This turned into the extraction of a common AbstractResourceBasedMessageSource base class which not only features addBasenames but also getBasenameSet and setCacheMillis.
Issue: SPR-10314
Prior to this change SpEL did not have an syntactic
construct enabling easy access to a FactoryBean. With this
change it is now possible to use &foo in an expression when
the factory bean should be returned.
Issue: SPR-9511
This change updates all cases where callbacks are invoked to catch and
suppress errors (since there is not match to do with and error from
a callback be it success or failure).
Also updated is the contract itself to clarify this and emphasize the
callbacks are really notifications for the outcome of the
ListenableFuture not the callbacks themselves.
Issue: SPR-13785
ConcurrentMapCacheManager and ConcurrentMapCache now support the
serialization of cache entries via a new `storeByValue` attribute. If it is
explicitly enabled, the cache value is first serialized and that content
is stored in the cache.
The net result is that any further change made on the object returned
from the annotated method is not applied on the copy held in the cache.
Issue: SPR-13758
Previously, if a `@Cacheable` method was accessed with the same key by
multiple threads, the underlying method was invoked several times instead
of blocking the threads while the value is computed. This scenario
typically affects users that enable caching to avoid calling a costly
method too often. When said method can be invoked by an arbitrary number
of clients on startup, caching has close to no effect.
This commit adds a new method on `Cache` that implements the read-through
pattern:
```
<T> T get(Object key, Callable<T> valueLoader);
```
If an entry for a given key is not found, the specified `Callable` is
invoked to "load" the value and cache it before returning it to the
caller. Because the entire operation is managed by the underlying cache
provider, it is much more easier to guarantee that the loader (e.g. the
annotated method) will be called only once in case of concurrent access.
A new `sync` attribute to the `@Cacheable` annotation has been addded.
When this flag is enabled, the caching abstraction invokes the new
`Cache` method define above. This new mode bring a set of limitations:
* It can't be combined with other cache operations
* Only one `@Cacheable` operation can be specified
* Only one cache is allowed
* `condition` and `unless` attribute are not supported
The rationale behind those limitations is that the underlying Cache is
taking care of the actual caching operation so we can't really apply
any SpEL or multiple caches handling there.
Issue: SPR-9254
Previously, if a managed bean had only one non-default constructor, we
should still annotate it with `@Autowired` to properly use constructor
injection. Not doing so resulted in an error as the container was
trying to call the default (non-existing) constructor.
This commit updates this behaviour to automatically applyed the
autowiring semantic to any bean that has only one constructor. As
before, if more than one constructor is defined, `@Autowired` must be
specified to teach the container the constructor it has to use.
Issue: SPR-12278
Also switches 4.2.4's new formatter implementations to package visibility, just in case they'll be superseded by another variant in the future.
Issue: SPR-13730
With this change the MapAccessor now extends CompilablePropertyAccessor
rather than just PropertyAccessor. This means that any expression that
ends up using the MapAccessor is now compilable for fast performance.
Issue: SPR-13638
Even though the JSR-107 spec forbids to store null values, our cache
abstraction allows that behaviour with a special handled (and this is
the default behaviour).
While this was working fine with our own set of annotations, the
JSR-107 interceptor counterpart was interpreting the spec sensu strictu.
We now allow for that special case as well.
Issue: SPR-13641
This commit migrates all remaining tests from JUnit 3 to JUnit 4, with
the exception of Spring's legacy JUnit 3.8 based testing framework that
is still in use in the spring-orm module.
Issue: SPR-13514
Also revised StandardScriptFactory for finer-grained template methods, added further configuration variants to StandardScriptEvaluator, and identified thread-local ScriptEngine instances in ScriptTemplateView by appropriate key.
Issue: SPR-13491
Issue: SPR-13487
This commit introduces ignored, failing tests that demonstrate that the
@Cache* annotations are not yet supported as merged composed annotations.
Issue: SPR-13475
SPR-11512 introduced support for annotation attribute aliases via
@AliasFor, requiring the explicit declaration of the 'attribute'
attribute. However, for aliases within an annotation, this explicit
declaration is unnecessary.
This commit improves the readability of alias pairs declared within an
annotation by introducing a 'value' attribute in @AliasFor that is an
alias for the existing 'attribute' attribute. This allows annotations
such as @ContextConfiguration from the spring-test module to declare
aliases as follows.
public @interface ContextConfiguration {
@AliasFor("locations")
String[] value() default {};
@AliasFor("value")
String[] locations() default {};
// ...
