Before this change, XhrTransport implementations had to be configured
with the headers to use for HTTP requests other than the initial
handshake.
After this change the handshake headers passed to SockJsClient by
default are used for all other HTTP requests related to the SockJS
connection (e.g. info request, xhr send/receive). A property on
SockJsClient allows restricting the headers to use for other HTTP
requests to a subset of the handshake headers.
Issue: SPR-13254
Before this change <websocket:decorator-factory> decorated to
the SubProtocolWebSocketHandler RootBeanDefinition rather than
using a RuntimeBeanReference, which led to a separate instance
of SubProtocolWebSocketHandler to be created.
Issue: SPR-13190
Recent builds of Jetty 9.3 require that Jetty's own ServletContext
implementation be supplied to WebSocketServerFactory's init() method.
Otherwise, the Jetty server will fail to start with the exception
message: "Not running on Jetty, WebSocket support unavailable".
This commit refactors AbstractWebSocketIntegrationTests,
AbstractSockJsIntegrationTests, and all WebSocketTestServer
implementations in order to support this new requirement.
Specifically:
- WebSocketTestServer defines a new getServletContext() method;
TomcatWebSocketTestServer, UndertowTestServer, and
JettyWebSocketTestServer have all been updated to return the
ServletContext created by the embedded server.
- The setup() methods in AbstractWebSocketIntegrationTests and
AbstractSockJsIntegrationTests have been updated so that the
WebApplicationContext is supplied the appropriate ServletContext,
after deployConfig() has been invoked on the WebSocketTestServer but
before the WebApplicationContext is refreshed.
Issue: SPR-13162
The JettySockJsIntegrationTests are enabled in the performance build
only. Following the upgrade to Jetty 9.3 where the
JettyRequestUpgradeStrategy is now Lifecycle as wel as
ServletContextAware, we need to make sure the ApplicationContext
refresh occurs after the ServletContext has been set. This change
removes the explicit .refresh() call in the test setup and instead
relies on the DispatcherServlet to do that, which ensures that the
ServletContext with which it is initialized by Jetty has been set
on the ApplicationContext before that.
After this change JettyRequestUpgradeStrategy implements Lifecyle,
which is used to init and cleanup the Jetty WebSocketServerFactory.
Since a RequestUpgradeStrategy is typically created reflectively
within DefaultHandshakeHandler, the Lifecycle events are propagated
from the top, i.e. the Spring MVC HandlerMapping through the
WebSocket/SockJsHttpRequestHandler.
Issue: SPR-13140
This change introduces SimpUserRegistry exposing an API to access
information about connected users, their sessions, and subscriptions
with STOMP/WebSocket messaging. Provides are methods to access users
as well as a method to find subscriptions given a Matcher strategy.
The DefaultSimpUserRegistry implementation is also a
SmartApplicationListener which listesn for ApplicationContext events
when users connect, disconnect, subscribe, and unsubscribe to
destinations.
The MultiServerUserRegistry implementation is a composite that
aggregates user information from the local SimpUserRegistry as well
as snapshots of user on remote application servers.
UserRegistryMessageHandler is used with MultiServerUserRegistry. It
broadcats user registry information through the broker and listens
for similar broadcasts from other servers. This must be enabled
explicitly when configuring the STOMP broker relay.
The existing UserSessionRegistry which was primiarly used internally
to resolve a user name to session id's has been deprecated and is no
longer used. If an application configures a custom UserSessionRegistr
still, it will be adapted accordingly to SimpUserRegistry but the
effect is rather limited (comparable to pre-existing functionality)
and will not work in multi-server scenarios.
Issue: SPR-12029
Since SPR-10954, the SimpleBrokerMessageHandler supports `heart-beats`.
Even if the STOMP spec states that the `heart-beat` header is OPTIONAL,
and if absent considered as `heart-beat: 0,0`,
some clients rely on this to be set in CONNECTED frames.
This commit adds this header information even if no task
scheduler/heart-beat have been configured.
See: https://stomp.github.io/stomp-specification-1.2.html#Heart-beating
Issue: SPR-10954
This commit adds CORS related headers to HttpHeaders
and update DefaultCorsProcessor implementation to
use ServerHttpRequest and ServerHttpResponse instead
of HttpServletRequest and HttpServletResponse. Usage
of ServerHttpResponse allows to avoid using Servlet 3.0
specific methods in order keep CORS support Servlet 2.5
compliant.
Issue: SPR-12885
This change adds support for broadcasting messages with unresolved
user destinations so that other servers can try to resolve it.
That enables sending messages to users who may be connected to a
different server.
Issue: SPR-11620
This commit introduces support for CORS in Spring Framework.
Cross-origin resource sharing (CORS) is a mechanism that allows
many resources (e.g. fonts, JavaScript, etc.) on a web page to
be requested from another domain outside the domain from which
the resource originated. It is defined by the CORS W3C
recommandation (http://www.w3.org/TR/cors/).
A new annotation @CrossOrigin allows to enable CORS support
on Controller type or method level. By default all origins
("*") are allowed.
@RestController
public class SampleController {
@CrossOrigin
@RequestMapping("/foo")
public String foo() {
// ...
}
}
Various @CrossOrigin attributes allow to customize the CORS configuration.
