Prior to this commit, no exception was raised if a message could not
be converted to the requested payload because no suitable converter
were found.
This commit adds an explicit check if the converted payload is null.
Issue: SPR-11817
This commit revisits JmsMessagingTemplate and adds support for
receiving operations as well. JmsMessageSendingOperations has been
renamed to JmsMessageOperations.
The messaging abstraction did not split receiving and request-reply
operations. AbstractMessageReceivingTemplate has been created to hold
only the receiving operations.
Issue: SPR-11772
This commit adds a JMS implementation of MessageSendingOperations,
allowing to send JMS messages using Spring's standard Messaging
abstraction.
MessagingMessageConverter is a standard JMS's MessageConverter that
can convert Spring's Message to JMS message and vice versa. Existing
infrastructure has been updated to use this implementation.
Issue: SPR-11772
This change adds support for a custom "websocket" scope.
WebSocket-scoped beans may be injected into controllers with message
handling methods as well as channel interceptor registered on the
"inboundClientChannel".
Issue: SPR-11305
Before this change, subscribing to a user destination and use of
@SendToUser annotation required an authenticated user.
This change makes it possible to subscribe to a user destination from
WebSocket sessions without an authenticated user. In such cases the
destination is associated with one session only rather than with a
user (and all their sessions).
It is then also possible to send a message to a user destination
via "/user/{sessionId}/.." rather than "/user/{user}/...".
That means @SendToUser works relying on the session id of the input
message, effectively sending a reply to destination private to the
session.
A key use case for this is handling an exception with an
@MessageExceptionHandler method and sending a reply with @SendToUser.
Issue: SPR-11309
Removal of cached destination is now moved outside the for loop
that removes subscriptions to avoid ConcurrentModificationException.
Also since updateCache is a LinkedHashMap with accessOrder=true,
a simple access with updateCache.get() modify the map.
By iterating over updateCache.entrySet(), we avoid this update.
Issue: SPR-11755
Added the ability to send a message only to one user session. Given a
user has two tabs open and the client sends a message to the server
from tab 1, it is now possible to send a reply message to only 1 tab
instead of the default mode of targetting all known user sessions.
Issue: SPR-11506
DestinationCache is now used for both plain and pattern
destinations. It stores internally the subscriptions map for each
cached destination. Subscriptions are initially created when there
is no cache for the requested destination, and are updated when
subscriptions change.
Issue: SPR-11657
This change simplifies the implementation of the "test" EventPublisher
and MessageHandler used in the STOMP broker relay integration tests.
The updated implementations use a time-limted poll on a BlockingQueue.
The original fix for SPR-11423:
32e5f57e64
was insufficient when using an external broker since the original
destination header has to be in the "native headers" map (i.e. with
STOMP headers) in order to be included in messages broadcast by
the broker.
This commit replaces the "responseDestination" attribute on the
JmsListener annotation by a support of the standard SendTo annotation.
Issue: SPR-11707
This change modifies the names of the Reactor support classes in order
to align with the same changes in the 4.0.x line which now supports
both Reactor 1.1 and 1.0.
Issue: SPR-11636
This commit adds the support of JMS annotated endpoint. Can be
activated both by @EnableJms or <jms:annotation-driven/> and
detects methods of managed beans annotated with @JmsListener,
either directly or through a meta-annotation.
Containers are created and managed under the cover by a registry
at application startup time. Container creation is delegated to a
JmsListenerContainerFactory that is identified by the containerFactory
attribute of the JmsListener annotation. Containers can be
retrieved from the registry using a custom id that can be specified
directly on the annotation.
A "factory-id" attribute is available on the container element of
the XML namespace. When it is present, the configuration defined at
the namespace level is used to build a JmsListenerContainerFactory
that is exposed with the value of the "factory-id" attribute. This can
be used as a smooth migration path for users having listener containers
defined at the namespace level. It is also possible to migrate all
listeners to annotated endpoints and yet keep the
<jms:listener-container> or <jms:jca-listener-container> element to
share the container configuration.
The configuration can be fine-tuned by implementing the
JmsListenerConfigurer interface which gives access to the registrar
used to register endpoints. This includes a programmatic registration
of endpoints in complement to the declarative approach. A default
JmsListenerContainerFactory can also be specified to be used if no
containerFactory has been set on the annotation.
