* Call `Mod:format_state/1` if exported to possibly truncate huge states
* Add more information about truncated ram_pending_ack and disk_pending_ack
* Add `log.error_logger_format_depth` cuttlefish schema value
* Add `format_state/1` to `rabbit_channel`
* Add `log.summarize_process_state`, default is `false`, to enable summarizing process state for crash logs.
* Added `format_state` to `rabbit_classic_queue_index_v2` and `rabbit_classic_queue_store_v2`
* Ensure `rabbit_channel:format_state/1` uses `summarize_process_state_when_logged`
* Do not set `summarize_process_state_when_logged` value by default.
This commit makes read operations for the following Khepri projections much cheaper:
* rabbit_khepri_queue
* rabbit_khepri_exchange
* rabbit_khepri_index_route
* rabbit_khepri_topic_trie
Entries in these ETS tables are read for every message entering RabbitMQ.
Some messages entering RabbitMQ will cause even multiple reads from
these ETS tables, e.g. multiple reads from `rabbit_khepri_queue` if a message
is routed to more than one queue or multiple reads from `rabbit_khepri_index_route`
if a message has multiple routing keys.
On a busy RabbitMQ node, these tables are read concurrently (on multiple physical processors)
hundreds of thousands of times per second.
There can be at most one consumer per volatile queue instance.
This consumer must also have attached on the same channel/session as the
creator of the queue.
Prior to this commit, it was possible for clients on other
connections or sessions to attach a receiving link to an existing volatile
queue name, even though no messages would be delivered.
It's better for RabbitMQ to directly refuse the link at attach time.
# What?
* Support Direct Reply-To for AMQP 1.0
* Compared to AMQP 0.9.1, this PR allows for multiple volatile queues on a single
AMQP 1.0 session. Use case: JMS clients can create multiple temporary queues on
the same JMS/AMQP session:
* https://jakarta.ee/specifications/messaging/3.1/apidocs/jakarta.messaging/jakarta/jms/session#createTemporaryQueue()
* https://jakarta.ee/specifications/messaging/3.1/apidocs/jakarta.messaging/jakarta/jms/jmscontext#createTemporaryQueue()
* Fix missing metrics in for Direct Reply-To in AMQP 0.9.1, e.g.
`messages_delivered_total`
* Fix missing metrics (even without using Direct Reply-To ) in AMQP 0.9.1:
If stats level is not `fine`, global metrics `rabbitmq_global_messages_delivered_*` should still be incremented.
# Why?
* Allow for scalable at-most-once RPC reply delivery
Example use case: thousands of requesters connect, send a single
request, wait for a single reply, and disconnect.
This PR won't create any queue and won't write to the metadata store.
Therefore, there's less pressure on the metadata store, less pressure
on the Management API when listing all queues, less pressure on the
metrics subsystem, etc.
* Feature parity with AMQP 0.9.1
# How?
This PR extracts the previously channel specific Direct Reply-To code
into a new queue type: `rabbit_volatile_queue`.
"Volatile" describes the semantics, not a use-case. It signals non-durable,
zero-buffer, at-most-once, may-drop, and "not stored in Khepri."
This new queue type is then used for AMQP 1.0 and AMQP 0.9.1.
Sending to the volatile queue is stateless like previously with Direct Reply-To in AMQP 0.9.1 and like done
for the MQTT QoS 0 queue.
This allows for use cases where a single responder replies to e.g. 100k different requesters.
RabbitMQ will automatically auto grant new link-credit to the responder because the new queue type confirms immediately.
The key gets implicitly checked by the channel/session:
If the queue name (including the key) doesn’t exist, the `handle_event` callback for this queue isn’t invoked and therefore
no delivery will be sent to the responder.
This commit supports Direct Reply-To across AMQP 1.0 and 0.9.1. In other
words, the requester can be an AMQP 1.0 client while the responder is an
AMQP 0.9.1 client or vice versa.
RabbitMQ will internally convert between AMQP 0.9.1 `reply_to` and AMQP
1.0 `/queues/<queue>` address. The AMQP 0.9.1 `reply_to` property is
expected to contain a queue name. That's in line with the AMQP 0.9.1
spec:
> One of the standard message properties is Reply-To, which is designed
specifically for carrying the name of reply queues.
Compared to AMQP 0.9.1 where the requester sets the `reply_to` property
to `amq.rabbitmq.reply-to` and RabbitMQ modifies this field when
forwarding the message to the request queue, in AMQP 1.0 the requester
learns about the queue name from the broker at link attachment time.
The requester has to set the reply-to property to the server generated
queue name. That's because the server isn't allowed to modify the bare
message.
During link attachment time, the client has to set certain fields.
These fields are expected to be set by the RabbitMQ client libraries.