@RestController
public class SampleController {
@CrossOrigin(origin = { "http://site1.com", "http://site2.com" },
allowedHeaders = { "header1", "header2" },
exposedHeaders = { "header1", "header2" },
method = RequestMethod.DELETE,
maxAge = 123, allowCredentials = "true")
@RequestMapping(value = "/foo", method = { RequestMethod.GET, RequestMethod.POST} )
public String foo() {
// ...
}
}
A CorsConfigurationSource interface can be implemented by HTTP request
handlers that want to support CORS by providing a CorsConfiguration
that will be detected at AbstractHandlerMapping level. See for
example ResourceHttpRequestHandler that implements this interface.
Global CORS configuration should be supported through ControllerAdvice
(with type level @CrossOrigin annotated class or class implementing
CorsConfigurationSource), or with XML namespace and JavaConfig
configuration, but this is not implemented yet.
Issue: SPR-9278
Prior to this commit, the `client-library-url` XML attribute was not
effective in the MVC namespace, leaving the default value configured:
```xml
<websocket:sockjs client-library-url="/js/sockjs.js" />
```
This commit fixes the sockjs namespace handler and makes sure that this
attribute is configured on the `SockJsService` Bean to be created.
Issue: SPR-12874
The getter in TransportHandlingSockJsService now returns a mutable
List. The immutable wrapper doesn't make sense since it's possible
anyway to modify the list by creating a new list and calling the
setter again. It's also consistent with the same field on
WebSocketHttpRequestHandler.
This is related to work for SPR-12845.
This change adds support for global @MessageExceptionHandler methods
with STOMP over WebSocket messages. Such methods can be added to
@ControllerAdvice annotated components, much like @ExceptionHandler
methods for Spring MVC.
Issue: SPR-12696
WebSocketStompClient can be used with any implementation of
org.springframework.web.socket.client.WebSocketClient, which includes
org.springframework.web.socket.sockjs.client.SockJsClient.
Reactor11TcpStompClient can be used with reactor-net and provides STOMP
over TCP. It's also possible to adapt other WebSocket and TCP client
libraries (see StompClientSupport for more details).
For example usage see WebSocketStompClientIntegrationTests.
Issue: SPR-11588
This commit adds support for a same origin check that compares
Origin header to Host header. It also changes the default setting
from all origins allowed to only same origin allowed.
Issues: SPR-12697, SPR-12685
Before this change the WebSocketTransportHandler passed
Collections.emptyMap as attributes to the HandshakeHandler because
it didn't matter what attributes the underlying WebSocketSession has
since it is wrapped by the SockJsSession and that's what exposed for
use everywhere.
This change has the WebSocketTransportHandler passing the attributes
from the SockJsSession instead since it's more accurate for the
underlying WebSocketSession to have access to the same map instance
and it allows the HandshakeHandler to change the attributes even if
it doesn't need to do that today.
Issue: SPR-12716
Add support for annotation-based event listeners. Enabled automatically
when using Java configuration or can be enabled explicitly via the
regular <context:annotation-driven/> XML element. Detect methods of
managed beans annotated with @EventListener, either directly or through
a meta-annotation.
Annotated methods must define the event type they listen to as a single
parameter argument. Events are automatically filtered out according to
the method signature. When additional runtime filtering is required, one
can specify the `condition` attribute of the annotation that defines a
SpEL expression that should match to actually invoke the method for a
particular event. The root context exposes the actual `event`
(`#root.event`) and method arguments (`#root.args`). Individual method
arguments are also exposed via either the `a` or `p` alias (`#a0` refers
to the first method argument). Finally, methods arguments are exposed via
their names if that information can be discovered.
Events can be either an ApplicationEvent or any arbitrary payload. Such
payload is wrapped automatically in a PayloadApplicationEvent and managed
explicitly internally. As a result, users can now publish and listen
for arbitrary objects.
If an annotated method has a return value, an non null result is actually
published as a new event, something like:
@EventListener
public FooEvent handle(BarEvent event) { ... }
Events can be handled in an aynchronous manner by adding `@Async` to the
event method declaration and enabling such infrastructure. Events can
also be ordered by adding an `@Order` annotation to the event method.
Issue: SPR-11622
This commit introduces the following changes:
- Requests without Origin header are not rejected anymore
- Disable Iframe when allowedOrigins is not empty and not equals to *
- The Iframe is not cached anymore in order to have a reliable origin check
- allowedOrigins must not be null or empty
- allowedOrigins format is now validated (should be * or start by http(s)://)
Issue: SPR-12660
A logical follow-up on commit 43d937, this change also removes (or
rather deprecates for now) writePrelude that is only of concern to
streaming SockJS session implementations.
Issue: SPR-12427
This change removes the need for the isStreaming field from the base
class AbstractHttpSockJsSession. This field was used to account for
differences between polling vs streaming SockJS sessions without having
to expose to sub-classes private fields that are otherwise protected
from concurrent access by the base class. The change manages to delegate
to sub-classes without providing direct access to protected fields.
Issue: SPR-12427
This change designates Jetty SockJS integration tests to run as part of
the "performance", but not the main "publication", CI build due to
recurring low-level failures suspected to be Jetty issues, e.g.
"java.io.IOException: Cannot append to finished buffer" or
"java.io.IOException: Out of order Continuation frame encountered".