Annotated methods can have flexible method arguments that are similar
to what @MessageMapping provides. In particular, jms listener endpoint
methods can fully use the messaging abstraction, including convenient
header accessors. It is also possible to inject the raw
javax.jms.Message and the Session for more advanced use cases. The
payload can be injected as long as the conversion service is able to
convert it from the original type of the JMS payload. By
default, a DefaultJmsHandlerMethodFactory is used but it can be
configured further to support additional method arguments or to
customize conversion and validation support.
The return type of an annotated method can also be an instance of
Spring's Message abstraction. Instead of just converting the payload,
such response type allows to communicate standard and custom headers.
The JmsHeaderMapper infrastructure from Spring integration has also
been migrated to the Spring framework. SimpleJmsHeaderMapper is based
on SI's DefaultJmsHeaderMapper. The simple implementation maps all
JMS headers so that the generated Message abstraction has all the
information stored in the protocol specific message.
Issue: SPR-9882
An initial commit with expanded support for static resource handling:
- Add ResourceResolver strategy for resolving a request to a Resource
along with a few implementations.
- Add PublicResourceUrlProvider to get URLs for client-side use.
- Add ResourceUrlEncodingFilter and
PublicResourceUrlProviderExposingInterceptor along with initial
MVC Java config support.
Issue: SPR-10933
Introduce MessageHeaderInitializer strategy for initializing a
MessageHeaderAccessor.
Add IdTimestampMessageHeaderInitializer implementation that provides
control over ID and timestamp header generation.
Disable ID and timestamp by default in SimpMessageHeaderAccessor and
therefore its sub-class StompHeaderAccessor.
Issue: SPR-11468
The BufferingStompDecoder now decorates rather than extend
StompDecoder. This allows a single StompDecoder instance to be
configured and extended independantly while buffering remains a
separate concern.
AbstractMessageConverter and messaging template implementations now
detect and use mutable headers if passed in.
The SimpMessagingTemplate is optimized to supporting using a single
MessageHeaders instance while preparing a message.
This commit also updates code using the SimpMessagingTemplate to take
advantage of its new capabilities.
Issue: SPR-11468
Mutate rather than re-create headers when decoding STOMP messages
before a message is sent on a message channel.
Use MessageBuilder.createMessage to ensure the fully prepared
MessageHeaders is used directly MessageHeaderAccessor instance.
Issue: SPR-11468
Refine semantics of ID and TIMESTAMP headers provided to protected
MessageHeaders constructor.
Refactor internal implementation of MessageHeaderAccessor.
Support mutating headers from a single thread while a message is being
built (e.g. StompDecoder creating message + then adding session id).
Improve immutablity in NativeMessageHeaderAccessor and in
StompHeaderAccessor.
Optimize object creation for initializing messages and subsequent
accessing their headers.
Introduce MessageHeaderAccessorFactory support to enable applying a
common strategies for ID and TIMESTAMP generation to every message.
Add MessageBuilder shortcut factory method for creating messages from
payload and a full-prepared MessageHeaders instance. Also add
equivalent constructors to GenericMessage and ErrorMessage.
Issue: SPR-11468
The UserDestinationMessageHandler adds a header providing a hint for
what the original destination a user may have used when subscribing.
That is then used when writing messages back to WebSocket clients to
ensure they dont see the internally used, transformed user destination.
This change moves the header name constatn to make it more broadly
applicable. For example SPR-11645.
Prior to this commit, @SubscribeMapping mapped methods (backed with
@SendTo* annotations, or not) would send MESSAGEs with the wrong
destination. Instead of using the original SUBSCRIBE destination, it
would use the lookup path computed from the configured prefixes in the
application.
This commit fixes this issue - now @SubscribeMapping MESSAGEs use the
original SUBSCRIBE destination.
Issue: SPR-11648
This commit validates that the payload type of the message is
assignable to the one declared in the method signature. If that
is not the case, a meaningful exception message is thrown with
the types mismatch.
Prior to this commit, only the Message interface could be defined
in the method signature: it is now possible to define a sub-class
of Message if necessary which will match as long as the Message
parameter is assignable to that type.
Issue: SPR-11584
BufferingStompDecoder message buffer size limit can now be configured
with JavaConfig MessageBrokerRegistry.setMessageBufferSizeLimit() or
with XML <websocket:message-brocker message-buffer-size="">.
