "main" interface from
causing the auto-configuration of the bean to back off. This would
happen when @ConditionalOnMissingBean did not specify a type, the
@Bean method returned the bean's concrete type, and that concreate
type implements a "main" interface.
This commit updates such usages of @ConditionalOnMissingBean to
specify the "main" interface as the type of the bean that must be
missing. This will allow, for example, the auto-configured
MongoTemplate bean to back off when a MongoOperations bean is defined.
Fixes gh-18101
Update `ApplicationContextRequestMatcher` to ensure that the `matches`
method is never called before `initialized`. This fixes an issue
accidentally introduced in commit 5938ca78 where concurrent calls
to `matches` could trigger unexpected errors due to the fact that the
second call proceeded before the `initialized` method had returned.
Fixes gh-18211
This commit makes sure that any subsequent call on addProtocolResolver
on the context will impact the ResourceLoader implementation that
DevTools sets on the context.
This makes sure that any custom ProtocolResolver that is set later in
the lifecycle is taken into account.
Closes gh-17214
Andy Wilkinson
Brian Clozel
Johnny Lim
Phillip Webb
dreis2211
cbono
luoyuan
Madhura Bhave
Leo Li
Stephane Nicoll
Lars Grefer
Adam Michalik
Mark Bigler
Mark Pollack
Jens Teglhus Møller
wwjay9
nkjackzhang
Rafiullah Hamedy
wycm
xiaokeliu666
contextshuffling
Ted M. Young
Tadaya Tsuyukubo
Roland Weisleder
aohana
Alessandro Falappa
Harald Brabenetz
Leonard Brünings