The tests will still run at once a day with the performance build but
should not fail the main build with false negatives. Also note that
an Undertow variant of the exact same tests, which hasn't been failing,
will continue to run as part of the main build.
The following two refinements have been added:
1) SockJS doesn't support binary messages so don't even try
2) don't bother if payload.length == 0
Issue: SPR-12475
This commit introduces the SpringHandlerInstantiator
class, a Jackson HandlerInstantiator that allows to autowire
Jackson handlers (JsonSerializer, JsonDeserializer, KeyDeserializer,
TypeResolverBuilder and TypeIdResolver) if needed.
SpringHandlerInstantiator is automatically used with
@EnableWebMvc and <mvc:annotation-driven />.
Issue: SPR-10768
With this commit, Jackson builder is now used in spring-websocket
to create the ObjectMapper instance.
It is not possible to use the builder for spring-messaging
and spring-jms since these modules don't have a dependency on
spring-web, thus they now just customize the same features:
- MapperFeature#DEFAULT_VIEW_INCLUSION is disabled
- DeserializationFeature#FAIL_ON_UNKNOWN_PROPERTIES is disabled
Issue: SPR-12293
Upgrade undertow dependency to 1.1.0.Final.
Add support for undertow 1.1.0.Final in the
UndertowRequestUpgradeStrategy, after a breaking change in the
`io.undertow.websockets.jsr.ConfiguredServerEndpoint` constructor.
Issue: SPR-12302
Prior to this change, duplicate SubProtocolHandlers could be registered
when configuring STOMP with several registrations:
public void registerStompEndpoints
(final StompEndpointRegistry registry) {
this.endpointRegistry.addEndpoint("/stompOverWebSocket");
this.endpointRegistry.addEndpoint("/stompOverSockJS").withSockJS();
}
This commit registers sub-protocols in a Set instead of a list (see
SubProtocolWebSocketHandler), thus fixing the issue.
Issue: SPR-12403
This commit introduces a new OriginHandshakeInterceptor. It filters
Origin header value against a list of allowed origins.
AbstractSockJsService as been modified to:
- Reject CORS requests with forbidden origins
- Disable transport types that does not support CORS when an origin
check is required
- Use the Origin request header value instead of "*" for
Access-Control-Allow-Origin response header value
(mandatory when Access-Control-Allow-Credentials=true)
- Return CORS header only if the request contains an Origin header
It is possible to configure easily this behavior thanks to JavaConfig API
WebSocketHandlerRegistration#addAllowedOrigins(String...) and
StompWebSocketEndpointRegistration#addAllowedOrigins(String...).
It is also possible to configure it using the websocket XML namespace.
Please notice that this commit does not change the default behavior:
cross origin requests are still enabled by default.
Issues: SPR-12226
Before this change the simple broker simply removed subscriptions
upon receiving a DISCONNECT message assuming it was a result of
a client STOMP WebSocket session ending.
However, if the server-side application sends a DISCONNECT to
the broker in order to terminate a session, the STOMP WebSocket
session could remain unware without any further action. This
change ensures the simple broker sends a DISCONNECT_ACK message
downstream whenever it receives a DISCONNECT.
Issue: SPR-12288
This change adds a ChannelInterceptor that flips the immutable flag on
messages being sent. This allows components sending messages to leave
the message mutable for interceptors to further apply modifications
before the message is sent (and exposed to concurrency).
The interceptor is automatically added with the STOMP/WebSocket Java
and XML config and the StompSubProtocolHandler leaves parsed incoming
messages mutable so they can be further modified before being sent.
Issue: SPR-12321
The WebSocketMessageBroker config now allows wrapping the
SubProtocolWebSocketHandler to enable advanced use cases that may
require access to the underlying WebSocketSession.
Issue: SPR-12314
This change adds a new XhrTransport for the SockJs client
implementation. This transport is based on `UndertowClient`,
Undertow's HTTP client.
Note that this transport can be customized with an OptionMap that is
used by the Xnio worker backing the I/O communications (see
http://xnio.jboss.org).
Implementation tested with undertow 1.0.36, 1.1.0.RC3, 1.2.0.Beta1.
Issue: SPR-12008
This change adds a "Vary: Origin" HTTP response header for /info and
/iframe SockJS endpoints.
This is preventing proxies and browsers from caching a response and
reusing it for an invalid Origin.
Reference: https://groups.google.com/forum/#!topic/sockjs/svsLWRorSis
Issue: SPR-12310
This change uses a ChannelInterceptor (inserted at index 0) to detect
when a DISCONNECT message is precluded from being sent on the
clientInboundChannel. This can happen if another interceptor allows
a runtime exception out from preSend or returns false.
It is crucial for such messages to be processed, so when detected
they're processed still.
Issue: SPR-12218
WebSocket clients going away is an expected and common occurance.
Logging at ERROR level on failure to close a connection or on failures
to write data to a WebSocket sessions has a high potential for false
positives with very little to do. This change lowers the log level for
a number of log messages that fit this category.
This should be helped by the effort already spent for 4.1 to ensure
logging at DEBUG level doesn't produce excessive amounts of logging.
Issue: SPR-12155
This change extends the "websocket" scope to ApplicationContext events
published from StompSubProtocolHandler. This however will only work
with ApplicationEventMulticaster that multicasts events in the same
thread.
Issue: SPR-12172
Replace references to the old RFC 2616 (HTTP 1.1) with references
to the new RFCs 7230 to 7235.