}
Issue: SPR-13289
In addition to specifying the event type to listen to via a method
parameter, any @EventListener annotated method can now alternatively
define the event type(s) to listen to via the "classes" attributes (that
is aliased to "value").
Something like
@EventListener({FooEvent.class, BarEvent.class})
public void handleFooBar() { .... }
Issue: SPR-13156
Prior to this commit, the implementation of getRepeatableAnnotation()
in Spring's AnnotationUtils complied neither with the contract of
getAnnotationsByType() nor with the contract of
getDeclaredAnnotationsByType() as defined in AnnotatedElement in Java 8.
Specifically, unexpected results can be encountered when using Spring's
support for @Repeatable annotations: either annotations show up in the
returned set in the wrong order, or annotations are returned in the set
that should not even be found based on the semantics of @Repeatable.
This commit remedies this problem by deprecating the existing
getRepeatableAnnotation() methods and replacing them with new
getRepeatableAnnotations() and getDeclaredRepeatableAnnotations()
methods that comply with the contracts of Java's getAnnotationsByType()
and getDeclaredAnnotationsByType(), respectively.
Issue: SPR-13068
In AnnotatedElementUtils, all methods pertaining to merging annotation
attributes have been renamed to "getMerged*()" and "findMerged*()"
accordingly. Existing methods such as getAnnotationAttributes(..) have
been deprecated in favor of the more descriptive "merged" variants.
This aligns the naming conventions in AnnotatedElementUtils with those
already present in AnnotationReadingVisitorUtils.
The use of "annotationType" as a variable name for the fully qualified
class name of an annotation type has been replaced with
"annotationName" in order to improve the readability and intent of the
code base.
In MetaAnnotationUtils.AnnotationDescriptor, getMergedAnnotation() has
been renamed to synthesizeAnnotation(), and the method is now
overridden in UntypedAnnotationDescriptor to always throw an
UnsupportedOperationException in order to avoid potential run-time
ClassCastExceptions.
Issue: SPR-11511
Provide a mean to detect the actual ResolvableType based on a instance as
a counter measure to type erasure.
Upgrade the event infrastructure to detect if the event (or the payload)
implements such interface. When this is the case, the return value of
`getResolvableType` is used to validate its generic type against the
method signature of the listener.
Issue: SPR-13069
While working on SPR-12532, an extra IdentityWrapper was added to work
around a backward compatible issue between commons pool 1.x and 2.x. This
issue (POOL-283) has actually been fixed in 2.4 and their IdentityWrapper
is using object equality so our wrapper is in the way.
Looking retrospectively, the code looks all fine without the workaround
and commons pool 2.4 or later so it has been removed.
Since Spring 4.1, a CacheResolver may be configured to customize the way
the cache(s) to use for a given cache operation are retrieved. Since a
CacheResolver implementation may not use the cache names information at
all, this attribute has been made optional.
However, a fix was still applied, preventing a Cache operation without a
cache name to be defined properly. We now allow this valid use case.
Issue: SPR-13081
This commit introduces new 'cacheNames' attributes (analogous to the
existing attribute of the same name in @CacheConfig) as aliases for the
'value' attributes in @Cacheable, @CachePut, and @CacheEvict.
In addition, SpringCacheAnnotationParser.getAnnotations() has been
refactored to support synthesized annotations.
Issue: SPR-11393
Prior to this commit, @ComponentScan already had a value/basePackages
alias pair; however, the semantics were not properly enforced.
This commit addresses this issue by refactoring
ComponentScanAnnotationParser to ensure that it is not possible to
declare both of the aliased attributes. In addition, the 'value' and
'basePackages' attributes are now annotated with @AliasFor in order to
make the semantics clearer.
Issue: SPR-11393
Spring Framework 4.2 RC1 introduced support for synthesizing an
annotation from an existing annotation in order to provide additional
functionality above and beyond that provided by Java. Specifically,
such synthesized annotations provide support for @AliasFor semantics.
As luck would have it, the same principle can be used to synthesize an
annotation from any map of attributes, and in particular, from an
instance of AnnotationAttributes.
The following highlight the major changes in this commit toward
achieving this goal.
- Introduced AnnotationAttributeExtractor abstraction and refactored
SynthesizedAnnotationInvocationHandler to delegate to an
AnnotationAttributeExtractor.
