Previously TLSProxy only knew how to "repack" messages for TLSv1.3.
Most of the handshake in <= TLSv1.2 is unencrypted so this hasn't been
too much of restriction. However we now want to modify reneg handshakes
which are encrypted so we need to add that capability.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Because there was a bug in File::Spec::Unix' abs2rel when it was given
relative paths as both PATH and BASE arguments, the directories we
deal with were made to be all absolute. Unfortunately, this meant
getting paths in our verbose test output which are difficult to use
anywhere else (such as a separate test build made for comparison), due
to the constant need to edit all the paths all the time.
We're therefore getting back the relative paths, by doing an extra
abs2rel() in __srctop_file, __srctop_dir, __bldtop_file and
__bldtop_dir, with a 'Cwd::getcwd' call as BASE argument.
Fixes#10628
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10913)
(cherry picked from commit 612539e8a6)
We also use this in test_tls13messages to check that the extensions we
expect to see in a CertificateRequest are there.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9780)
(cherry picked from commit dc5bcb88d8)
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9295)
If SRCTOP != BLDTOP, and SRCTOP is given in relative form, e.g.
"./config ../openssl", then a bug in Perl's abs2rel may trigger that directory-
rewriting in __cwd results in wrong entries in %directories under certain
circumstances, e.g. when a test executes run(app(["openssl"]) after indir.
There should not be any need to go to a higher directory from BLDDIR or SRCDIR,
so it should be OK to use them in their absolute form, also resolving all
possible symlinks, right from the start.
Following the File::Spec::Functions bug description (reported to perl.org):
When abs2rel gets a path argument with ..s that are crossing over the ..s
trailing the base argument, the result is wrong.
Example
PATH: /home/goal/test/..
BASE: /home/goal/test/../../base
Good result: ../goal
Bad result: ../..
Bug verified with File::Spec versions
- 3.6301
- 3.74 (latest)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7031)
(cherry picked from commit 7a2027240e)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Backport-of: https://github.com/openssl/openssl/pull/8092
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8134)
This was complicated by the fact that we were using this extension for our
duplicate extension handling tests. In order to add tests for cryptopro
bug the duplicate extension handling tests needed to change first.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7984)
(cherry picked from commit 9effc496ad)
Test that a server can handle an unecrypted alert when normally the next
message is encrypted.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
This enables us to require module versions, and to fall back to a
bundled version if the system version is too low.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6682)
s_server -rev emits info output on stderr, i.e. unbufferred, which
risks intermixing with output from TLSProxy itself on non-line
boundaries, which in turn is confusing to TAP parser.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5975)
Original condition was susceptible to race condition...
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5933)
Bind even test/ssltest_old.c to loopback interface. This allows to avoid
unnecessary alerts from Windows and Mac OS X firewalls.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5933)
Address the concern that commit c53c2fec raised differently.
The original direction of the traffic is encoded in bit 0
of the flight number.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5923)
The failure is "impossible", because we have confirmation that s_server
listens, yet Mac OS X fails to connect. This avoids 10 minutes timeout
on Travis CI.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5907)
On rare occasion 's_server | perl -ne print' can complete before
corresponding waitpid, which on Windows can results in -1 return
value. This is not an error, don't treat it like one. Collect
even return value from s_server.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5907)
For test recipes that want to use the directory of the data directory
or a subdirectory thereof, rather than just individual files.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5928)
Original logic was "if no records found *or* last one is truncated, then
leave complete records in queue." Trouble is that if we don't pass on
complete records and get complete packet in opposite direction, then
queued records will go back to sender. In other words complete records
should always be passed on. [Possible alternative would be to match
direction in reconstruct_record.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5887)
By asking for port 0, you get a free port dynamically assigned by OS.
TLSProxy::Proxy now asks for 0 and asks s_server to do the same. The
s_server's port is reported in "ACCEPT" line, which TLSProxy::Proxy
parses and uses.
Because the server port is now a random affair in TLSProxy::Proxy,
it's no longer possible to change it with the method 'server_port',
and it has become an accessor only. For the sake of orthogonality, so
has the method 'server_addr'.
Remove all fork calls on Windows, as fork is not to be trusted there.
This naturally minimized amount of fork calls on POSIX systems, to 1.
Sink s_server's output to 'perl -ne print' which ensures that output
is written strictly in lines. This keeps TAP parser happy.
Improve synchronization in -naccept +n cases by establishing next
connection to s_server *after* s_client finishes instead of before it
starts.
