Accidental "fat finger" virtual deletion accidents
would be easier to avoid if there was a protection mechanism
that would apply equally even to CLI tools and external
applications that do not use confirmations for deletion
operations.
This introduce the following changes:
* Virtual host metadata now supports a new queue,
'protected_from_deletion', which, when set,
will be considered by key virtual host deletion function(s)
* DELETE /api/vhosts/{name} was adapted to handle
such blocked deletion attempts to respond with
a 412 Precondition Failed status
* 'rabbitmqctl list_vhosts' and 'rabbitmqctl delete_vhost'
were adapted accordingly
* DELETE /api/vhosts/{name}/deletion/protection
is a new endpoint that can be used to remove
the protective seal (the metadata key)
* POST /api/vhosts/{name}/deletion/protection
marks the virtual host as protected
In the case of the HTTP API, all operations on
virtual host metadata require administrative
privileges from the target user.
Other considerations:
* When a virtual host does not exist, the behavior
remains the same: the original, protection-unaware
code path is used to preserve backwards compatibility
References #12772.
The following scenario led to a channel crash:
1. Publish to a non-existing stream: `perf-test -y 0 -p -e amq.default -t direct -k stream`
2. Declare the stream: `rabbitmqadmin declare queue name=stream queue_type=stream`
There is no pid yet, so we got a function_clause with `none`
```
{function_clause,
[{osiris_writer,write,
[none,<0.877.0>,<<"<0.877.0>_-65ZKFz18ll5lau0phi7CsQ">>,1,
[[0,"Sp",[192,6,5,"B@@AC"]],
[0,"Sr",
[193,38,4,
[[[163,10,<<"x-exchange">>],[161,0,<<>>]],
[[163,13,<<"x-routing-key">>],[161,6,<<"stream">>]]]]],
[0,"Su",[160,12,[<<0,19,252,1,0,0,98,171,20,16,108,167>>]]]]],
[{file,"src/osiris_writer.erl"},{line,158}]},
{rabbit_stream_queue,deliver0,4,
[{file,"rabbit_stream_queue.erl"},{line,540}]},
{rabbit_stream_queue,'-deliver/3-fun-0-',4,
[{file,"rabbit_stream_queue.erl"},{line,526}]},
{lists,foldl,3,[{file,"lists.erl"},{line,2146}]},
{rabbit_queue_type,'-deliver0/4-fun-5-',5,
[{file,"rabbit_queue_type.erl"},{line,707}]},
{maps,fold_1,4,[{file,"maps.erl"},{line,860}]},
{rabbit_queue_type,deliver0,4,
[{file,"rabbit_queue_type.erl"},{line,704}]},
{rabbit_queue_type,deliver,4,
[{file,"rabbit_queue_type.erl"},{line,662}]}]}
```
Co-authored-by: Karl Nilsson <kjnilsson@gmail.com>
build(deps): bump org.springframework.boot:spring-boot-starter-parent from 3.4.0 to 3.4.1 in /deps/rabbitmq_auth_backend_http/examples/rabbitmq_auth_backend_spring_boot_kotlin
build(deps): bump org.springframework.boot:spring-boot-starter-parent from 3.4.0 to 3.4.1 in /deps/rabbitmq_auth_backend_http/examples/rabbitmq_auth_backend_spring_boot
[Why]
It was possible that testcases were executed before the etcd daemon was
ready, leading to test failures.
[How]
There was already a santy check to verify that the etcd daemon was
working correctly, but it was itself a testcase.
This patch moves this code to the etcd start code to wait for it to be
ready.
This replaces the previous workaround of waiting for 2 seconds.
While here, log anything printed to stdout/stderr by etcd after it
exited.
Fixes#12981.
Running
```
make -C deps/rabbitmq_peer_discovery_etcd ct-system
```
on some macOS system causes test failures because the client cannot
connect to etcd:
```
test failed to connect [localhost:2379] by <Gun Down> {down,
{shutdown,
econnrefused}}
```
The etcd log file didn't show any error message.
However, the etcd log file showed that the etcd listener got started
after the test case tried to connect.
This commit fixes the test failure.
A better solution would be to use the HTTP API or the etcdctl CLI to
poll the listener status. However, simply waiting for 2 seconds is good
enough for this test suite.
[Why]
Up-to RabbitMQ 3.13.x, there was a case where if:
1. you enabled a plugin
2. you enabled its feature flags
3. you disabled the plugin
4. you restarted a node (or upgraded it)
... the node could crash on startup because it had a feature flag marked
as enabled that it didn't know about:
error:{badmatch,#{feature_flags => ...
rabbit_ff_controller:-check_one_way_compatibility/2-fun-0-/3, line 514
lists:all_1/2, line 1520
rabbit_ff_controller:are_compatible/2, line 496
rabbit_ff_controller:check_node_compatibility_task1/4, line 437
rabbit_db_cluster:check_compatibility/1, line 376
This was "fixed" by the new way of keeping the registry in memory
(#10988) because it introduces a slight change of behavior. Indeed, the
old way walked through the `FeatureFlags` map and looked up the state in
the `FeatureStates` map to create the `is_enabled/1` function. The new
way just looks up the state in `FeatureStates`.