- Extracted code from SynthesizedAnnotationInvocationHandler into new
AbstractAliasAwareAnnotationAttributeExtractor and
DefaultAnnotationAttributeExtractor implementation classes.
- Introduced MapAnnotationAttributeExtractor for synthesizing an
annotation that is backed by a map or AnnotationAttributes instance.
- Introduced a variant of synthesizeAnnotation() in AnnotationUtils
that accepts a map.
- Introduced findAnnotation(*) methods in AnnotatedElementUtils that
synthesize merged AnnotationAttributes back into an annotation of the
target type.
The following classes have been refactored to use the new support for
synthesizing AnnotationAttributes back into an annotation.
- ApplicationListenerMethodAdapter
- TestAnnotationUtils
- AbstractTestContextBootstrapper
- ActiveProfilesUtils
- ContextLoaderUtils
- DefaultActiveProfilesResolver
- DirtiesContextTestExecutionListener
- TestPropertySourceAttributes
- TestPropertySourceUtils
- TransactionalTestExecutionListener
- MetaAnnotationUtils
- MvcUriComponentsBuilder
- RequestMappingHandlerMapping
In addition, this commit also includes changes to ensure that arrays
returned by synthesized annotations are properly cloned first.
Issue: SPR-13067
This commit introduces first-class support for aliases for annotation
attributes. Specifically, this commit introduces a new @AliasFor
annotation that can be used to declare a pair of aliased attributes
within a single annotation or an alias from an attribute in a custom
composed annotation to an attribute in a meta-annotation.
To support @AliasFor within annotation instances, AnnotationUtils has
been overhauled to "synthesize" any annotations returned by "get" and
"find" searches. A SynthesizedAnnotation is an annotation that is
wrapped in a JDK dynamic proxy which provides run-time support for
@AliasFor semantics. SynthesizedAnnotationInvocationHandler is the
actual handler behind the proxy.
In addition, the contract for @AliasFor is fully validated, and an
AnnotationConfigurationException is thrown in case invalid
configuration is detected.
For example, @ContextConfiguration from the spring-test module is now
declared as follows:
public @interface ContextConfiguration {
@AliasFor(attribute = "locations")
String[] value() default {};
@AliasFor(attribute = "value")
String[] locations() default {};
// ...
}
The following annotations and their related support classes have been
modified to use @AliasFor.
- @ManagedResource
- @ContextConfiguration
- @ActiveProfiles
- @TestExecutionListeners
- @TestPropertySource
- @Sql
- @ControllerAdvice
- @RequestMapping
Similarly, support for AnnotationAttributes has been reworked to
support @AliasFor as well. This allows for fine-grained control over
exactly which attributes are overridden within an annotation hierarchy.
In fact, it is now possible to declare an alias for the 'value'
attribute of a meta-annotation.
For example, given the revised declaration of @ContextConfiguration
above, one can now develop a composed annotation with a custom
attribute override as follows.
@ContextConfiguration
public @interface MyTestConfig {
@AliasFor(
annotation = ContextConfiguration.class,
attribute = "locations"
)
String[] xmlFiles();
// ...
}
Consequently, the following are functionally equivalent.
- @MyTestConfig(xmlFiles = "test.xml")
- @ContextConfiguration("test.xml")
- @ContextConfiguration(locations = "test.xml").
Issue: SPR-11512, SPR-11513
Previously, a Bean implementing `AutoCloseable` (or `Closeable`) was
always destroyed regardless of its bean definition. In particular, the
documented way of disabling the destruction callback via an empty String
did not work.
AutoCloseable beans are now treated pretty much as any other bean: we
still use the presence of the interface to optimize the check of a
destroy method and we only auto-discover the method name to invoke if
the inferred mode is enabled.
Issue: SPR-13022
In general, the Spring Framework aims to construct error message
strings only if an actual error has occurred. This seems to be the
common pattern in the codebase and saves both CPU and memory. However,
there are some places where eager error message formatting occurs
unnecessarily.
This commit addresses this issue in the following classes:
AdviceModeImportSelector, AnnotationAttributes, and
ReadOnlySystemAttributesMap.
The change in ReadOnlySystemAttributesMap also avoids a potential
NullPointerException.