Here is an Erlang example:
```erl
Source = #{address => undefined,
durable => none,
expiry_policy => <<"link-detach">>,
dynamic => true,
capabilities => [<<"rabbitmq:volatile-queue">>]},
AttachArgs = #{name => <<"receiver">>,
role => {receiver, Source, self()},
snd_settle_mode => settled,
rcv_settle_mode => first},
{ok, Receiver} = amqp10_client:attach_link(Session, AttachArgs),
AddressReplyQ = receive {amqp10_event, {link, Receiver, {attached, Attach}}} ->
#'v1_0.attach'{source = #'v1_0.source'{address = {utf8, Addr}}} = Attach,
Addr
end,
```
The client then sends the message by setting the reply-to address as
follows:
```erl
amqp10_client:send_msg(
SenderRequester,
amqp10_msg:set_properties(
#{message_id => <<"my ID">>,
reply_to => AddressReplyQ},
amqp10_msg:new(<<"tag">>, <<"request">>))),
```
If the responder attaches to the queue target in the reply-to field,
RabbitMQ will check if the requester link is still attached. If the
requester detached, the link will be refused.
The responder can also attach to the anonymous null target and set the
`to` field to the `reply-to` address.
If RabbitMQ cannot deliver a reply, instead of buffering the reply,
RabbitMQ will be drop the reply and increment the following Prometheus metric:
```
rabbitmq_global_messages_dead_lettered_maxlen_total{queue_type="rabbit_volatile_queue",dead_letter_strategy="disabled"} 0.0
```
That's in line with the MQTT QoS 0 queue type.
A reply message could be dropped for a variety of reasons:
1. The requester ran out of link-credit. It's therefore the requester's
responsibility to grant sufficient link-credit on its receiving link.
2. RabbitMQ isn't allowed to deliver any message to due session flow
control. It's the requster's responsibility to keep the session window
large enough.
3. The requester doesn't consume messages fast enough causing TCP
backpressure being applied or the RabbitMQ AMQP writer proc isn't
scheduled quickly enough. The latter can happen for example if
RabbitMQ runs with a single scheduler (is assigned a single CPU
core). In either case, RabbitMQ internal flow control causes the
volatile queue to drop messages.
Therefore, if high throughput is required while message loss is undesirable, a classic queue should be used
instead of a volatile queue since the former buffers messages while the
latter doesn't.
The main difference between the volatile queue and the MQTT QoS 0 queue
is that the former isn't written to the metadata store.
# Breaking Change
Prior to this PR the following [documented caveat](https://www.rabbitmq.com/docs/4.0/direct-reply-to#limitations) applied:
> If the RPC server publishes with the mandatory flag set then `amq.rabbitmq.reply-to.*`
is treated as **not** a queue; i.e. if the server only publishes to this name then the message
will be considered "not routed"; a `basic.return` will be sent if the mandatory flag was set.
This PR removes this caveat.
This PR introduces the following new behaviour:
> If the RPC server publishes with the mandatory flag set, then `amq.rabbitmq.reply-to.*`
is treated as a queue (assuming this queue name is encoded correctly). However,
whether the requester is still there to consume the reply is not checked at routing time.
In other words, if the RPC server only publishes to this name, then the message will be
considered "routed" and RabbitMQ will therefore not send a `basic.return`.
A list of binaries was incorrectly converted by
`unicode:characters_to_binary` into one big binary. Add a function head
to match this case.
Also, add tests for the values that were not correctly formatted prior
to #14101 and #14381
Speed up Direct Reply-To in AMQP 0.9.1 because prior to this PR sending each RPC reply
was bottlenecked by the slowest network link between the RabbitMQ node the responder
connected to and all other RabbitMQ nodes. This regression was introduced in RabbitMQ 3.12.0
via d65637190a
This is meant to be used as a debugging tool via an eval command. It can
be hard to tell from the outside why a QQ is not snapshotting. Looking
at the `overview/1` is a nice debugging tool. The `smallest_raft_index`
key (and other keys like the `release_cursors`) points out why a
snapshot isn't being taken. The `smallest_raft_index` is the minimum of
three criteria though:
* oldest ready message
* oldest checked out message
* oldest message in the dlx state
This change adds all of those indexes so that it is clear which criteria
is keeping the `smallest_raft_index` down.
The test suites need to be excluded at group level, so the end_per_suite
is always executed and the cluster stopped. Otherwise, clusters
remain running in CI and the following suites find the TCP ports busy.
The new client library version returns reason
`{shutdown, connack_timeout}` in the monitor message.
Delete the monitor since the test case already asserts on the
`{error, connack_timeout}` return value from emqtt:connect/1.
Namely, 'starting'.
Previously, a Prometheus scraping endpoint hit
just at the right moment (when a shovel was
in the 'starting' state) would produce
a function_clause exception.
Luke Bakken
Arnaud Cogoluègnes
dependabot[bot]
Michael Klishin
David Ansari
Loïc Hoguin
Jean-Sébastien Pédron
Michael Davis
Diana Parra Corbacho
D Corbacho
Michal Kuratczyk