This commit also deprecates:
- HttpStatus.USE_PROXY
- HttpStatus.REQUEST_ENTITY_TOO_LARGE in favor of HttpStatus.PAYLOAD_TOO_LARGE
- HttpStatus.REQUEST_URI_TOO_LONG in favor of HttpStatus.URI_TOO_LONG
Issue: SPR-12067
Before this change the SockJsWebSocketHandler precluded determination
of the sub-protocols by wrapping the actual target handler.
After this change SockJsWebSocketHandler implements SubProtocolCapable
and returns the list of sub-protocols from the wrapped handler.
This change creates an AbstractTyrusRequestUpgradeStrategy shared
between the WebLogic and GlassFish sub-classes.
The version of Tyrus is lowered to 1.3.5 to match the version used
in WebLogic (12.1.3) and that in turn requires a little extra effort
in the base AbstractTyrusRequestUpgradeStrategy to make up for
changes that have taken place from Tyrus 1.3.5 to 1.7.
Issue: SPR-11293
This change provides WebSocket support for the upcoming Glassfish 4.0.1
release while at the same dropping support for Glassfish 4.0 due to
incompatible changes.
Issue: SPR-11094
Before this change the DefaultHandshakeHandler by default passed the
list of requested WebSocket extensions as-is relying on the WebSocket
engine to remove those not supported.
This change ensures that WebSocket extensions not supported by the
runtime are proactively removed instead.
This change is preparation for SPR-11094.
This change adds a WebSocketTestServer setup method that initializes
the server and obtains a new port.
In turn AbstractWebSocketIntegrationTests invokes the new method from
its setup method thus ensuring a new port is used on every test.
In order to be able to use separators like "." (used by default
by most broker relays) instead of "/" for destination patterns
handling, the PathMatcher used in spring-messaging can now
be customized easily thanks to XML websocket namespace
or JavaConfig.
AntPathMatcher has been updated in order to use the configured path
separator instead of an hardcoded "/" for path concatenation.
Extension handling is now disabled when the "." separator is configured.
Issue: SPR-11660
Before this change WebSocketConnectionManager delegated SmartLifecycle
methods to the client instance it contained. After this change
WebSocketClient implementations are expected to implement Lifecycle
(rather than SmartLifecycle).
The need for this is even more evident with SockJsClient, which is a
WebSocketClient implementation and contains a WebSocketTransport that
in turn contains the actual WebSocketClient. In this case
WebSocketConnectionManager as the top level container is the obvious
place to configure autostartup while Lifecycle events can be
propagated all the way down to the root WebSocketClient.
This change removes most logging at INFO level and also ensures the
amount of information logged at DEBUG level is useful, brief, and
not duplicated.
Also added is custom logging for STOMP frames to ensure very readable
and consise output.
Issue: SPR-11934
This change adds collection of stats in key infrastructure components
of the WebSocket message broker config setup and exposes the gathered
information for logging and viewing (e.g. via JMX).
WebSocketMessageBrokerStats is a single class that assembles all
gathered information and by default logs it once every 15 minutes.
Application can also easily expose to JMX through an MBeanExporter.
A new section in the reference documentation provides a summary of
the available information.
Issue: SPR-11739
Prior to this change, AbstractHttpReceivingTransportHandler had a direct
dependency on a Jacckson Exception (checking that exception in a catch
clause). This can cause issues for applications that don't have that
dependency.
This commit removes that direct dependency, still logging the
appropriate log messages using a parent exception (IOException) and
reflection.
Issue: SPR-11963
Although unlikely in practice (but not impossible), the SockJS
integration tests write a message while the request is initializing.
This change adds synchronization around request intiailization
for the SockJS HTTP sesion.
Issue: SPR-11916
This change removes the recently added SockJsThreadPoolTaskScheduler
and instead builds support for the removeOnCancelPolicy property in
ThreadPoolTaskScheduler and ScheduledExecutorFactoryBean.
Issue: SPR-11918
When a WebSocket session is closed after not having received any
messages, we'll use SESSION_NOT_RELIABLE to indicate to other parts
of the session closing code not to send anything further (e.g.
SockJS "Go Away!" frame).
Issue: SPR-11884
This change ensures the state of a SockJS session is set to CLOSED
immediately after close is invoked. This avoids duplicate invocations
of afterConnectionClosed in WebSocket transport.
Issue: SPR-11884
Update WebSocketSession toString methods to include the handshake URI
and add id and URI fields to ensure they're available after close().
Log WebSocket session open and close events at INFO.
Remove trace messages for destinations that do not match.
Issue: SPR-11884
Optimize logging with tracking the opening and closing of WebSocket
sessions and STOMP broker connections in mind.
While the volume of messages makes it impractical to log every message
at anything higher than TRACE, the opening and closing of connections
is more manageable and can be logged at INFO. This makes it possible to
drop to INFO in production and get useful information without getting
too much in a short period of time.
The logging is also optimized to avoid providing the same information
from multiple places since messages pass through multiple layers.
Issue: SPR-11884
Prior to this commit, the ServletResponseHttpHeaders.get method
would throw an NPE when used under Wildfly 8.0.0.Final and 8.1.0.Final.
This can be traced to WFLY-3474, which throws an NPE when calling
HttpServletResponse.getHeaders("foo") and that header has not
been defined prior to that.