[How]
The new testcase succeeds on 4.0.x and `main`, but would fail on 3.13.x
with the aforementionne crash.
## Why?
To introduce AMQP over WebSocket, we will add gun to the Erlang AMQP
1.0 client. We want to add the latest version of gun for this new
feature. Since rabbitmq_peer_discovery_etcd depends on the outdated
eetcd 0.3.6 which in turn depends on the outdated gun 1.3.3, this commit
first upgrades eetcd and gun.
## How?
See https://github.com/zhongwencool/eetcd?tab=readme-ov-file#migration-from-eetcd-03x-to-04x
## Breaking Changes
This commit causes the following breaking change:
`rabbitmq.conf` settings
* `cluster_formation.etcd.ssl_options.fail_if_no_peer_cert`
* `cluster_formation.etcd.ssl_options.dh`
* `cluster_formation.etcd.ssl_options.dhfile`
are unsupported because they are not valid `ssl:tls_client_option()`.
See https://github.com/erlang/otp/issues/7497#issuecomment-1636012198
[Why]
The feature flag controller that is responsible for enabling a feature
flag may be on a node that doesn't know this feature flag. This is
supported by there is a bug when it queries the callback definition for
that feature flag: it uses its own registry which does not have anything
about this feature flag.
This leads to a crash because the `run_callback/5` funtion tries to use
the `undefined` atom returned by the registry as a map:
crasher:
initial call: rabbit_ff_controller:init/1
pid: <0.374.0>
registered_name: rabbit_ff_controller
exception error: bad map: undefined
in function rabbit_ff_controller:run_callback/5
in call from rabbit_ff_controller:do_enable/3 (rabbit_ff_controller.erl, line 1244)
in call from rabbit_ff_controller:update_feature_state_and_enable/2 (rabbit_ff_controller.erl, line 1180)
in call from rabbit_ff_controller:enable_with_registry_locked/2 (rabbit_ff_controller.erl, line 1050)
in call from rabbit_ff_controller:enable_many_locked/2 (rabbit_ff_controller.erl, line 991)
in call from rabbit_ff_controller:enable_many/2 (rabbit_ff_controller.erl, line 979)
in call from rabbit_ff_controller:updating_feature_flag_states/3 (rabbit_ff_controller.erl, line 307)
in call from gen_statem:loop_state_callback/11 (gen_statem.erl, line 3735)
[How]
The callback definition is now queried from the first node in the list
given as argument. For the common use case where all nodes know about a
feature flag, the first node is the local one, so there should be no
latency caused by the RPC.
See #12963.
[Why]
Once `khepr_db` is enabled by default, we need another way to disable it
to select Mnesia instead.
[How]
We use the new relative forced feature flags mechanism to indicate if we
want to explicitly enable or disable `khepri_db`. This way, we don't
touch other stable feature flags and only mess with Khepri.
However, this mechanism is not supported by RabbitMQ 4.0.x and older.
They will ignore the setting. Therefore, to make this work in
mixed-version testing, we set the `$RABBITMQ_FEATURE_FLAGS` variable for
the secondary umbrella. This part will go away once we test against
RabbitMQ 4.1.x as the secondary umbrella in the future.
At the end, we compare the effective metadata store to the expected one.
If they don't match, we skip the test.
While here, change `rjms_topic_selector_SUITE` to only choose Khepri
without specifying any feature flags.
Transient (i.e. `durable=false`) exchanges and queues are deprecated.
Khepri will store all entities durably.
(Even exclusive queues will be stored durably. Exclusive queues are
still deleted when the declaring connection is closed.)
Similar to how the RabbitMQ AMQP 1.0 Java client already disallows the
creation of transient exchanges and queues, this commit will prohibit
the declaration of transient exchanges and queues in the RabbitMQ
AMQP 1.0 Erlang client starting with RabbitMQ 4.1.
If handle_tick is called before the machine has finished the upgrade
process, it could receive an old overview format (stats tuple vs map).
Let's ignore it and the next handle tick should be fine.
Unlikely to happen in production, detected on CI with a very low tick timeout
Fixes#12933
The assumption that `x-last-death-*` annotations must have been set
whenever the `deaths` annotation is set was wrong.