Issue: SPR-11527
Before this change the StompDecoder decoded and returned only the first
Message in the ByteBuffer passed to it. So to obtain all messages from
the buffer, one had to loop passing the same buffer in until no more
complete STOMP frames could be decoded.
This chage modifies StompDecoder to return List<Message> after
exhaustively decoding all available STOMP frames from the input buffer.
Also an overloaded decode method allows passing in Map that will be
populated with any headers successfully parsed, which is useful for
"peeking" at the "content-length" header.
This change also adds a BufferingStompDecoder sub-class which buffers
any content left in the input buffer after parsing one or more STOMP
frames. This sub-class can also deal with fragmented messages,
re-assembling them and parsing as a whole message.
Issue: SPR-11527
If a payload is present but conversion returns null (meaning no
converter knows how to convert), raise a MessageConversionException
that provides information about the type we were trying to convert
to and the message itself whose headers (namely content-type) contain
crucial information required to debug the problem.
Issue: SPR-11577
When no @Payload is provided, it is equivalent to @Payload with default
attribute values. Since the default value of required=true, then
an argument that's not annotated is required.
A payload that is required will now throw an appropriate exception
regardless of if a conversion is required or not.
isEmptyPayload now takes the payload instead of the message
so that both the original payload and the converted payload, if
necessary, share the same logic.
JSR-303 validation is now consistently applied.
Issue: SPR-11577
Prior to this commit, the codebase was using a mix of log4j.xml
and log4j.properties for test-related logging configuration. This
can be an issue as log4j takes the xml variant first when looking
for a default bootstrap configuration.
In practice, some modules declaring the properties variant were
taking the xml variant configuration from another module.
The general structure of the configuration has also been
harmonized to provide a standard console output as well as an
easy way to enable trace logs for the current module.
The clientInboundChannel and clientOutboundChannel now use twice
the number of available processors by default to accomodate for some
degree of blocking in task execution on average.
In practice these settings still need to be configured explicitly in
applications but these should serve as better default values than
the default values in ThreadPoolTaskExecutor.
Issue: SPR-11450
This change exposes the WebSocketSession attributes through a message header.
The StompSubProtocolHandler adds this to incoming messages.
For now messaging handling methods can access the map via @Header, e.g.:
@Header(StompHeaderAccessor.SESSION_ATTRIBUTES) Map<String, Object> attrs) {
Issue: SPR-11566
Use a custom ConfigReader to enforce the use of SynchronousDispatcher
and no other dispatchers otherwise created by default. Avoids the
creation thread pools never to be used.
Ignore DISCONNECT messages if already disconnected. This can occur if
the client explicitly sends a DISCONNECT frame and then closes the
socket quickly. The closing of the WebSocket sessions also sends a
DISCONNECT upstream to ensure the broker is aware.
Even though Netty is a required dependency of reactor-tcp at present,
there is no hard dependency in the spring-messaging Reactor-based
implementation.
Configure explicitly use of SynchronousDispatcher instead of the one
used otherwise by default (RingBufferDispatcher). As a result TCP
optations are now scoped to Netty's threads.
Remove Environment field. It is no longer required to shut it down
since we're now using SynchronousDispatcher by default.
Replace connection.in() with connection.consume() when composing
connection handling. The former creates a Stream for further composing,
e.g. via map(), filter() but all we need is to read a message.
Provide additional constructor that aceepts a pre-configured Reactor
TcpClient instance.
Issue: SPR-11531
Add accessor for brokerAvailable in AbstractBrokerMessageHandler
Ensure brokerAvailable is set even if eventPublisher is not
Add tests BrokerMessageHandlerTests
Turn off brokerAvailable when StompBrokerRelayMessageHandler stops
Actually stop message handling when brokerAvailable=false
Improve log messages
Issue: SPR-11563
After this change if a content-length header is provided but is less
than 0 or cannot be parsed as a number, it is ignored and the body
is read sequentially, i.e. until we reach a null byte terminator.
This provides better protection against clients that may set the
content-length header in error.
Issue: SPR-11528
Fix NPE exception when closing TcpConnection
Ensure a ConnectionHandler is cleared when a TcpConnection is closed
(at the same time), logging an exception if the closing fails.
Improve error messages.
Issue: SPR-11531
Before this change CompositeMessageConverter had a ContentTypeResolver
field that was in turn set on all contained converters.
After this change that field is removed and effectively
CompositeMessageConverter is a simple container of other converters.
Each converter in turn must have been configured with a
ContentTypeResolver.