This would cause NPE being thrown by AbstractSockJsService when
checking for CORS HTTP headers in the server HTTP response.
This commit surrounds that method call in AbstractSockJsService and
guards against this issue.
Issue: SPR-11919
In a recent CI build failure a test timed out waiting for a message:
https://build.spring.io/browse/SPR-PUB-1316
In fact there was a WebSocket transport failure originating in Jetty's
WebSocket Parser. However this failure is only apparent by looking at
the logs. This change adds a check if a transport error ocurred while
we were waiting and throws an AssertionError.
Sessions connected to a STOMP endpoint are expected to receive some
client messages. Having received none after successfully connecting
could be an indication of proxy or network issue. This change adds
periodic checks to see if we have not received any messages on a
session which is an indication the session isn't going anywhere
most likely due to a proxy issue (or unreliable network) and close
those sessions.
Issue: SPR-11884
Commit 5d2e6f enabled the setRemoveOnCancelPolicy of the SockJS
ScheduledThreadPoolExecutor by default. However that property is only
available in JDK 1.7 or later. This change fixes the issue and
introduces an extension of ThreadPoolTaskScheduler for for use with
SockJS which is necessary in any case since ThreadPoolTaskScheduler
does not expose the underlying ScheduledThreadPoolExecutor otherwise.
Issue: SPR-11918
This change sets the removeOnCancelPolicy on the SockJS
ScheduledThreadPoolExecutor to true. This ensures that cancelled
tasks are removed immediately to avoid the "unbounded retention
of cancelled tasks" that is mentioned in the Javadoc of
ScheduledThreadPoolExecutor:
"By default, such a cancelled task is not automatically removed from
the work queue until its delay elapses. While this enables further
inspection and monitoring, it may also cause unbounded retention of
cancelled tasks. To avoid this, set setRemoveOnCancelPolicy to true,
which causes tasks to be immediately removed from the work queue at
time of cancellation."
Issue: SPR-11918
This change ensures the server "WebSocketHandler" is notified of the
opening of a session before writing the open frame to the remote
handler. Any messages sent by the server "WebSocketHandler" while
getting notified of the opening get cached and flushed after the open
frame has been written.
This change introduces locking in AbtractHttpSockJsSession to guard
access to the HTTP response. The goal is to prevent contention between
client requests to receive messages (i.e. long polling) and
the application trying to write.
Issue: SPR-11916
This change adds a new implementation of WebSocketClient that can
connect to a SockJS server using one of the SockJS transports
"websocket", "xhr_streaming", or "xhr". From a client perspective
there is no implementation difference between "xhr_streaming" and
"xhr". Just keep receiving and when the response is complete,
start over. Other SockJS transports are browser specific
and therefore not relevant in Java ("eventsource", "htmlfile" or
iframe based variations).
The client loosely mimics the behavior of the JavaScript SockJS client.
First it sends an info request to find the server capabilities,
then it tries to connect with each configured transport, falling
back, or forcing a timeout and then falling back, until one of the
configured transports succeeds.
The WebSocketTransport can be configured with any Spring Framework
WebSocketClient implementation (currently JSR-356 or Jetty 9).
The XhrTransport currently has a RestTemplate-based and a Jetty
HttpClient-based implementations. To use those to simulate a large
number of users be sure to configure Jetty's HttpClient executor
and maxConnectionsPerDestination to high numbers. The same is true
for whichever underlying HTTP library is used with the RestTemplate
(e.g. maxConnPerRoute and maxConnTotal in Apache HttpComponents).
Issue: SPR-10797
This change adds support for a custom "websocket" scope.
WebSocket-scoped beans may be injected into controllers with message
handling methods as well as channel interceptor registered on the
"inboundClientChannel".
Issue: SPR-11305
Before this change, subscribing to a user destination and use of
@SendToUser annotation required an authenticated user.
This change makes it possible to subscribe to a user destination from
WebSocket sessions without an authenticated user. In such cases the
destination is associated with one session only rather than with a
user (and all their sessions).
It is then also possible to send a message to a user destination
via "/user/{sessionId}/.." rather than "/user/{user}/...".
That means @SendToUser works relying on the session id of the input
message, effectively sending a reply to destination private to the
session.
A key use case for this is handling an exception with an
@MessageExceptionHandler method and sending a reply with @SendToUser.
Issue: SPR-11309
Animal sniffer provides tools to assist verifying that classes
compiled with a newer JDK are compatible with an older JDK.
This integratesthe latest version of the tool (1.11) that
permits the use of custom annotations. Added @UsesJava7,
@UsesJava8 and @UsesSunHttpServer and annotated the few places
where we rely on a specific environment.
The verification process can be invoked by running the 'sniff'
task.
Issue: SPR-11604
polishing
The original fix for SPR-11423:
32e5f57e64
was insufficient when using an external broker since the original
destination header has to be in the "native headers" map (i.e. with
STOMP headers) in order to be included in messages broadcast by
the broker.
The BufferingStompDecoder now decorates rather than extend
StompDecoder. This allows a single StompDecoder instance to be
configured and extended independantly while buffering remains a
separate concern.
Mutate rather than re-create headers when decoding STOMP messages
before a message is sent on a message channel.
Use MessageBuilder.createMessage to ensure the fully prepared
MessageHeaders is used directly MessageHeaderAccessor instance.