Improve error handling and clean up some methods.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5843)
test/cipherlist_test.c is an internal consistency check, and therefore
requires that the shared library it runs against matches what it was
built for. test/recipes/test_cipherlist.t is made to refuse running
unless library version and build version match.
This adds a helper program test/versions.c, that simply displays the
library and the build version.
Partially fixes#5751
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5753)
(cherry picked from commit cde87deafa)
The previous commit causes some tests to hang so we temporarily disable them.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5757)
With the current mechanism, old cipher strings that used to work in 1.1.0,
may inadvertently disable all TLSv1.3 ciphersuites causing connections to
fail. This is confusing for users.
In reality TLSv1.3 are quite different to older ciphers. They are much
simpler and there are only a small number of them so, arguably, they don't
need the same level of control that the older ciphers have.
This change splits the configuration of TLSv1.3 ciphers from older ones.
By default the TLSv1.3 ciphers are on, so you cannot inadvertently disable
them through your existing config.
Fixes#5359
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5392)
When the proxy re-encrypted a TLSv1.3 record it was adding a spurious
byte onto the end. This commit removes that.
The "extra" byte was intended to be the inner content type of the record.
However, TLSProxy was actually adding the original encrypted data into the
record (which already has the inner content type in it) and then adding
the spurious additional content type byte on the end (and adjusting the
record length accordingly).
It is interesting to look at why this didn't cause a failure:
The receiving peer first attempts to decrypt the data. Because this is
TLSProxy we always use a GCM based ciphersuite with a 16 byte tag. When
we decrypt this it actually gets diverted to the ossltest engine. All this
does is go through the motions of encrypting/decrypting but just passes
back the original data. Crucially it will never fail because of a bad tag!
The receiving party thinks the spurious additional byte is part of the
tag and the ossltest engine ignores it.
This means the data that gets passed back to the record layer still has
an additional spurious byte on it - but because the 16 byte tag has been
removed, this is actually the first byte of the original tag. Again
because we are using ossltest engine we aren't actually creating "real"
tags - we only ever emit 16, 0 bytes for the tag. So the spurious
additional byte always has the value 0. The TLSv1.3 spec says that records
can have additional 0 bytes on the end of them - this is "padding". So the
record layer interprets this 0 byte as padding and strips it off to end up
with the originally transmitted record data - which it can now process
successfully.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5370)
Add SSL_verify_client_post_handshake() for servers to initiate PHA
Add SSL_force_post_handshake_auth() for clients that don't have certificates
initially configured, but use a certificate callback.
Update SSL_CTX_set_verify()/SSL_set_verify() mode:
* Add SSL_VERIFY_POST_HANDSHAKE to postpone client authentication until after
the initial handshake.
* Update SSL_VERIFY_CLIENT_ONCE now only sends out one CertRequest regardless
of when the certificate authentication takes place; either initial handshake,
re-negotiation, or post-handshake authentication.
Add 'RequestPostHandshake' and 'RequirePostHandshake' SSL_CONF options that
add the SSL_VERIFY_POST_HANDSHAKE to the 'Request' and 'Require' options
Add support to s_client:
* Enabled automatically when cert is configured
* Can be forced enabled via -force_pha
Add support to s_server:
* Use 'c' to invoke PHA in s_server
* Remove some dead code
Update documentation
Update unit tests:
* Illegal use of PHA extension
* TLSv1.3 certificate tests
DTLS and TLS behave ever-so-slightly differently. So, when DTLS1.3 is
implemented, it's PHA support state machine may need to be different.
Add a TODO and a #error
Update handshake context to deal with PHA.
The handshake context for TLSv1.3 post-handshake auth is up through the
ClientFinish message, plus the CertificateRequest message. Subsequent
Certificate, CertificateVerify, and Finish messages are based on this
handshake context (not the Certificate message per se, but it's included
after the hash). KeyUpdate, NewSessionTicket, and prior Certificate
Request messages are not included in post-handshake authentication.
After the ClientFinished message is processed, save off the digest state
for future post-handshake authentication. When post-handshake auth occurs,
copy over the saved handshake context into the "main" handshake digest.
This effectively discards the any KeyUpdate or NewSessionTicket messages
and any prior post-handshake authentication.
This, of course, assumes that the ID-22 did not mean to include any
previous post-handshake authentication into the new handshake transcript.
This is implied by section 4.4.1 that lists messages only up to the
first ClientFinished.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4964)
Bernd Edlinger
Matt Caswell
Richard Levitte
Veres Lajos
Antoine Cœur
Martin Peylo
Sam Roberts
Matthias Kraft
David von Oheimb
Andy Polyakov
Todd Short