Reproducation steps, Option 1:
1. In v3.13.7, dead letter a message from Q1 to Q2 (both can be classic queues).
2. Re-publish the message including its x-death header from Q2 back to Q1.
(RabbitMQ 3.13.7 will interpret this x-death header and set the deaths annotation.)
3. Upgrade to v4.0.4
4. Dead letter the message from Q1 to Q2 will cause the following crash:
```
crasher:
initial call: rabbit_amqqueue_process:init/1
pid: <0.577.0>
registered_name: []
exception exit: {{badkey,<<"x-last-death-exchange">>},
[{mc,record_death,4,[{file,"mc.erl"},{line,410}]},
{rabbit_dead_letter,publish,5,
[{file,"rabbit_dead_letter.erl"},{line,38}]},
{rabbit_amqqueue_process,'-dead_letter_msgs/4-fun-0-',
7,
[{file,"rabbit_amqqueue_process.erl"},{line,1060}]},
{rabbit_variable_queue,'-ackfold/4-fun-0-',3,
[{file,"rabbit_variable_queue.erl"},{line,655}]},
{lists,foldl,3,[{file,"lists.erl"},{line,2146}]},
{rabbit_variable_queue,ackfold,4,
[{file,"rabbit_variable_queue.erl"},{line,652}]},
{rabbit_priority_queue,ackfold,4,
[{file,"rabbit_priority_queue.erl"},{line,309}]},
{rabbit_amqqueue_process,
'-dead_letter_rejected_msgs/3-fun-0-',5,
[{file,"rabbit_amqqueue_process.erl"},
{line,1038}]}]}
```
Reproduction steps, Option 2:
1. Run a 4.0.4 / 3.13.7 mixed version cluster where both queues Q1 and Q2
are hosted on the 4.0.4 node.
2. Send a message to Q1 which dead letters to Q2.
3. Re-publish a message with the x-death AMQP 0.9.1 header from Q2 to
Q1. However, this time make sure to publish to the 3.13.7 node which
forwards this message to Q1 on the 4.0.4 node.
4. Subsequently dead lettering this message from Q1 to Q2 (happening on
the 4.0.4 node) will also cause the crash.
The modified test case in this commit was able to repro this crash via
Option 2 in the mixed version cluster tests on the `v4.0.x` branch.
As the de-duplication plugin is the only adopter of the `is_duplicate`
callback, we now use a simpler signature.
When a message is deemed duplicated, we discard it and re-route it to
dead letter exchange.
Signed-off-by: Matteo Cafasso <noxdafox@gmail.com>
(cherry picked from commit f93baa35cb)
`is_duplicate` callback signature was changed in order to support both
the mirroring queues as well as the de-duplication ones.
As the mirroring queues are now deprecated and removed, we can fall
back to a simpler boolean as return value.
Signed-off-by: Matteo Cafasso <noxdafox@gmail.com>
(cherry picked from commit c927446e17)
Prior to this commit, when the sending client overshot RabbitMQ's incoming-window
(which is allowed in the event of a cluster wide memory or disk alarm),
and RabbitMQ sent a FLOW frame to the client, RabbitMQ sent a negative
incoming-window field in the FLOW frame causing the following crash in
the writer proc:
```
crasher:
initial call: rabbit_amqp_writer:init/1
pid: <0.19353.0>
registered_name: []
exception error: bad argument
in function iolist_size/1
called as iolist_size([<<112,0,0,23,120>>,
[82,-15],
<<"pÿÿÿü">>,<<"pÿÿÿÿ">>,67,
<<112,0,0,23,120>>,
"Rª",64,64,64,64])
*** argument 1: not an iodata term
in call from amqp10_binary_generator:generate1/1 (amqp10_binary_generator.erl, line 141)
in call from amqp10_binary_generator:generate1/1 (amqp10_binary_generator.erl, line 88)
in call from amqp10_binary_generator:generate/1 (amqp10_binary_generator.erl, line 79)
in call from rabbit_amqp_writer:assemble_frame/3 (rabbit_amqp_writer.erl, line 206)
in call from rabbit_amqp_writer:internal_send_command_async/3 (rabbit_amqp_writer.erl, line 189)
in call from rabbit_amqp_writer:handle_cast/2 (rabbit_amqp_writer.erl, line 110)
in call from gen_server:try_handle_cast/3 (gen_server.erl, line 1121)
```
This commit fixes this crash by maintaning a floor of zero for
incoming-window in the FLOW frame.
Fixes#12816
The credit_flow between publishing AMQP 0.9.1 channel (or MQTT
connection) and (non-mirrored) classic queue processes was
unintentionally removed in 4.0 together with anything else related to
CQ mirroring.
By default we restore the 3.x behaviour for non-mirored classic
queues. It is possible to disable flow-control (the earlier 4.0.x
behaviour) with the new env `classic_queue_flow_control`. In 3.x this
was possible with the config `mirroring_flow_control`.