Issue: SPR-11468
Refine semantics of ID and TIMESTAMP headers provided to protected
MessageHeaders constructor.
Refactor internal implementation of MessageHeaderAccessor.
Support mutating headers from a single thread while a message is being
built (e.g. StompDecoder creating message + then adding session id).
Improve immutablity in NativeMessageHeaderAccessor and in
StompHeaderAccessor.
Optimize object creation for initializing messages and subsequent
accessing their headers.
Introduce MessageHeaderAccessorFactory support to enable applying a
common strategies for ID and TIMESTAMP generation to every message.
Add MessageBuilder shortcut factory method for creating messages from
payload and a full-prepared MessageHeaders instance. Also add
equivalent constructors to GenericMessage and ErrorMessage.
Issue: SPR-11468
The UserDestinationMessageHandler adds a header providing a hint for
what the original destination a user may have used when subscribing.
That is then used when writing messages back to WebSocket clients to
ensure they dont see the internally used, transformed user destination.
This change moves the header name constatn to make it more broadly
applicable. For example SPR-11645.
Prior to this commit, @SubscribeMapping mapped methods (backed with
@SendTo* annotations, or not) would send MESSAGEs with the wrong
destination. Instead of using the original SUBSCRIBE destination, it
would use the lookup path computed from the configured prefixes in the
application.
This commit fixes this issue - now @SubscribeMapping MESSAGEs use the
original SUBSCRIBE destination.
Issue: SPR-11648
Update some native WebSocket session getters to return basic
information after it is closed. It is required for example in
SubProtocolWebSocketHandler#afterConnectionEstablished() or
StompSubProtocolHandler#afterSessionStarted().
Issue: SPR-11621
Proactively notify all active WebSocket sessions when a shutdown is
progress. Sessions then can ignore further attempts to send messages
and also stop stop trying to flush messages right away.
BufferingStompDecoder message buffer size limit can now be configured
with JavaConfig MessageBrokerRegistry.setMessageBufferSizeLimit() or
with XML <websocket:message-brocker message-buffer-size="">.
Issue: SPR-11527
Before this change the StompDecoder decoded and returned only the first
Message in the ByteBuffer passed to it. So to obtain all messages from
the buffer, one had to loop passing the same buffer in until no more
complete STOMP frames could be decoded.
This chage modifies StompDecoder to return List<Message> after
exhaustively decoding all available STOMP frames from the input buffer.
Also an overloaded decode method allows passing in Map that will be
populated with any headers successfully parsed, which is useful for
"peeking" at the "content-length" header.
This change also adds a BufferingStompDecoder sub-class which buffers
any content left in the input buffer after parsing one or more STOMP
frames. This sub-class can also deal with fragmented messages,
re-assembling them and parsing as a whole message.
Issue: SPR-11527
When a send timeout is detected, the WebSocket session is now closed
with a custom close status that indicates so. This allows skipping
parts of the close logic that may cause further hanging.
Issue: SPR-11450
Before this change SockJsSession implementations of WebSocketSession
used synchronization around its method implementations protecting
internal state and ensuring only a single thread is sending messages
at a time.
A WebSocketSession is generally expected to be used from one thread
at a time and now that application messages are sent through
ConcurrentWebSocketSessionDecorator, there is no concern about
application messages sent from the different threads.
While there are some remaining concerns, those can be addressed
without using the synchronized keyword. This change removes it from
the methods of all SockJS session implementations.
Issue: SPR-11450
Before this change the decorator ensured that for a specific WebSocket
session only one thread at a time can send a message. Other threads
attempting to send would have their messages buffered and each time
that occurs, a check is also made to see if the buffer limit has been
reached or the send time limit has been exceeded and if so the session
is closed.
This change adds further protection to ensure only one thread at a time
can perform the session limit checks and attempt to close the session.
Furthermore if the session has timed out and become unresponsive,
attempts to close it may block yet another thread. Taking this into
consideration this change also ensures that state associated with the
session is cleaned first before an attempt is made to close the session.
Issue: SPR-11450
Since we now wrap the WebSocketSession with a concurrent decorator, the
synchronized keyword around message sending needed to be removed.
Issue: SPR-11586
Prior to this commit, configuring a custom handshakeHandler when setting
up a stomp-endpoint with SockJS would not be taken into account:
<websocket:stomp-endpoint path="/foo">
<websocket:handshake-handler ref="customHandler"/>
<websocket:sockjs/>
</websocket:stomp-endpoint>
This commit fixes this by creating and registering a
WebsocketTransportHandler (with this handshakeHandler) as a
transportHandler override for the SockJSService.
Issue: SPR-11568
Prior to this commit, the codebase was using a mix of log4j.xml
and log4j.properties for test-related logging configuration. This
can be an issue as log4j takes the xml variant first when looking
for a default bootstrap configuration.
In practice, some modules declaring the properties variant were
taking the xml variant configuration from another module.
The general structure of the configuration has also been
harmonized to provide a standard console output as well as an
easy way to enable trace logs for the current module.
The clientInboundChannel and clientOutboundChannel now use twice
the number of available processors by default to accomodate for some
degree of blocking in task execution on average.
In practice these settings still need to be configured explicitly in
applications but these should serve as better default values than
the default values in ThreadPoolTaskExecutor.