Issue: SPR-13007
Making sure that `GenericApplicationListenerAdapter` implements
`SmartApplicationListener` again as older code may try to cast an
instance to `SmartApplicationListener`.
Issue: SPR-8201
This commit introduces support for finding annotations on abstract,
bridge, and interface methods in AnnotatedElementUtils.
- Introduced dedicated findAnnotationAttributes() methods in
AnnotatedElementUtils that provide first-class support for
processing methods, class hierarchies, interfaces, bridge methods,
etc.
- Introduced find/get search algorithm dichotomy in
AnnotatedElementUtils which is visible in the public API as well as
in the internal implementation. This was necessary in order to
maintain backwards compatibility with the existing API (even though
it was undocumented).
- Reverted all recent changes made to the "get semantics" search
algorithm in AnnotatedElementUtils in order to ensure backwards
compatibility, and reverted recent changes to
JtaTransactionAnnotationParser and SpringTransactionAnnotationParser
accordingly.
- Documented internal AnnotatedElementUtils.Processor<T> interface.
- Enabled failing tests and introduced
findAnnotationAttributesFromBridgeMethod() test in
AnnotatedElementUtilsTests.
- Refactored ApplicationListenerMethodAdapter.getCondition() and
enabled failing test in TransactionalEventListenerTests.
- AnnotationUtils.isInterfaceWithAnnotatedMethods() is now package
private.
Issue: SPR-12738, SPR-11514, SPR-11598
Previously, a cache infrastructure with only a CacheResolver would have
worked fine until the JSR-107 API is added to the classpath. When this is
the case, the JCache support kicks in and an exception cache resolver is
all of the sudden required.
The CacheResolver _is_ different as the default implementation does look
different attributes so if a custom CacheResolver is set, it is not
possible to "reuse" it as a fallback exception CacheResolver.
Now, an exception CacheResolver is only required if a JSR-107 annotation
with an "exceptionCacheName" attribute is processed (i.e. the exception
CacheResolver is lazily instantiated if necessary).
The use case of having a CachingConfigurerSupport with only a
CacheResolver was still broken though since the JCache support only looks
for a JCacheConfigurer bean (per the generic type set on
AbstractCachingConfiguration). This has been fixed as well.
Issue: SPR-12850
Covers ReflectionUtils.doWithMethods as well as affected annotation post-processors.
Includes an extension of MethodMetadata for the detection of @Bean default methods.
Issue: SPR-12822
Issue: SPR-10919
If a sub-class of Future (such as ListenableFuture) is used as a return
type and an exception is thrown, the AsyncUncaughtExceptionHandler is
called. Now checking for any Future implementation instead of a faulty
strict matching.
Issue: SPR-12797
This commit ensures that @NumberFormat can be used as a
meta-annotation, as was already the case for @DateTimeFormat.
In addition, this commit polishes FormattingConversionServiceTests and
MvcNamespaceTests.
Issue: SPR-12743
Previously, adding `@EnableAsync` on a blank application would lead to an
info message stating that `ProxyAsyncConfiguration` is not eligible for
getting processed by all BeanPostProcessors. Concretely, this is ok as
such internal configuration is not meant to be a target of such post
processing.
Revisit the condition for non infrastructure bean only. Add the
infrastructure role to a set of internal configuration, including the
`ProxyAsyncConfiguration`.
Issue: SPR-12761
Prior to this commit, the GroovyBeanDefinitionReader claimed (via its
Javadoc) that it fully supported XML configuration files in addition to
its Groovy DSL; however, this was unfortunately inaccurate since XML
validation was disabled by default which led to certain features of XML
configuration not working. For example, it was impossible to define a
<qualifier> in an XML config file without specifying the 'type'
attribute (which has a default value defined in the spring-beans XSD).
This commit fixes this issue by ensuring that bean definitions in XML
resources are loaded with a "standard" XmlBeanDefinitionReader that is
created with default settings (i.e., with XML validation enabled). With
regard to backwards compatibility, bean definitions defined using the
Groovy DSL are still loaded with an XmlBeanDefinitionReader that has
XML validation disabled by default which is necessary for proper
parsing of the Groovy DSL.
Issue: SPR-12769
Juergen Hoeller
Sam Brannen
Stephane Nicoll
Andy Clement
Rossen Stoyanchev
Ben Manes
Johnny Lim
Martin Macko
Kamil Szymanski
Elizabeth Chatman
Philippe Marschall
Kazuki Shimizu