(cherry picked from commit d65bd7d07a)
This check is expected to succeed and the status is expected to be
printed to stdout rather than stderr. This change silences the status
output. The status text was printed mistakenly previously because we
captured stderr rather than stdout.
This previously emitted a warning because Elixir will rebind `this_node`
by default, so the `this_node` binding in the line above was unused.
(As opposed to Erlang which would treat this as a match - rejecting
the binding if `this_node` was not equal to the value being matched.)
The node needed to be adjusted as well - `node()` returned the ExUnit
runner's node while the command returned the remote node, which is
stored in the context under `opts.node`.
`rabbit_binary_generator:map_exception/3` will crash when there are
unicode characters in the `explaination` field of `Reason#amqp_error`
parameter. The explaination string (list) is assumed to be ascii, with
each character/member in the range of a byte. Any unicode characters
in the string will trigger `badarg` crash of `list_to_binary/1` in
`rabbit_binary_generator:amqp_exception_explanation/2`.
Amqp091 shovel crash due to this is reported,
https://github.com/rabbitmq/rabbitmq-server/discussions/12874
When a queue as shovel source/destination does not exist, and its
name contains non-ascii characters, the explaination of amqp_error
will be like `no queue non_ascii_name_😍 in vhost /`. It will
subsequently crash and even affect management console.
To fix this, `unicode:characters_to_binary/1` is used instead of
`list_to_binary/1`, and unicode-safe truncation of long explaination
with `io_lib:format/3` chars_limit replaces direct bytes truncation.
The `:io.format/2` call was originally passed a single-quote string
(i.e. a charlist in Elixir terminology) which emits a warning in more
recent Elixir versions:
warning: single-quoted strings represent charlists. Use ~c"" if you indeed want a charlist or use "" instead
└─ nofile:1:12
This warning would pop up a few times when using `make dialyze` within
a deps directory. To resolve it we can switch the quoting so that the
eval string is wrapped in single quotes (equivalent for shell since this
line doesn't use variables) and the format argument is wrapped in double
quotes. This uses a binary in Elixir instead, but that's ok because
`io:format/3`'s `io:format()` parameter may either be an atom, string,
or binary.
This trick was copied from Makefile:49 which uses the same quoting.
[Why]
The test configuration was querying a network interface IP address based
on its name. However, the name, "eth0", is very specific to Linux. This
broke the test on other systems.
[How]
We still have to set an explicit `bind_addr` because Consul refuses to
start if the host has multiple private IPv4 addresses, as it is the case
in CI.
Therefore, we hard-code 127.0.0.1 as the IPv4 address to use because it has a
great chance to exist about anywhere.
[Why]
Two reasons:
1. We need to set the correct feature flags on the test node we have to
start.
2. We can skip Mnesia- or Khepri-specific tests if they are marked.
[Why]
The `run-background-broker` does not wait for the node to be ready,
leading to some transient errors in the testsuite.
[How]
The `start-background-broker` does wait.
While here, export the value of `$(MAKE)`. Otherwise, nested uses of
make(1) may use the wrong make command.
[Why]
The code assumed that the transaction would always succeed. It was kind
of the case with Mnesia because it would throw an exception if it
failed.
Khepri returns an error instead. The code has to handle it. In
particular, we see timeouts in CI and before this patch, they caused a
crash because the list comprehension was asked to work on a tuple.
[How]
We now retry a few times for 10 seconds.
[Why]
We pin a version of Horus even if we don't use it directly (it is a
dependency of Khepri). But currently, we can't update Khepri while still
needing the fix in Horus 0.3.1.
Horus 0.3.1 works around a crash in `cover` that mostly affects CI for
now.
This pinning will have to go away with the next update of Khepri.
[Why]
The `ra:member_add/3` call returns before the change is committed. This
is ok for that addition but any follow-up changes to the cluster might
be rejected with the `cluster_change_not_permitted` error.
[How]
Instead of changing other places to wait or retry their cluster
membership change, this patch waits for the current add to be applied
before proceeding and returning.
This fixes some transient failures in CI where such follow-up changes
are rejected and not retried, leaving the cluster in an unexpected state
for the testcase.
An example is with
`quorum_queue_SUITE:force_shrink_member_to_current_member/1`
This check fails on a virin node, because the metadata store
is not yet ready to handle the query. However, a virin
node by definition can't have any queues, so let's just return
false without asking.
GitHub
Michael Klishin
Michal Kuratczyk
Johan Rhodin
dependabot[bot]
David Ansari
Jean-Sébastien Pédron
Diana Parra Corbacho
Volker Schlecht
Matteo Cafasso
Péter Gömöri
Péter Gömöri
Michael Davis
Ace Breakpoint
Michael Klishin