Issue: SPR-11450
This change exposes the WebSocketSession attributes through a message header.
The StompSubProtocolHandler adds this to incoming messages.
For now messaging handling methods can access the map via @Header, e.g.:
@Header(StompHeaderAccessor.SESSION_ATTRIBUTES) Map<String, Object> attrs) {
Issue: SPR-11566
Add accessor for brokerAvailable in AbstractBrokerMessageHandler
Ensure brokerAvailable is set even if eventPublisher is not
Add tests BrokerMessageHandlerTests
Turn off brokerAvailable when StompBrokerRelayMessageHandler stops
Actually stop message handling when brokerAvailable=false
Improve log messages
Issue: SPR-11563
Prior to this commit, the `relay-port` attribute of the
`<websocket:stomp-broker-relay />` tag was of type `xsd:int`.
This prevents developers from using `PropertyPlaceholderConfigurer`,
even though this configuration key is a good candidate for such use
(this value depends on prod/staging/etc environment).
This commit changes that type to `xsd:string`.
Issue: SPR-11537
After this change, AbstractSockJsService does not add CORS headers if
the response already contains an "Access-Control-Allow-Origin" header.
Essentially it backs off assuming CORS headers are handled centrally
e.g. through a Filter.
In order to support this, the ServletServerHttpResponse now returns an
instance of HttpHeaders that also provides access to headers already
present in the HttpServletResponse.
Issue: SPR-11443
- Deleted empty AbstractWebSocketClientTests class.
- AbstractServletHandlerMethodTests and AbstractHttpRequestTests are
now actually declared as abstract.
- The following classes are not abstract but currently have an
"Abstract" prefix and therefore get ignored by the Gradle build.
This commit renames each of these by deleting the "Abstract" prefix.
- AbstractFlashMapManagerTests
- AbstractMappingContentNegotiationStrategyTests
- AbstractSockJsServiceTests
- AbstractWebSocketHandlerRegistrationTests
The Servlet API does not provide notifications when a client
disconnects, see see https://java.net/jira/browse/SERVLET_SPEC-44.
Therefore network IO failures may occur simply because a client has
gone away. Before this change that could fill logs with unnecessary
stack traces.
After this change we make a best effort to identify such network
failures, on a per-server basis (tested with Jetty, Tomcat, Glassfish,
and WildFly), and log them under a separate log category.
A simple one-line message is logged at DEBUG level (i.e. no stack trace)
while a full stack trace is shown at TRACE level.
Issue: SPR-11438
Before this change CompositeMessageConverter had a ContentTypeResolver
field that was in turn set on all contained converters.
After this change that field is removed and effectively
CompositeMessageConverter is a simple container of other converters.
Each converter in turn must have been configured with a
ContentTypeResolver.
Doing so means it is less likely to have unexpected consequences when
configuring converters, the ContentTypeResolver set in the composite
converter overriding the one configured in a contained converter.
Also commit 676ce6 added default ContentTypeResolver initialization
to AbstractMessageConverter, which ensures that converters are still
straight forward to configure.
Issue: SPR-11462
Before this change, when a client subscribed to a "user" destination
(e.g. /user/foo), actual messages received in response to that
subscription contained the server-translated, unique user destination
(e.g. /foo-user123).
This is not an issue for clients such as stomp.js since the
subscription is unique and sufficient to match subscription responses.
However, other STOMP clients do additional checks on the destination
of the subscription and the response.
This change ensures that messages sent to clients on user destionations
always contain a destination that matches the one on the original
subscription.
Issue: SPR-11423
The interface is to be implemented in addition to
java.security.Principal when Principal.getName() is not globally unique
enough for use in user destinations.
Issue: SPR-11327
sockjs-client expects a prelude to be written on every request with
streaming transports. The protocol tests don't make this clear and
don't expose this issue.
The test case for SPR-11183 (writing 20K messages in succession) did
expose the issue and this commit addresses it.
Issue: SPR-11183
This change adds a protected method to DefaultHandshakeHandler to
determine the user for the WebSocket session. By default it's
implemeted to obtain it from the request.
Issue: SPR-11228
The Jetty ServletWebUpgradeRequest implements getUserPrincipal to
return the Principal from the HttpServletRequest on the upgrade.
This change ensures we can fall back on that.
However the JettyRequestUpgradeStrategy still passes the user from
HttpServletRequest from the upgrade, in order to work with Jetty
9.0.x and avoid running into this 9.1.x issue:
https://bugs.eclipse.org/bugs/show_bug.cgi?id=423118
The observed behavior was that the client does not get a response from
the WebSocket HTTP handshake. On the server the handshake actually
succeeds, the response is set correctly to status 101, and the
WebSocketHandler gets notified of the successfully established
connection.
This change flushes the ServletResponse just before returning from the
GlassfishRequestUpgradeStrategy. This is actually what Glassfish's own
TyrusServletFilter does as well at the end along with a comment that it
is a possible bug.
This commit adds an XML namespace equivalent of @EnableWebSocket and
@EnableWebSocketMessageBroker. Those are <websocket:handlers> and
<websocket:message-broker> respectively.
Examples can be found in the test suite.
This commit also alters the way MessageHandler's subscribe to their
respective MessageChannel's of interest. Rather than performing the
subscriptions in configuration code, the message channels are now
passed into MessageHandler's so they can subscribe themselves on
startup.