Doing so means it is less likely to have unexpected consequences when
configuring converters, the ContentTypeResolver set in the composite
converter overriding the one configured in a contained converter.
Also commit 676ce6 added default ContentTypeResolver initialization
to AbstractMessageConverter, which ensures that converters are still
straight forward to configure.
Issue: SPR-11462
Previously AbstractMessageConverter did not have a ContentTypeResolver
configured by default. However the Java config and XML namespace in
spring-messaging and spring-websocket always configured one.
This change ensures every AbstractMessageConverter is configured with an
instance of DefaultContentTypeResolver by default. This makes sense since
all the resolver does is make an attempt to find a content type to use
for matching. If it can't it returns null and it's up to the converter
to decide whether it can convert or not.
Issue: SPR-11462
AbstractMessageConverter now supports a strictContentTypeMatching mode
in which the content type of a message must be resolved to a (non-null)
value that matches one of the configured supported MIME types in order
for the converter to be used.
Issue: SPR-11463
Before this change tests on the CI server showed the following message:
Store limit is 102400 mb, whilst the data directory:
/opt/.../KahaDB only has 74810 mb of usable space
This change turns off store persistence and also explicitly sets the
limit on memory usage.
Prior to this commit, one couldn't set the virtualHost property on
StompBrokerRelayMessageHandler via JavaConfig, since
StompBrokerRelayRegistration's API didn't offer that possibility.
This commit adds a new method in StompBrokerRelayRegistration's fluent
API to set the virtualHost used by StompBrokerRelayMessageHandler.
Note: this property is already configurable via xml config.
Issue: SPR-11433
Before this change, when a client subscribed to a "user" destination
(e.g. /user/foo), actual messages received in response to that
subscription contained the server-translated, unique user destination
(e.g. /foo-user123).
This is not an issue for clients such as stomp.js since the
subscription is unique and sufficient to match subscription responses.
However, other STOMP clients do additional checks on the destination
of the subscription and the response.
This change ensures that messages sent to clients on user destionations
always contain a destination that matches the one on the original
subscription.
Issue: SPR-11423
Before this change, issues surrounding the use of @Controller's in
combination with AOP proxying, resulted in an IllegalArgumentException
when trying to invoke the controller method.
This change detects such cases proactively and reports them with a
clear recommendation to use class-based proxying when it comes to
@Controller's. This is the most optimcal approach for controllers
in many respects, also allows @MVC annotations to remain on the
class.
The documentation has also been updated to have a specific section
on @Controller's and AOP proxying providing the same advice.
Issue:SPR-11281
Headers provided to the SimpMessagingTemplate's convertAndSend methods
are now automatically moved into the "nativeHeaders" sub-map. This
ensures the headers will go out with the STOMP message and be received
by subscribers.
Issue: SPR-11387
Assertions made in callbacks invoked on separate thread were not
reaching the test framework. This fix ensures failures are detected
and cause tests to fail.
Prior to this commit, all MethodMessageHandlers tests were
implemented in a single class. Since SimpAnnotationMsgHandler
has been refactored with an abstract class, tests also
needed such a refactoring.
This commit creates test fixtures for AbstractMethodMessageHandler.
Issue: SPR-11191
Prior to this commit, several spring-messaging exceptions
had defined serialVersionUIDs. Those exception aren't
supposed to leave the system via Java serialization; also,
their deserialization is supported only against the same
version of Spring.
Issue: SPR-11339
The interface is to be implemented in addition to
java.security.Principal when Principal.getName() is not globally unique
enough for use in user destinations.
Issue: SPR-11327
The @Header annotation in spring-messaging now resolves values from the
nested "nativeHeaders" map as well as top-level header map values.
In case of ambiguity (a value that exists in both), the top-level map
value is used and a warning message is printed. This is unlikly in most
cases but can be resolved by prefixing the header value with
"nativeHeadres.myHeader".
Issue: SPR-11326
DefaultUserDestinationResolver now uses the session id of
SUBSCRIBE/UNSUBSCRIBE messages rather than looking up all session id's
associated with a user.
Issue: SPR-11325
Before this change DefaultUserDestinationResolver provided a separate
destination prefix property for identifying "user" destinations in
subscription requests as opposed to in sent messages. Such a separate
property should not be needed.
Issue: SPR-11263
Configurers and BeanDefinitionParsers should use
OptionalValidatorFactoryBean instead of
LocalValidatorFactoryBean.