Issue: SPR-11063
Apply consistent styling to new classes introduced in Spring 4.0.
- Javadoc line wrapping, whitespace and formatting
- General code whitespace
- Consistent Assert.notNull messages
@EnableWebSocketMessageBroker message channel configuration can now be
customized via WebSocketMessageBrokerConfigurer. It is necessary to
make this easy and even required as part of the basic configuration
since by default the message channels are backed by a thread pool of
size 1, not suitable for production use.
Issue: SPR-11023
Two concurrent threads should not send a message on a single WebSocket
session at the same time, for example see:
http://docs.oracle.com/javaee/7/api/javax/websocket/RemoteEndpoint.Basic.html
In StompSubProtocolHandler it is quite possible that multiple messages
may be broadcast to a single WebSocket client concurrently.
This change adds synchronization around the sending of a message to a
specific cilent session.
Issue: SPR-11023
Fix a variety of typos throughout the project, primarily in
comments (javadoc or otherwise) but also in a handful of log messages
and a couple exception messages.
ISSUE: SPR-11123
The addition of SubProtocolCapable simplifies configuration since it is
no longer necessary to explicitly configure DefaultHandshakeHandler
with a list of supported sub-protocols. We will not also check if the
WebSocketHandler to use for the WebSocket request is an instance of
SubProtocolCapable and obtain the list of sub-protocols that way. The
provided SubProtocolWebSocketHandler does implement this interface.
Issue: SPR-11111
Fix remaining Java compiler warnings, mainly around missing
generics or deprecated code.
Also add the `-Werror` compiler option to ensure that any future
warnings will fail the build.
Issue: SPR-11064
Before this change spring-messaging contained a few WebSocket-related
classes including WebSocket sub-protocol support for STOMP as well
as @EnableWebSocketMessageBroker and related configuration classes.
After this change those classes are located in the spring-websocket
module under org.springframework.web.socket.messaging.
This means the following classes in application configuration must
have their packages updated:
org.springframework.web.socket.messaging.config.EnableWebSocketMessageBroker
org.springframework.web.socket.messaging.config.StompEndpointRegistry
org.springframework.web.socket.messaging.config.WebSocketMessageBrokerConfigurer
MessageBrokerConfigurer has been renamed to MessageBrokerRegistry and
is also located in the above package.
Before this change the amount of logging was too little or too much
with TRACE turned on. This change separates useful debugging
information and logs it under DEBUG and leaves more detailed
information to be logged under TRACE.
Before this change subscribing to a user-specific destination in STOMP
required manually appending a unique queue suffix provided in a header
with the CONNECTED frame.
This change removes the need to do that. Instead STOMP clients can
subscribe to "/user/queue/error" and can then begin to receive messages
sent to "/user/{username}/queue/error" without colliding with any other
user doing the same.
Issue: SPR-11077
This changes switches from using Jetty's WebSocketListener interface
to use Jetty's @WebSocket annotations instead. The change should be
transparent but the annnotations provide a little more controler
including handling pong frames.
This change also introduces a WebSocketMessage interface.
Issue: SPR-10877
- add WebSocketHttpHeaders
- client-side support for WebSocket extensions
- DefaultHandshakeHandler updates
- replace use of ServletAttributes in JettyRequestUpgradeStratey
- upgrade spring-web to jetty 9.0.5
This commits adds simple, overridable WebSocket Extension
filtering during the handshake phase and adds that
information in the WebSocket session.
The actual WebSocket Extension negotiation happens
within the server implementation (Glassfish, Jetty, Tomcat...),
so one can only remove requested extensions from
the list provided by the WebSocket client.
See RFC6455 Section 9.
Issue: SPR-10843
Commit 2397b21096 changed websocket
support to use GlassFish 4.0.1 nightlies, but broke support for 4.0. In
GlassFish 4.0.1, the package that TyrusEndpoint is located in changed.
This commit provides an abstract handler that does all required
GlassFish setup, but delegates to version specific upgrade handlers to
create the final TyrusEndpoint.
GlassFish 4.0 handler uses reflection to create its endpoint to prevent
dependency issues of depending on different versions of
tyrus-websocket-core and tyrus-container-servlet
After this change, annotated message handling methods configured to use
a destination prefix (e.g. "/app") no longer have to include the prefix
in their mapping. For example if a client sends a message to "/app/foo"
the annotated methods should be mapped with @MessageMapping("/foo").
Ensure configuration provided for WebSocketHandler's (eg interceptors,
or HandshakeHandler) are passed on to the SockJsService if congiured.
Better separate Servlet-specific parts of the configuration to make it
more obvious where non-Servlet alternatives could fit in.
Add more tests.
Improve WebSocket integration tests.
While RC2 is not yet out, we need to support RC1 as well.
This change introduces temporary code that can be removed
once RC2 becomes available to avoid having to use Tomcat
snapshots.
Sam Brannen
Rossen Stoyanchev
Juergen Hoeller
Sebastien Deleuze
Stephane Nicoll
Brian Clozel
Ralph Schaer
Juergen Hoeller
Rossen Stoyanchev
Phillip Webb
Sebastien Deleuze
Brian Clozel
Artem Bilan
Stephane Nicoll
Philippe Marschall
Phillip Webb
Eric Dahl
Michael Irwin
Jan Machacek