The Optional implementation catches and logs setup
exceptions, useful when a validation API is present on
the classpath but not the actual implementation.
Issue: SPR-11272
Payload parameters in @MessageMapping annotated
methods can now also be validated when annotated
with a Validation annotation (@Valid, @Validated...).
A default Validator is registered by the MessageBroker
Configurer, but it is possible to provide a list of custom
validators as well.
Issue: SPR-11185
Since the MessageHeaders constructor is makes a copy of the headers and
is protected against a null map, there is no need for the same to be
done in GenericMessage.
Issue: SPR-11268
Fix a potential race condition with GenericMessagingTemplate's inner
TemporaryReplyChannel class.
Prior to this commit the `hasReceived` member variable was read after
calling `replyLatch.countDown()`.
Issue: SPR-11206
This commit adds an XML namespace equivalent of @EnableWebSocket and
@EnableWebSocketMessageBroker. Those are <websocket:handlers> and
<websocket:message-broker> respectively.
Examples can be found in the test suite.
This commit also alters the way MessageHandler's subscribe to their
respective MessageChannel's of interest. Rather than performing the
subscriptions in configuration code, the message channels are now
passed into MessageHandler's so they can subscribe themselves on
startup.
Issue: SPR-11063
Apply consistent styling to new classes introduced in Spring 4.0.
- Javadoc line wrapping, whitespace and formatting
- General code whitespace
- Consistent Assert.notNull messages
@EnableWebSocketMessageBroker message channel configuration can now be
customized via WebSocketMessageBrokerConfigurer. It is necessary to
make this easy and even required as part of the basic configuration
since by default the message channels are backed by a thread pool of
size 1, not suitable for production use.
Issue: SPR-11023
Fix a variety of typos throughout the project, primarily in
comments (javadoc or otherwise) but also in a handful of log messages
and a couple exception messages.
ISSUE: SPR-11123
Fix remaining Java compiler warnings, mainly around missing
generics or deprecated code.
Also add the `-Werror` compiler option to ensure that any future
warnings will fail the build.
Issue: SPR-11064
Before this change spring-messaging contained a few WebSocket-related
classes including WebSocket sub-protocol support for STOMP as well
as @EnableWebSocketMessageBroker and related configuration classes.
After this change those classes are located in the spring-websocket
module under org.springframework.web.socket.messaging.
This means the following classes in application configuration must
have their packages updated:
org.springframework.web.socket.messaging.config.EnableWebSocketMessageBroker
org.springframework.web.socket.messaging.config.StompEndpointRegistry
org.springframework.web.socket.messaging.config.WebSocketMessageBrokerConfigurer
MessageBrokerConfigurer has been renamed to MessageBrokerRegistry and
is also located in the above package.
Also @SubscribeMapping is now a method-level annotation only that can
be used in combination with a type-level @MessageMapping.
This method also documents supported method arguments and return value
types on @Subscribe- and @MessageMapping methods.
Previously, StompDecoder would throw a StompConversionException when
it attempted to decode a Buffer that contained an incomplete frame.
This commit updates StompDecoder to return null when it encounters an
incomplete frame. It also resets the buffer, thereby allowing the
decode to be reattempted once more data has been received.
StompCodec's decoder function has been updated to stop attempting to
decode a Buffer when StompDecoder returns null.
Issue: SPR-11088
Before this change the amount of logging was too little or too much
with TRACE turned on. This change separates useful debugging
information and logs it under DEBUG and leaves more detailed
information to be logged under TRACE.
Declare SubscribableChannel @Beans in
WebSocketMessageBrokerConfigurationSupport as
AbstractSubscribableChannel to avoid the need for casting when
registering interceptors.
Issue: SPR-11065
Before this change subscribing to a user-specific destination in STOMP
required manually appending a unique queue suffix provided in a header
with the CONNECTED frame.
This change removes the need to do that. Instead STOMP clients can
subscribe to "/user/queue/error" and can then begin to receive messages
sent to "/user/{username}/queue/error" without colliding with any other
user doing the same.
Issue: SPR-11077
Juergen Hoeller
Stephane Nicoll
Rossen Stoyanchev
Sebastien Deleuze
Mark Galea
Philippe Marschall
Gary Russell
Brian Clozel
Sam Brannen
Phillip Webb
Eric Dahl
Andy Wilkinson